2017-2024 CAN-AM Replacement Filter (66-6005)

2017-2024 CAN-AM Replacement Filter (66-6005)Description Using their proprietary dry synthetic media, the S&B filter flows better than stock and provides more air to the filter. This Dry filter is super easy to clean. Just follow the cleaning instructions and your filter will be given another chance at life. If the media or rubber looks damaged it is time for a new filter and do not re use. To Clean Filter: Step 1: First, make sure to wear protective eyewear throughout the cleaning process.

Description

Using their proprietary dry synthetic media, the S&B filter flows better than stock and provides more air to the filter.

This Dry filter is super easy to clean. Just follow the cleaning instructions and your filter will be given another chance at life. If the media or rubber looks damaged it is time for a new filter and do not re-use.

To Clean Filter:

• Step 1: First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.
• Step 2: Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30 psi.
• Step 3: Use the nozzle to blow out the outside of the filter at an angle to remove any large debris that was not removed in Steps 1 and 2. Be careful not to blow debris back into the media. Then blow out once more from the inside out.
  

If you want to maximize the airflow of your filter, it is recommended to complete the following steps every other time you service your filter.

• Step 4: Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.

• Step 5: Wash the outside of the filter to remove any remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

  You should dispose of the filter after servicing it 10 times in order to ensure your engine is properly protected. Prior to you reinstalling your air filter, carefully inspect the cage, pleats and silicone rubber for any damage. If you see any damage to the cage, pleats or rubber, DO NOT use the filter!

Part Number: 66-6005

Features

• Dry cleanable
• Step-by-step instructions

Videos