12V LED Power Supply Driver 60W 5A with US Standard 3-Prong Plug - AC 100-240V to 12V DC Constant Voltage Transformer (IP67 Waterproof)

12V LED Power Supply Driver 60W 5A with US Standard 3-Prong Plug - AC 100-240V to 12V DC Constant Voltage Transformer (IP67 Waterproof)12V 60W LED Power Supply Transformer (IP67 Waterproof) Key Features Plug and Play AC Input: Comes pre wired with a standard US 3 prong grounded wall plug and a wide input voltage range (100 240V AC), completely eliminating the need for dangerous, high voltage hardwiring. IP67 Waterproof Rating: The internal circuitry is fully encapsulated in a premium polyurethane resin and housed inside a rugged aluminum alloy casing. It is 100% protected against

12V 60W LED Power Supply Transformer (IP67 Waterproof)

Key Features

• Plug-and-Play AC Input: Comes pre-wired with a standard US 3-prong grounded wall plug and a wide input voltage range (100-240V AC), completely eliminating the need for dangerous, high-voltage hardwiring.
• IP67 Waterproof Rating: The internal circuitry is fully encapsulated in a premium polyurethane resin and housed inside a rugged aluminum alloy casing. It is 100% protected against dust, humidity, heavy rain, and temporary water submersion.
• Constant Voltage Output: Delivers a smooth, flicker-free 12V DC output, crucial for maintaining the lifespan and color consistency of delicate LED strip lights and modules.
• Silent & Fanless Design: The extruded aluminum casing acts as a heavy-duty heatsink, dissipating internal heat naturally. This allows for completely silent operation with no moving parts or noisy cooling fans to fail.
• Comprehensive Safety Suite: Built with automatic protection mechanisms that immediately cut power in the event of a short circuit, over-load, over-voltage, or excessive thermal temperature, automatically resetting once the fault is cleared.

Product Specifications

• Input Voltage: 100-240V AC (50/60Hz).
• Output Voltage: 12V DC (Constant Voltage).
• Maximum Output Current: 5 Amps.
• Maximum Power: 60 Watts.
• Ingress Protection: IP67 (Indoor & Outdoor Safe).
• Connections: AC 3-Prong US Plug (Input) / Bare Red & Black Wires (Output).

Compatibility & Applications

This rugged, weather-resistant power driver is perfect for powering 12-volt direct current electronics in demanding environments:

• Outdoor LED Lighting: Powering waterproof LED strip lights for patios, deck perimeters, step lighting, and architectural accent lighting.
• Landscape Lighting: Ideal for 12V garden spotlights, pathway lights, and water feature illumination.
• Indoor Projects: Under-cabinet kitchen lighting, bathroom vanity mirrors, and custom closet LED illumination where moisture or steam is present.
• Security Systems: Provides stable, reliable 12V power to outdoor CCTV security cameras.

Installation & Safety Tips

• The 80% Rule (CRITICAL): To ensure the longest possible lifespan and prevent overheating, never load a power supply to 100% capacity. You should only run a maximum of 48 Watts (80% of 60W) continuously on this transformer.
• Observe DC Polarity: When splicing your LED strips to the output side of this driver, strictly match the Red wire to Positive (+) and the Black wire to Negative (-). Reversing this will not damage the LEDs, but they will fail to light up.
• Waterproof Your Splices: While the power supply block itself is waterproof, the bare wire connections you make to your lights are not. You must use adhesive-lined heat shrink tubing or waterproof silicone wire nuts to seal your connections.
• Do Not Submerge Permanently: IP67 means the unit can survive temporary shallow submersion (like a heavy puddle), but it is not designed to operate permanently underwater (like sitting at the bottom of a pond). Mount it off the ground where water can drain.
• Not for Dimmable Switches: This is a standard constant-voltage driver. You cannot wire this to an AC wall dimmer switch. To dim your lights, you must install a 12V DC inline LED dimmer on the low-voltage output side of the transformer.