SKU: 87031497251

MCS, 12V SEALED AGM BATTERY. 20AH. 320CCA

Sale price$176.40 Regular price$196.00
Save 10%

Pay in installments of $49.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 25 - Jul 30

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

MCS, 12V SEALED AGM BATTERY. 20AH. 320CCA12 Volt, 20Ah. 320 CCA (Cold Cranking Amps). Dimensions: 176mm long x 87mm wide x 155mm high. Motorcycle Storehouse AGM (Absorbed Glass Mat) batteries are of excellent quality, sealed and maintenance free. They offer a strong starting capacity, better than compatible flood acid type batteries. AGM batteries are charged during production but will require a re charge before installation. Note before installation: Never(!) attempt to start the engine

12 Volt, 20Ah. 320 CCA (Cold Cranking Amps). Dimensions: 176mm long x 87mm wide x 155mm high. Motorcycle Storehouse AGM (Absorbed Glass Mat) batteries are of excellent quality, sealed and maintenance free. They offer a strong starting capacity, better than compatible flood acid type batteries. AGM batteries are charged during production but will require a re-charge before installation. Note before installation: Never(!) attempt to start the engine before you have fully charged your new battery, to prevent irreversible damage that will ultimately shorten its life span. It is absolutely mandatory to fully charge any new AGM battery before installation. After production AGM batteries are factory activated and will, during storage, slowly discharge. Re-charge at least every 3 months. Recharging sooner may be required in hotter or cooler temperatures. Vehicle electronics like a clock, alarm etc. will additionally drain an installed battery. AGM batteries will not handle a too deep discharge well. Keep them charged at a minimum of 12.4V for best performance through its life span. Connect the battery to a suitable automatic 'maintenance charger' when not in use for a period of time to retain the optimum charge level.

Fits: > 97-22 Softail; 97-17(NU)Dyna; 97-03(NU)XL; 07-17(NU)V-Rod (excl. 2007 VRSCR); all Buell S1, S3, ST, M2, X1

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 87031497251

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
Verified Purchase
franny
Grantham, US
★★★★★ 5
Great project & great quality
Size: 38"Height × 14" Wide, Size: 38"Height × 14" Wide
These legs were used on a 26”x72” DIY quilting ironing table. The Mdjwjj Industrial Pipe Counter Bar Height Table Leg, Metal Table Legs, Iron Base are sturdy & made of real metal, nothing cheap about this product. Legs were easy to install. Highly recommend
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025
S
Verified Purchase
Sammy.
Dallas, US
★★★★★ 5
Very good
Size: 38"Height × 14" Wide
It look nice and it worked very good, build strong
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 6, 2026
K
Verified Purchase
K Younger
Birmingham, US
★★★★★ 5
Do it yourself
Size: 38"Height × 14" Wide
I purchased a similar set to custom make a dining room table out of butcher block, and it turned out perfect. So with the left over butcher block I purchased these legs and made the perfect kitchen island to match. It is very sturdy and a great price. Everyone wants to know where I purchased it from. I also put a piece of the butcher block across the lower bars and made a lower shelf. Love love love this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
T
Verified Purchase
Tani
Carnegie, US
★★★★★ 4
Plan your project right & these will look great!
Size: 38"Height × 14" Wide
These are great legs for a table. They are sturdy and go together nicely. The painted finish is well done, meaning it doesn't scratch or peel or come off easily. Also the way things were packaged was considerate of the weight and possibility of damage during shipment. There were even extra attachment screws included which was helpful since I lost one under the dishwasher. When considering what legs to purchase for your particular table, the height, dimensions, and weight of the top all need to be factored in. I used these bar height legs under a very heavy, 7' long X 2' wide top. Common physics dictates that there will be lateral movement between the 2 "H" shaped leg sets. There HAS to be support between the 2 H leg sets to prevent that lateral movement. So these alone will not support a long table very well, because physics. This is not in any way the fault of this product. Be aware that there is more to the stability equation and be prepared to add cross bracing to your project.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2025
A
Verified Purchase
Amazon Customer
Port Orchard, US
★★★★★ 5
Hold my computer desk top repaired
Size: 38"Height × 14" Wide
Counter height table legs are sturdy and it holds a great amount of weight. I was easy to adjust height for the table we needed to be repaired with legs. It was a great choice in repair of computer desk. I had a desk that tore apart because of the press board siding. Took the top of of siding and repaired with these legs. I am totally satisfied
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2025

recommand products