,
and
Promo Codes Available:
CONNECT EVERYTHING
The C 379 is well equipped with a variety of analogue and digital connectivity options including aptX HD Bluetooth, HDMI eARC, MM Phono stage, and two subwoofer outputs. aptX HD can easily support 24-bit streaming from any Bluetooth enabled device, while HDMI eARC allows you to connect the C 379 to your TV and provide seamless control from your existing remote. It also includes a built-in high-performance headphone amplifier with low output impedance and high output voltage capability, allowing it to drive a wide range of headphones.
Features & Details
- Customised HybridDigital UcD Amplifier with Stereo and Bridge Modes
- 2 x 80 Watts per channel of Continuous Power (8 and 4 Ohms)
- 2 x 120 Watts per channel of Dynamic Power (4 Ohms)
- Bridgeable for up to 300 Watts per channel of Continuous Power
- Industry-leading ESS SABRE® PRO 32-bit/384kHz DAC
- Dual MDC 2 Ports for Future Upgrades and Expanded Features
- MM Phono Stage with Accurate RIAA Equalization and Ultra-Low Noise
- Built-in Separate Headphone Amplifier for Low and High Impedance
- HDMI eARC, Optical Digital and Coax Digital Inputs
- Dual Subwoofer Outputs
Preliminary Specifications
LINE INPUT, PRE-OUT (ANALOG BYPASS ON)
- THD (20Hz – 20kHz)
- <0.002 % at 2 V out
- Signal-to-Noise Ratio
- >106dB (IHF; A-weighted, ref. 500 mV out, unity gain)
- Channel separation
- >100dB (1 kHz); >90 dB (10 kHz)
- Input Impedance (R and C)
- 56 kohms + 100 pF
- Maximum input signal
- >4.6 Vrms (ref. 0.1 % THD)
- Output impedance
- Source Z + 320 ohms
- Input sensitivity
- 65mV (ref. 500 mV out, Volume maximum)
- Frequency response
- ±0.3 dB (20 Hz – 20 kHz)
- Maximum voltage output -IHF load
- >>5 V (ref. 0.1 % THD)
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON)
- THD (20Hz – 20kHz)
- <0.01% at 2 V out
- Signal-to-Noise Ratio
- >84dB (200 ohms source; A-weighted, ref. 500 mV out)
- Input sensitivity
- 46 kohms/100 pF
- Frequency response
- ±0.3 dB (20 Hz – 20 kHz)
- Maximum input signal at 1kHz
- >80 mVrms (ref. 0.1 % THD)
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON)
- THD (20Hz – 20kHz)
- <0.005% at 1V out
- Signal-to-Noise Ratio
- >107 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain
- Frequency response
- ±0.3 dB (20 Hz – 20 kHz)
- Channel separation
- >62 dB at 1kHz
- Output impedance
- 2.2 Ohms
LINE IN, SPEAKER OUT (ANALOG BYPASS ON)
- Continuous output power into 8 ohms and 4 ohms
- 2 x 80W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
- Continuous output power into 8 Ohms (Bridge mode)<s/trong>
- 300W (ref. 20 Hz – 20 kHz at THD 0.03%)
- THD (20 Hz – 20 kHz)
- <0.03% (250 mW to 80 W, 8 ohms and 4 ohms)
- IHF dynamic power
- 120W into 8 ohms
- 200W into 4 ohms
- 250W into 2 ohms
- Peak output current
- >26A (in 1 ohm, 1ms)
- Damping factor
- >150 (ref. 8 ohms, 20Hz to 6.5kHz)
- Frequency response
- >±0.3 dB (20 Hz – 20 kHz)
- Channel separation
- >90dB (1 kHz)
- >75dB (10 kHz)
- Input sensitivity (for 80 W in 8 ohms)
- Line In: 201 mV, Digital In: 10.25% FS
GENERAL SPECIFICATIONS
- Supports bit rate/sample rate
- up to 32 bit/384 kHz
- Frequency band
- 2.402GHz- 2.480GHz
- Maximum transmit power (dBm)
- 7 dBm ± 2 dBm
DIMENSIONS AND WEIGHT
- Gross dimensions (W x H x D)
- 435 x 100 x 390mm (17.1 x 3.9 x 15.4“)
- Net Weight
- 8.7kg (19.1lb)
- Shipping weight
- ~11kg (24.2lb)