SKU: 44839263392

2x VRS Industrial Shelving - 1800mm High - 200/280kg - Blue

$86.39 $95.99
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $24.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 6 - Aug 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2x VRS Industrial Shelving - 1800mm High - 200/280kg - BlueKey Features of this VRS Industrial Shelving Safely store all of your items, even the heavy ones! Some levels can hold up to 200kg 280kg, evenly distributed 5 year manufacturer's guarantee Ready to use in minutes thanks to quick and easy, boltless snap in assembly Movable support beams so you can configure the shelf supports to match any load Double up and take away shelf supports to suit your individual requirements Built to last, these units are

Key Features of this VRS Industrial Shelving


  • Safely store all of your items, even the heavy ones! Some levels can hold up to 200kg / 280kg, evenly distributed
  • 5 year manufacturer's guarantee
  • Ready to use in minutes thanks to quick and easy, boltless ‘snap in’ assembly
  • Movable support beams so you can configure the shelf supports to match any load
  • Double up and take away shelf supports to suit your individual requirements
  • Built to last, these units are engineered to ISO9001 & ISO14001 standards with 6.5mm MDF boards and a thick rust resistant coating
  • 5 adjustable levels to maximise storage space, finished in a stylish grey
  • Two part uprights allow you to build one unit as 2 half height, 900mm units
  • Supplied flat packed, easy to transport and move around before assembling
  • Available in sizes to suit your space. Choose from 300, 450 or 600mm deep units
  • Maximise stability by fixing to the wall, drill holes are located every 15cm


Ideal Uses:


  • Garages
  • Sheds
  • Stockrooms
  • Light industrial units
  • Utility rooms


Product Overview


Finally, enjoy an organised and accessible garage or stockroom! These sturdy metal garage shelving units offer a quick and easy way to clean up and organise your storage space. Thanks to the smart boltless assembly system, they’ll be ready to use in minutes.

Arguably the most versatile shelving system on the market, Storalex garage shelving units feature movable support beams. Simply slide the support beam along to suit the load! You also can also ‘double up’ support beams where necessary, adding extra support to shelves with heavy loads and remove unnecessary support beams for shelves with light loads. Individual levels can be configured to a height to suit your items, adjustable every 35mm.

Join the many thousands of home owners this Storalex garage shelving system to protect and store items within their home, office or warehouse.

Using the latest manufacturing technology, this storage system is precision engineered and rigorously tested by Storalex in Europe. Storalex differs from other shelving units on the market due to their strength and high quality construction. The sturdy frame is made from European steel coated in a thick, rust resistant powder coating. The MDF boards last longer than cheaper chipboard alternatives and the subtle and stylish graphite grey colour looks great in any garage, stockroom or warehouse.

Please note:

If the MDF is used in a damp or humid environment we recommend treating it with high-quality wood varnish or sealant.

We do not recommend storing gym weights on these shelving units.

Product Spec

Industrial Shelving Dimensions Guide

Industrial Shelving Dimensions

Size 300mm Unit Dimensions 450mm Unit Dimensions 600mm Unit Dimensions
Inches 71in High x 35½ Wide x 11 3/16 in Deep 5ft 11" High x 2.95ft Wide x 1.47ft Deep 71in High x 35.5in Wide x 23.6in Deep
Feet 5ft 11" High x 2ft 11½" Wide x 0.98ft Deep 5ft 11" High x 2.95ft Wide x 1.47ft Deep 5ft 11" High x 2.95ft" Wide x 1.96ft Deep
Meters 1.8m High x 0.9m Wide x 0.30m Deep 1.8m High x 0.9m Wide x 0.45m Deep 1.8m High x 0.9m Wide x 0.60m Deep
Centimeters 180cm High x 90cm Wide x 30cm Deep 180cm High x 90cm Wide x 45cm Deep 180cm High x 90cm Wide x 60cm Deep

Instructions
PRODUCT CATEGORY PRODUCT DESCRIPTION DOWNLOAD LINK VIDEO LINK
Industrial Shelving & Racking Assembly Instructions - Storalex VRS Industrial Shelving - 900mm wide DOWNLOAD WATCH VIDEO
Industrial Shelving & Racking Assembly Instructions - Storalex VRS Industrial Shelving - 1200 / 1500 / 1800mm wide DOWNLOAD WATCH VIDEO


Delivery & Returns

[Description 2]

Key Features:

  • Choose between 200kg or 280kg load capacity per level
  • Available in 2, 3 or 4 unit deals.
  • 5 levels adjustable in height to help maximise your storage space
  • Quick & easy boltless assembly
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 44839263392

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 11 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
BillV
San Leandro, US
★★★★★ 5
As advertised
Size: 32mm
Perfect for what I wanted it for
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2024
R
Verified Purchase
Ryan
Belleville, US
★★★★★ 5
Works great, do the double drain for best results
My 06 Altima (185k miles) had been burning massive amounts of oil (like 4 quarts every 800 miles) due to a leaking PCV valve hose that took forever for me to narrow down (months). So after getting that under control I figured I needed to decontaminate the poor engine. When using this I idled my car to operating temp (about 8 minutes). Poured the bottle in, idled it for another 15 minutes. Drained the oil (black and thick). Put the plug back in, poured about 2.5qts of new oil in. Idled it for 10 minutes. Drained that (black but much thinner). Took the old filter off. Let both areas drain for 10 minutes. Put the plug back in, put the new filter on and filled with the 4.6qts of new oil my car calls for. Ran for a few minutes (like 2 with a few revs) and then let sit for 10 mins before checking the level. When I checked my dipstick it was so clean I thought I had a leak because I couldn't see it on any of the crosshatch. I ended up having to go by touch to get the reading. This stuff is amazing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
T
Verified Purchase
T. Lee
Waukegan, US
★★★★★ 5
Worked for me! Definitely recommend!
Used a whole can in my 2009 Civic 1.8L with 150k miles. I can honestly say, this helped remove a lot of sludge out of the engine. The oil came out with a water-like texture and super dark! Before taking out the oil filter, I added new lower cost oil to the engine and let the engine run for about 5 minutes to get that extra flush! You can definitely see all the extra sludge in the new oil! Drained and refilled with new oil and filter. The engine definitely sounded quieter and smoother than before! If you value your car, I would definitely recommend doing this flush on your higher mileage cars every 50k miles or so! Definitely recommend this LiquiMoly product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2025
J
Verified Purchase
JJ
Fort Morgan, US
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
J
Verified Purchase
J N Brown
San Leandro, US
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024

recommand products

Collier pendentif ajustable Positano - vert
55.00
Dinan High Flow Middle Exhaust (X Pipe) - BMW / G87 / M2
465.00
Collier ajustable Precious - violet
122.50
Boucles d’oreilles longues dormeuses Soleil - vertes
82.50
Bracelet chaîne souple Porte-bonheur - rouge
117.50