Pay in installments of $2000.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 25 - Jul 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Anritsu MW82119A PIM Master Passive Intermodulation Analyzer. Stock number: AN119APackage includes: Anritsu MW82119A PIM Master Passive Intermodulation Analyzer Armored Test Port Cable RS232 PC Interface Cable Power Cord AC Adapter Charger Description: Anritsu introduces the first fully integrated Passive Intermodulation (PIM) Analyzer suitable for commissioning and maintaining global wireless networks. This high performance, battery operated unit allows operators to fully characterize infrastructure quality by measuring Return
Package includes:
- Anritsu MW82119A PIM Master Passive Intermodulation Analyzer
- Armored Test Port Cable
- RS232 PC Interface Cable
- Power Cord
- AC Adapter/Charger
Description:
Anritsu introduces the first fully integrated Passive Intermodulation (PIM) Analyzer suitable for commissioning and maintaining global wireless networks. This high performance, battery operated unit allows operators to fully characterize infrastructure quality by measuring Return Loss, VSWR, Cable Loss, Passive Intermodulation, Distance-to-Fault, and Distance-to-PIM with a single test instrument.
Financing:
Apply for financing. Low monthly payments.
We accept trade-ins:
We make trades local dealers cannot match. Trade up, trade down with cash-back, or sell your used equipment. Contact us to see what we can do for you!
Warranty:
We offer 30 day warranty. Take the stress out of buying used equipment.
Next-day delivery within USA:
Avoid downtime. Request one-day delivery and get remote display the next day.
We ship worldwide:
We ship worldwide and offer flexible international shipping rates. We work with the freight forwarder of your choice or help you to choose the most suitable one.
Anritsu MW82119A specifications:
| Measurements | |
| Measurements | PIM vs. Time Noise Floor Distance-to-PIM Swept PIM |
| Setup Parameters | |
| Frequency | Carrier F1, Carrier F2, Intermodulation Order |
| Amplitude | Ref Value, Scale, Auto Range (On/Off), Amplitude Tone (On/Off) |
| Setup | Output Power, Test Duration (1 s to 1,200 s) |
| Limit Lines | Limit (Upper/Lower), On/Off, Limit Move, Limit Alarm (On/Off, PASS/FAIL indicator) |
| Markers | Markers 1–6 (On/Off), Delta Markers 1–6 (On/Off), Marker to Peak/Valley, All Markers Of |
| GPS | On/Off, 3.3/5.0 V |
| DTP | Cable Velocity, Distance |
| Save/Recall | Setups (.stp), Measurements (.pim), Limit Lines (.lim), Screen Shots (.jpg) (save only) |
| PIM Measurement Ranges | |
| Test Method | Reverse (reflected) Passive Intermodulation (PIM) per IEC-62037-1 |
| Intermodulation Order | 3rd, 5th, and 7th order, when in receive band (user selectable) |
| RF Test Power |
Two CW tones 25 dBm to 46 dBm, 0.1 dBm steps Accuracy: ±0.5 dB (excluding uncertainty) |
| RF Test Frequency | Accuracy: ±1.0 ppm at 23 ºC Stability: ±1.0 ppm from –10 ºC to +55 ºC, typical Aging: ±1.0 ppm/yr aging, typical |
| Residual PIM Performance | <–117 dBm, <–125 dBm typical (2x 43 dBm test tones) |
| PIM Measurement Range | –70 dBm to –130 dBm |
| General Specifications | |
| PIM Master Connectors | |
| PIM Test Port | 7/16 DIN, female, 50 Ω |
| Dual USB Type A | 2x Type A (connect USB Flash Drive and USB Power Sensor) |
| USB Mini-B | 1x Mini-B (connect to PC for data transfer) |
| GPS | SMA, female (with GPS option only) |
| External Power | 2.1 mm x 5.5 mm barrel connector, 12 VDC to 15 VDC, < 5.0 A |
| PIM Test Port Damage Level | +10 dBm (10 mW) continuous, (PIM Rx band) +35 dBm (3 W) continuous, (PIM Tx band)* |
| IM2/1900 MHz in Test Port | Type N, Female, 50 Ω (Option 902 and Option 600) |
| IM2/1900 MHz in Test Port Damage level | +10 dBm (10 mW) continuous, (IM2/1900 MHz Rx band) |
| VNA Test Port | Type N, female, 50 Ω (Option 331) |
| VNA Test Port Damage Level | 40 dBm continuous |
| Display | |
| Size | 213 mm (8.4 in) touch screen |
| Resolution | 800 x 600 |
| Pixel Defects | No more than five defective pixels (99.9989% good pixels) |
| Battery | |
| Type | Li-Ion |
| Battery Operation | 3.0 hours, typical |
| Charging Limits | While charging, battery must be 0 °C to +45 °C, Relative Humidity ≤ 80 % |
| Power | |
| AC/DC Adapter | Input: 100VAC to 240 VAC, 50/60 Hz Output: 12 VDC |
| Environmental | |
| Operating Temperature Range | –10 ºC to 55 ºC |
| Storage Temperature Range | –51 ºC to 71 ºC |
| Maximum Relative Humidity | 95 % RH at 30 ºC, non-condensing |
| Vibration, Sinusoidal | 5 Hz to 55 Hz |
| Vibration, Random | 10 Hz to 500 Hz |
| Half Sine Shock | 30 g |
| Altitude | 4600 meters, operating and non-operating |
| Explosive Atmosphere | MIL-PRF-28800F, Section 4.5.6.3 MIL-STD-810G, Method 511.5, Procedure 1 |
| Ingress Protection (IP) | IP54, IP67 when enclosed in optional transit case |
| ESD | |
| PIM Test Port Connector Center Pin | Withstands up to ±15 kV |
| VNA RF Out Connector Center Pin | Withstands up to ±15 kV |
| Size and Weight | |
| Size | 350 mm x 314 mm x 152 mm (13.8 in x 12.4 in x 6.0 in) |
| Weight | 9.2 kg to 12.4 kg (20 lb to 27 lb), varies by frequency option |
In stock and job-site ready. Package components available for individual sale. Overnight shipping available.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy