Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea

Manual Key Start DSE501K Generator Controller Electronics Modul for Deep SeaManual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea Introduction: The model 501K is a Manual Engine Control Module, which is designed to manually control the engine via a key switch on the front panel. The module is used to start and stop engine, indicating fault conditions, automatically s hutting down engine and indicating engine failure by LED giving true first up fault annunciation. Features: Oil Pressure Monitoring Engine

Manual Key Start DSE501K Generator Controller Electronics Modul for Deep Sea

Introduction:
The model 501K is a  Manual Engine Control Module, which is designed to manually control the  engine via a key
switch on the front panel. The module is used to start and stop engine,  indicating fault conditions, automatically s
hutting down engine and indicating engine failure by LED giving true first  up fault annunciation.

Features:
Oil  Pressure Monitoring
Engine Temperature Monitoring
Overspeed Protection
Charge Failure Warning
　
DC Supply:9 to 33 V Continuous.   
Cranking Dropouts:Able to survive voltage dips during cranking.   This is achieved without the need
for internal batteries.   
Alternator Input Range:15 - 305 V AC RMS
Alternator Input Frequency:50 - 60 Hz at rated engine speed.   
Magnetic Input Range:0. 5 V to +/- 80 V  
Magnetic Input Frequency:2300Hz to 6000 Hz at rated engine speed.   
Start Relay Output:16 Amp DC at supply voltage.   
Run Relay Output:16 Amp DC at supply voltage.   
Alarm Output:1 Amp DC at supply voltage.   
Dimensions:72 X 72 X 118. 5 (Excluding Key-switch)   
Operating Temperature Range:-30 to +70°C  
Installation:
Front panel mounting via suitable cut-out.
Retaining clips supplied.
Cable connections via locking plug and socket type connectors.  
Calibration:Speed trip setting and meter calibration adjustment potentiometer are accessible
from the rear of the module