SKU: 79804971274

CTRX 60MM External Wastegate 7 PSI (916000-1)

Sale price$314.55 Regular price$349.50
Save 10%

Pay in installments of $87.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

CTRX 60MM External Wastegate 7 PSI (916000-1)Large Frame Boost Control. Maximum Flow. The Comp Turbo CTRX 60 External Wastegate is built for high horsepower applications that demand exceptional flow capacity, precise boost control, and extreme durability. Featuring a large 60mm valve, the CTRX 60 delivers unmatched exhaust management, stable pressure regulation, and superior thermal performance even in the most aggressive racing environments. The CTRX 60 features optimized airflow geometry,

Large-Frame Boost Control. Maximum Flow. 

The Comp Turbo CTRX 60 External Wastegate is built for high horsepower applications that demand exceptional flow capacity, precise boost control, and extreme durability. Featuring a large 60mm valve, the CTRX 60 delivers unmatched exhaust management, stable pressure regulation, and superior thermal performance even in the most aggressive racing environments.

The CTRX 60 features optimized airflow geometry, enhanced heat resistance, and robust construction for high-boost, high-temperature applications. Whether you’re running compound turbos, big-frame singles, or a high-power twin setup, the CTRX 60 provides the control and reliability needed to keep your combination performing at peak efficiency.

Key Features

  • 60mm high-flow valve for maximum exhaust control in high horsepower set ups
  • 360° adjustable actuator housing for clean and flexible reference line routing
  • Dual locking V-band system for a secure, leak-free connection
  • Multiple 1/8” NPT reference ports for adaptable boost-control strategies
  • Optional liquid cooling provision for extreme heat management needs
  • Complete spring pack included for precise pressure calibration
  • Direct fit compatibility with most 60mm V-band wastegate applications

Built for Big Power

Designed for serious street, drag, and motorsport builds, the CTRX 60 excels in high-boost environments with consistent control, repeatability, and long service life.

What's Included:

  • Wastegate unit with spring installed Full Spring set (3, 5, 7)
  • Locking collar Tool 
  • SS 316 valve seat
  • Strap-type V-band clamps
  • Inlet & outlet weld flanges
  • Hose tail & blank fitting kit 1/8″ NPT fittings and plugs
  • CT decal

 

CTRX 60mm Wastegate – Limited 2-Year Warranty

1. Warranty Summary

Comp Turbo Technology Inc. (“CTI”) warrants the CTRX 60mm Wastegate to be free from defects in materials and workmanship under normal operating conditions for a period of two (2) years from the date of retail purchase.

During this warranty period, CTI will, at its discretion, repair or replace any covered wastegate that is determined to be defective, at no charge to the customer, excluding shipping costs.

2. What This Warranty Covers

This warranty applies to manufacturing-related defects only, including:

  • Structural defects in the wastegate body, valve, or diaphragm
  • Manufacturing or machining defects
  • Defects in assembly (e.g., improperly installed internal components)
  • Premature failure of the valve guide, diaphragm, or actuator components under normal, recommended use
  • Any defect that prevents proper boost control operation and can be traced back to manufacturing or assembly error

Wastegates repaired or replaced under this warranty receive coverage for the remainder of the original warranty period.

3. What This Warranty Does NOT Cover

The warranty does not cover damage or failure resulting from:

  • Incorrect installation, improper tightening of cap ring, or installation performed against CTI’s recommended procedures
  • Disassembly of the wastegate beyond recommended service steps
  • Use of non-CTI springs, diaphragms, or components
  • Modifications, porting, machining, polishing, coating, or anodizing performed outside CTI facilities
  • Damage caused by debris, foreign objects, or lack of maintenance
  • Racing accidents, collisions, fire damage, or any external cause not related to a manufacturing defect

4. Warranty Void Conditions

Warranty becomes void if:

  • The product is altered, tampered with, or disassembled improperly
  • Serial numbers or identification markings are removed or damaged
  • The wastegate is used beyond its intended operating pressure or temperature range
  • Damage results from installation on a system producing more power or heat than the wastegate is rated for
  • Failure occurs due to improper routing or omission of cooling lines (if used in high-heat applications)

5. Warranty Claim Procedure

To submit a warranty claim:

  1. Contact CT to obtain an RMA Number (Return Material Authorization).
  2. Provide proof of purchase (invoice, email receipt, or dealer order confirmation).
  3. Send the wastegate to CTI’s inspection facility with the RMA number clearly marked.
  4. CTI will inspect and test the product to determine warranty eligibility.
  5. Approved warranty items will be repaired or replaced free of charge (customer covers inbound and outbound shipping).

Inspection typically takes 5–10 business days from the date the product is received.

6. Limitation of Liability

CTI’s liability is limited strictly to the repair or replacement of the wastegate. CTI is not responsible for:

  • Labor costs
  • Vehicle downtime
  • Engine or turbocharger damage resulting from improper installation or tuning
  • Incidental or consequential damages of any kind

No other expressed or implied warranties exist beyond the terms stated here.

CTRX 60 mm External Wastegate

Installation Instructions

Thank you for choosing the Comp Turbo CTRX 60 mm External Wastegate. This wastegate is designed for high-performance turbocharged applications and is suitable for street, strip, and motorsports use when installed correctly.

IMPORTANT NOTES

  • Professional installation is strongly recommended.
  • Ensure the engine and exhaust system are cool before installation.
  • Improper installation may result in boost control issues or engine damage.
  • Base spring pressure represents the minimum boost level achievable without electronic boost control.

