Ships within 48 hours · Estimated delivery Aug 24 - Aug 29
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
APEX FL-5 | 18" x 9" ET30 | 5x120mm | 72.56mmAPEX Race Parts designs and manufactures high performance, flow formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high quality performance parts that meet the demands of racing and street performance enthusiasts. FOR WHEEL FITMENT GUIDE https: apexwheels. com fitment
APEX Race Parts designs and manufactures high performance, flow-formed and forged wheels for a growing list of vehicle makes. They are constantly expanding their product line with new wheel designs, wheel accessories and other performance and race parts. It is their mission to produce and distribute high-quality performance parts that meet the demands of racing and street performance enthusiasts.
ModelFL-5 Wheel QuantitySold Individually Wheel Diameter18" Wheel Width9.0" OffsetET30 Bolt Pattern5x120mm Centre Bore72.56mm Load Rating1,550lbs Weight19.5lbs (8.84kg) Face ProfileMedium Lip Wheel ConstructionFlow Formed
A FITMENT FOR YOU
Need help selecting the proper wheel fitment for your BMW? APEX Race Parts have tirelessly test-fitted hundreds of setup combinations in order to provide direct-fit, spacer-free wheel packages for everything from showroom-fresh cars to all-out race builds. Their detailed fitment guides help you avoid costly trial-and-error and walk you through every step of finding your perfect setup.
Fit Matters The right solution for every application
The FL-5 wheel includes details specifically implemented to enhance the BMW owners' track day and street performance experience. An optimized car setup begins with the right wheel and tyre fitment, and without model-specific attention, maximum performance is compromised. These wheels were developed for various BMW chassis’s and will work in either square or staggered configurations.
Lip Sizes One design, many levels of beauty
Available with shallow, medium, and deep lip sizes. This maximizes spoke concavity and reduces weight on the FL-5 design. Lip depth is dependent on fitment, and not selected independently.
"I" Beam Spokes More than just a pretty face
The spokes of the FL-5 were designed to be robust where they need to be, and extra lightweight where they should be. Weight is reduced by CNC machining material out from the sides of each spoke. It’s expensive and avoided by almost every manufacturer, but affordable with volume. In each size of the FL-5 designs, the I-beam spokes are carefully evaluated from structural aspects to ensure minimal weight, brake clearance, and remarkable strength.
Dual Flow Formed Strength is the key
APEX use rotary forging for both the front and rear barrels on the FL-5 wheel designs. This produces the strongest lips possible, and APEX can optimize the depth of the front lip for every unique width and offset.
Beefier Lip Ready for more abuse
By saving weight elsewhere, APEX have added extra material where it counts. They've beefed up the barrel’s inner lip on the FL-5 to better handle the repetitive abuse seen on the track.
Hub Centric No rings or adapters here
All APEX FL-5 wheels are purpose built for select vehicle applications, and centering rings are never required for any BMW application. All 5x120mm bolt pattern wheels feature a direct-fit, 72.56mm centre bore.
Brake Clearance A lot of room in a tight space
Spoke clearance is only half the problem. The barrel construction on a wheel also needs to be big enough to clear the sides of your caliper and rotor. Many aftermarket wheels that have aesthetic compromises in their design may work with smaller stock brakes, or smaller diameter big brake kits, but the larger kits will pose a major problem. The barrel of the FL-5 wheel offers unmatched caliper clearance because wheels shouldn’t limit your choice of aftermarket brake kits, and brake kits shouldn’t force you to run oversized wheels. APEX 2D modeled most Big Brake Kits available in Solidworks and tweaked the wheel design of the FL-5 prior to production in order to fit as many kits as possible.
Wheel Hardware Original or Aftermarket, it all works
The FL-5 wheel can be used with all OEM and aftermarket mounting hardware with a 60° tapered seat. Lug bolts, wheel locks, and stud conversion kits all work perfectly. The FL-5 wheel also accepts wheel spacers without issue. The shallow rear chamfer allows the wheel to remain hub centric even when 5mm flat spacers are used. The chamfer is deep enough to clear the chamfered lip found on some aftermarket spacers that would typically cause improper seating of the wheel and, therefore, wheel vibration.
Centre Cap A factory fit and finish
APEX don't reuse one cap design for all of their wheels. Every APEX wheel is designed to work with factory centre caps. You can easily replace APEX centre caps with OEM roundels for a clean factory look. APEX wheels will come with the redesigned, Gloss Black centre cap that mimics the size and shape of a BMW factory centre cap.
TPMS Sensors They all fit
TPMS sensors, which monitor tyre pressure, are one piece of technology that can't be compromised. The attention to OEM compatibility on the FL-5 wheel doesn't end with centre caps. All APEX wheels accept OEM and aftermarket equivalent TPMS sensors, and any standard sized metal or rubber valve stem.
THE APEX STANDARD
Flow Forming Benefits of forging, without the pain
These APEX wheels are produced using a manufacturing process known as flow forming. This process significantly reduces weight in the barrel, which has the greatest impact on rotational mass. During the manufacturing process, rollers apply high pressure to the inner barrel, compressing the aluminium into its final shape. This effectively eliminates porosity and aligns the grain structure of the metal, which increases tensile strength. The end result is a lightweight and extremely strong barrel that equals that of a traditional forged wheel at a fraction of the cost.
Testing & Certifications Verifiable 3rd party testing
Many companies promote their wheels as being certified by the VIA when they actually aren’t. That’s like using the USDA logo on food without permission. APEX wheels get officially tested and registered by the VIA in Japan, and they have the proof to back it up.
