Gedore 3269396 Adjustable Spreader Toolkit with Wedges 1, 2, 4, 5 - KL-0104-21 KBGedore 3269396 Adjustable Spreader Toolkit with Wedges 1, 2, 4, 5 GD KL 0104 21 KB In order to be able to pull stuck shock absorber units out of the steering knuckle clamping bore or suspension joints out of the lower suspension joint mounting without damage, it is absolutely necessary to widen the clamping bore properly with an expanding tool. The expansion tool set enables both the suspension strut clamping bore and the lower suspension joint mount

Gedore 3269396 Adjustable Spreader Toolkit with Wedges 1, 2, 4, 5 - GD KL-0104-21 KB

In order to be able to pull stuck shock absorber units out of the steering knuckle clamping bore or suspension joints out of the lower suspension joint mounting without damage, it is absolutely necessary to widen the clamping bore properly with an expanding tool. The expansion tool set enables both the suspension strut clamping bore and the lower suspension joint mount on the front axle to be expanded professionally. Required, for example, when changing the spring, the shock absorber and the suspension joint. The floating bolts prevent the expansion tool from tilting, and the special expansion wedge with stop prevents the clamping bore from expanding too much. This prevents damage to the cast or aluminum steering knuckle housing or other chassis components due to unprofessional removal and installation attempts. Due to the variably adjustable spreading head, even vehicles where the clamping slot is offset off-center pose no problem.

Features:

• Suitable for suspension strut clamping bores and suspension joint mounts
• Enables the professional expansion of the suspension strut clamping bore or the lower support joint receiver
• In order to be able to pull out stuck shock absorber units or support joints without damage
• Advantages - For clamping bore gap of 2 - 16 mm
• No jamming of the expanding tool
• No excessive widening of the clamping bore thanks to expansion wedges with stop
• No damage to the cast or aluminum steering knuckle housing
• Off-center clamping slots are no problem
• Fits spring strut clamping holes on e.g. Audi A3 (8P, 8V), Audi TT (8S), VW Arteon (3H), Crafter, Golf IV (1J), Golf V (1K), Golf VI (1K), Golf VII (AU), Passat (3C, 362, 365), T5 (7H, 7J), T6 (7H, 7J), BMW 2er (F45), Citroen, Fiat Panda (312), Ford Tourneo Connect, Galaxy (CK), Kia Sportage, Mercedes GLA (X156), Vito, V-Class, Nissan Qashqai (J10, 2006-2013), Seat, Skoda Kodiaq, Renault Clio (IV), Kadjar (2015-2018), Megane (IV), Peugeot, Jeep, Volvo V70, jap. vehicles etc.
• Also fits the lower support joint on the front axle, e.g. Audi A4 (8K), A5 (8T, 8F), A6 (4G), A7 (4G), A8 (4H), Q5 (8R), etc.

Specifications:

• Suitability: Universal, VW, Audi, Seat, Skoda, BMW, Mercedes, Ford, Fiat, Renault, Peugeot, Volvo
• Depth: 188mm
• Expanding Dimension: A=5.5mm, B=12mm (Keil 1), A=2mm, B=8mm (Keil 2), A=5.5mm, B=9.5mm (Keil 4), A=12.5mm, B=17mm (Keil 5)
• Height: 74mm
• Storage: Case
• Weight: 3.86 lbs
• Width: 238mm
• Country of Origin: Germany

Scope of Delivery:

1 x KL-0104-2100 A - Basic tool, 1 x KL-0104-2121 A - Thrust screw with wedge no. 1 (a=5.5mm, b=12.0mm), 1 x KL-0104-2122 A - Thrust screw with wedge no. 2 (a=2.0mm, b=8.0mm), 1 x KL-0104-2124 - Thrust screw with wedge no. 4 (a=5.5 mm, b=9.5mm), 1 x KL-0104-2125 - Thrust screw with wedge no. 5 (a=12.5 mm, b=17.0 mm), 1 x KL-0104-2141 - Bolts with thread M10, 1 x KL-0104-2190 - Plastic case with insert