WHAT’S INCLUDED

  • CTRX 45 mm Wastegate assembly
  • Pre-installed base spring (as ordered)
  • Additional springs (for tuning base pressure)
  • V-band connections (if supplied with your kit)
  • Multiple 1/8″ NPT boost reference ports

(Included hardware may vary by vendor—verify contents before installation.)

MOUNTING & PLACEMENT

  • Install the wastegate on the exhaust manifold or turbo collector, as close to the turbine inlet as possible.
  • Ensure the wastegate valve sees smooth, direct exhaust flow. Avoid sharp angles or dead-end placement.
  • Position the wastegate so the valve stem is vertical or angled slightly upward when possible.
  • Secure the wastegate using the V-band clamp(s) and ensure all connections are tight and centered.

SPRING CONFIGURATION

  • The wastegate ships with a base spring installed (example: 7 psi).
  • Base boost pressure = spring pressure only (no controller influence).
  • To change base pressure:
    • Remove the top cap carefully.
    • Add or remove springs as needed.
    • Reinstall the cap and tighten evenly.

Always ensure the cap and ring are fully seated and tight.

BOOST REFERENCE & PLUMBING

  • The bottom port should be connected to a boost pressure source (compressor housing or intake manifold).
  • The top port is used for:
    • Electronic boost control
    • CO₂ or compressed air control
  • Unused ports must be properly plugged.

Basic setup (spring-only):

  • Boost source → bottom port
  • Top port → plugged

COOLANT PORTS (IF EQUIPPED)

  • Coolant ports are optional and not required for operation.
  • If used, plumb into a low-pressure coolant circuit.
  • Do not cap coolant ports unless specified.

FINAL CHECKS

  • Verify all V-bands, fittings, and plugs are tight.
  • Confirm there are no exhaust or boost leaks.
  • Start engine and check for proper operation.
  • Monitor boost during initial test drive.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 79804971274

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 28 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Y
Yolanda
San Leandro, US
★★★★★ 5
Cooling Blanket for Hot Sleepers, Soft Lightweight Comfort with a Cool-to-the-Touch Feel
This reversible cooling blanket is a great option for anyone who sleeps warm. It’s incredibly soft, very lightweight, and has that instantly cool-to-the-touch feel that makes it especially comfortable for hot sleepers. What I liked most is how airy and breathable it feels without being heavy or stuffy. It’s comfortable enough to use all night and gives that nice cooling sensation when you first pull it over you. The softness also makes it feel cozy without sacrificing the lightweight design. My only real wish is that it came with a matching pillowcase, because that would make it feel even more complete as a sleep set. Pros: Extremely soft and comfortable Cool to the touch Lightweight and airy feel Great for hot sleepers Breathable without feeling heavy Cons: Does not include a matching pillowcase Verdict: If you tend to sleep hot, this is a really nice lightweight cooling blanket. It’s soft, breathable, and comfortable with a refreshing cool feel. I just wish it included a pillowcase to make the set feel complete
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 4, 2026
B
Verified Purchase
Bata
Fort Morgan, US
★★★★★ 4
Cool & comfy
Color: Dark Gray Seersucker, Size: King(108"x90")
Cool but not as cold as I wanted Very soft and comfy though
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
L
Lola D.
Louisville, US
★★★★★ 5
Cooling Blanket is a sleep saver for me!
This is the second product I have used from bedsmile and as with the other one, this is a great product! It truly is a cooling blanket. I am a very hot sleeper and live in a hot, humid climate, so this has been a sleep saver for me! One side is silky smooth and feels so good on your skin. The other side has a texture to it which is great if you want to use it as your only bedding, which I do. It covers well and hangs over the edges as it should. I ordered the white one and it is bright and unblemished. The silky side magically feels much cooler than typical bedding and keeps me cooler during the night. It is lightweight but heavy enough to make you feel that you are "under the covers". In my opinion, putting additional covers over it would defeat the purpose but if you live in a cooler climate, it would still be beneficial to use this blanket as the silky coolness would help get a good night's sleep anywhere. Another great benefit of this product is that it does not have any strange odors when unpacking. I did wash it before using, but honestly, I am not sure it was necessary.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 20, 2026
P
Verified Purchase
Paubla Maya
Omaha, US
★★★★★ 5
Incredible Value - Soft, Stays in Place, and Military Son Approved!
Size: California King, Size: California King
I purchased this mattress topper for under $27 and I'm so impressed that I'm planning to buy another one! Easy Installation & Perfect Fit: This topper was incredibly easy to put on, and it fits my California King mattress perfectly. The 18-inch deep pockets ensure it stays in place - I can move around on the bed and it doesn't shift at all. Comfort: The topper is wonderfully soft and has made a noticeable difference in our sleep quality. My husband absolutely loves it, and we both wake up feeling more rested. The Ultimate Test: My son recently came home after being deployed for a year. He slept on our bed for hours and immediately commented on how soft and comfortable it was. That's saying something for someone who's been sleeping on military accommodations! He was so impressed that he's planning to buy one for his ship. Bottom Line: For the price, comfort, and quality, I recommend this 100%. It's hypoallergenic, stays in place, and has exceeded all our expectations. You can't go wrong with this purchase!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 5, 2025
P
Verified Purchase
Pat Onstott
Carnegie, US
★★★★★ 5
Nice mattress Topper Pad
Size: Queen
Met my expectations and was just as advertised. Good fit; comfortable.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 20, 2026

recommand products