Japan’s JWL is a commonly followed standard for wheel load ratings. The APEX flow formed wheels meet, and most exceed, their load rating requirements. Most manufacturers only meet the minimum while some don’t even do that. Check and verify load ratings before you buy.
Weight & Strength Optimization It’s all in the details
APEX took more time than ever before on this step, revising and iterating their design to reduce weight as much as possible. After many months of BMW-specific optimizations, APEX minimized weight while maximizing strength. The result is a lightweight wheel with extra strength in all the right places. Use the FL-5 with confidence on both street and track.
Finishes Because being faster is just not enough
The FL-5 wheels are available in multiple finishes. All APEX wheels are finished using a comprehensive multi-stage liquid paint system over a powder coated base coat. Standard finishes include gloss-metallic finishes, and semi-gloss or matte finishes.
Often overlooked, painted or powder coated lug hole seats can cause hardware to loosen or begin the spread of paint chipping to more visible sections. The coating process of the wheels leaves lug holes, centre bores and mounting pads untouched, which ensures proper fit and torque values.
Lifetime Warranty A wheel you can depend on
As of recent, all APEX wheels now come with a lifetime structural warranty and 1 year finish warranty, so you can be confident in your purchase. Please contact us for the full terms and conditions.
Models
1 Series / E82 / E88 (2007-2013) / 1 Series M (1M)
Size: Large, Color: Skinny Green, Size: Large, Color: Skinny Green
Best toy ever! My dog destroys toys. Usually within about 15 minutes, she has de-squeakered and defluffed them. By the second day, she has tug-of-war-ed them to shreds.
From the time we got this adorable dragon out of the package, she LOVED it. She set to work. It’s been a week, and while she has dewinged him, he lost his squeaker after a few days, and he looks a bit rough, he’s still in one piece! And, we’ve had HOURS of tug-of-war with minimal rips! She’s obsessed 😍 I ordered two more today. We’ve finally found the perfect toy for my baby!
I ordered a plethora of new toys for Bruce to keep him occupied while I am working remotely from home. Poor guy gets so bored while I'm stuck in front of my computer 8+ hours a day. All the other toys are animated, but this one is just a big floppy chewy squeaky toy. Bruce quickly lost interest in all the other chirping, hopping, and twirling toys and fell in love with "Diny". When I opened Diny and gave it to Bruce, he had the elated and surprised look of a 3 yr old at Christmas. And he stayed that happy for hours, and then each time he picked up Diny to play. Diny became his go-to toy over all others (and there are many!). It is well made out of durable fabric, and they did not stuff it full of kapoc (I hate kapoc in dogs toys!). And it is delightfully low-tech. Normally he tears a squeaky toy apart as soon as he can isolate the squeaky mechanism. But cleverly, the squeaky box is loose in the long belly so it moves from one end to the other as the toy is handled. That made it difficult for Bruce to locate it. The toy remained in good condition for 2 weeks of near constant attention by Bruce. But yesterday he zeroed in on the squeaky box and ripped Diny to shreds. I was sad to see Diny go so soon. But boy-howdy was Bruce happy with it. I'm gonna buy another because we liked it so much. And so did I : )
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2024
J
Verified Purchase
Jason W
Cuba, US
★★★★★ 5
This is one “under the radar” gem!!
Size: Large, Color: Coral
This is one “under the radar” gem!! Very strong internal squeaker and way tougher than it looks. My big 125lb Shepard-Husky mix gave it heck, then made it his new buddy. He’ll occasionally give it the business but on the whole, it’s surprisingly tough and my big boy loves it. Nice price!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
H
Verified Purchase
H
Natrona Heights, US
★★★★★ 4
Cute but small
Size: Large, Color: Skinny Green
Cute stuffy and has not yet ripped. While my dogs plays with it, the toy is a bit small for him. For reference he is 120lbs.
My puppy (8 month old black lab mix) loves, loves, loves her dragon. She has had it for 2 months now. It is one of her favorites and gets daily rough play time. It's her go-to toy for fetch and tug games, as well as just general mouthy play. The squeaker gave out after about 4 weeks, but she would binge squeak for prolonged periods (kind of like chomping on gum) so it was almost a blessing when it went silent. She still chomps on it, but at least now I don't have to hear it. Other than the fact that it's a little grungy and bedraggled from so much loving, it is still in amazing shape. The seams and fur are all still intact. There are no visible holes, rips, or weak spots. I love Chew Guard Technology.
This dragon replaced her goDog Iguana (from PetSmart) that developed a tear in the fur after about 4 months of heavy use. (It was superficial, just the outer fur layer and not the innards, but we disposed of it before she could eat more fur.) She can be pretty rough on her toys and I can never predict if any given toy will last minutes or months. The goDog stuffies definitely fall into the "months" category, even with rough daily use.
Edit: The dragon lasted about 6 months of intensive, hard play before it developed a small tear in the fur. I patched it a couple times, but once my pup discovers a weak spot, it's the kiss of death for any stuffed item. We had to dispose of the dragon (so sad) to keep her from eating any more of the fur. We replaced the dragon with the goDog Chameleon, which is still going strong. I think we will go back to the dragon for our next toy because it's just so darned cute. We gave the dragon to my niece for her golden retriever puppy who is very chew-happy. That dragon is also doing well. You've just gotta love that chew-guard technology. This is one tough toy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2015
,
and
Promo Codes Available: