Tycon Systems 24/48V PoE/Solar 10A Dual Input 24V Battery Charge Control [TP-SCPOE-2448-HP]

Tycon Systems 24/48V PoE/Solar 10A Dual Input 24V Battery Charge Control [TP-SCPOE-2448-HP]The solar input can handle up to 8A. The POE input up to 2. 6A. They have a built in POE inserter that delivers 48V 0. 625A at the POE out port. They also have a secondary wire terminal 24V 1. 5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the

The solar input can handle up to 8A. The POE input up to 2.6A. They have a built in POE inserter that delivers 48V 0.625A at the POE out port. They also have a secondary wire terminal 24V 1.5A output. They have full electronic protections for short circuit, reverse current, overvoltage, overcharge and over discharge. The built-in overdischarge protection and low self consumption ensures the battery is not overdischarged, which greatly increases the life of the batteries. They have five LED indicators to give a quick visual status if current is being supplied by a POE source or solar panel, if battery is charging, If load output is turned on and a warning if battery is connected with reverse polarity. Solar and Battery Connections are via 4 wire terminals for wire size up to 10AWG. POE Input and Output is via 2 RJ45 shielded connectors. The controllers are externally fused with a standard replaceable fuse. Size: 159 x 118 x 40mm (6.3 x 4.6 x 1.6”) Weight: 312 g (11 oz ) Tycon Power Systems POE/Solar charge controllers have dual inputs to charge batteries from a POE source and also a secondary source like solar panels in order to provide redundancy and insure 100% uptime for critical applications. TP-SCPOE-2448-HP Data Sheet Tycon Systems Learning Center Presentation