SKU: 21228897719

Actisense NMEA 0183 to NMEA 2000 WiFi Gateway With ISO Interface

$145.35 $161.50
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $40.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 23 - Aug 28

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Actisense NMEA 0183 to NMEA 2000 WiFi Gateway With ISO InterfaceOPTO isolated input and ISO Drive output for safely interfacing with NMEA 0183 or RS232 RS422. Up to 230 400 baud rate data transfer rate. Integrated 0. 75m ISO cable. Advanced configuration using Actisense Toolkit allows Tx Rx lists and Tx rates to be set. Supports fast heading at 10Hz. Actisense i network health checker provides valuable feedback on status of NMEA 2000 network. Supports both TCP and UDP data streaming over Wi Fi. Wide range of

  • OPTO-isolated input and ISO-Drive output for safely interfacing with NMEA 0183 or RS232 / RS422.
  • Up to 230 400 baud rate data transfer rate. Integrated 0.75m ISO cable.
  • Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set.
  • Supports fast-heading at 10Hz.
  • Actisense-i network health checker provides valuable feedback on status of NMEA 2000 network.
  • Supports both TCP and UDP data streaming over Wi-Fi.
  • Wide range of support for various mobile apps.
  • Remote Firmware upgradability ensures the device is future proof.
  • IP67 rugged case.
  • Vital NMEA 2000 diagnostic tool.
  • Diagnostic LED's on both input and output

The WGX-1 is an intelligent gateway that can route and convert data bi-directionally between its NMEA 2000 and ISO (hard wired serial) ports as well as stream this data over Wi-Fi. NMEA 2000 data can be converted to a number of useful formats including NMEA 0183 N2K ASCII and N2K Actisense (proprietary formats) and NGT Actisense (compatible with our NGT/NGX products). Converting NMEA 0183 data to NMEA 2000 (and vice versa) allows sharing of information between devices from the two standards.

This creates the possibility of upgrading some of the vessel's electronics to NMEA 2000 and keeping the remaining NMEA 0183 devices. This can help spread the cost of transitioning to NMEA 2000 reducing the initial upgrade cost to accommodate a new NMEA 2000 device. This also allows a wide variety of vessel data (e.g. position speed course wind speed depth engine data AIS messages etc.) to be shared with NMEA 0183 compatible software applications running on connected devices.

The Actisense WGX-1 also makes it possible to send and receive NMEA 2000 data safely between a PC and an NMEA 2000 network. This allows the use of PC software applications replacing or complementing dedicated hardware such as Multifunction Displays (MFD) and Chart Plotters.

Acting as an NMEA 2000 to PC Gateway allows the device to act as a rule enforcing firewall between the PC and the network giving the user full control over what data is passed and blocked. The WGX is capable of transferring every currently available NMEA 2000 PGN from the network to a PC application. Advanced filtering allows precise control of data.

The WGX-1 wireless connectivity enables data transfer from the WGX to any device (e.g. laptop tablet or smartphone) connected to it via Wi-Fi. The ISO port provides OPTO Isolation on the input and ground breaking ISO-DriveTM technology on the output to keep your devices safe from hazardous ground loops.

Thanks to the device being low power it is powered directly from the NMEA 2000 network removing the requirement for an independent power supply. The WGX-1 has the legendary Actisense "Reliability Built In" along with useful diagnostic LEDs internal antenna enhanced password security full certification and all packaged in an extremely rugged IP67 case.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 21228897719

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
KKP
Fort Morgan, US
★★★★★ 5
Everything fits perfectly and installs just like the original parts
Color: Saros 10R/Qrevo CurvX Accessories Kit
it exceeded my expectations. If you own one of these models, this kit is a smart and cost-effective way to keep your vacuum running at peak performance. The value is excellent. Everything fits perfectly and installs just like the original parts. I didn’t notice any compatibility issues, and the vacuum recognized and performed with the parts flawlessly. The main brushes are sturdy and pick up debris efficiently, while the side brushes sweep edges and corners just as effectively as the OEM versions. The HEPA filters do a great job capturing fine dust, which is especially noticeable if you’re sensitive to allergens. The mop pads are absorbent and hold up well after multiple washes. I also appreciate having extra dust bags on hand. it makes routine maintenance simple and stress-free. The included cleaning tool is a thoughtful addition that helps remove hair buildup quickly. Overall, this kit delivers quality, quantity, and convenience in one package. It’s an excellent investment for maintaining your Roborock and extending its lifespan. Highly recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 26, 2026
A
All Smiles
Fort Morgan, US
★★★★★ 5
Fit My Roborock Saros 10R Perfectly
Color: Saros 10R/Qrevo CurvX Accessories Kit
I got a Roborock Saros 10R for Christmas and purchased this accessory kit to have on hand when they are needed. I have an older model Roborock and you never know when something might need to be replaced. Since the accessories for my older Roborock do not fit my new 10R I wanted to ensure that I have dust bags on hand and don’t lose precious vacuum time waiting for delivery. After shopping around I decided that this set, for the price, made the most sense for me. Not only do I get the dust bags, but I also get replacement mop pads, main brushes, side bushes, filters and tools so when it’s time to replace those items, I’m ready. Although I don’t have a need to replace all of the parts just yet, I did check each of them to make sure that they fit and that the quality appears to be adequate. Everything fit well, and looks to be a reasonable replacement. There was some slight quality differences, however, there’s nothing that is concerning, and the quality difference is so slight that it’s barely noticeable. Considering the price difference from the name brand this accessory set is an excellent bargain!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 16, 2026
D
DeeDee
Lexington, US
★★★★★ 2
Does not have everything shown
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
This kit does not have all the items shown. There are only 4 bags, not 6 as shown. There is only 1 red and 1 black roller, not 2 as shown. There is a screwdriver included but no directions. There is no odor to it and the items look durable but I have no idea how to replace the rollers and spinny things since there are no instructions. The bags fit my robot vacuum ok and are durable. There needs to be directions included as well as everything shown. Otherwise, you aren't getting your money's worth.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 14, 2026
S
Steve
Whiting, US
★★★★★ 4
Solid Kit That Saves You Some Money
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
I ordered this accessories kit for my Roborock Saros 10R mostly because I didn’t feel like spending a ton just to keep up with teh normal maintenance. After using it for a bit, I can say it’s been doing exactly what I hoped it would. First thing you notice is the cost of course, keeping these robot vacuums running can add up fast, and this kit really helps take the sting out of replacing the usual wear parts. Most of the pieces line up with the Saros 10R really well. Everything went in without a fight and once installed, it all works the way it should. Brushes rotate fine, filters sit where they’re supposed to, and nothing feels janky or poorly sized. Quality wise, it’s pretty close to the name brand stuff. You can tell there’s a small difference if you really look for it on some parts. Some of the plastic feels a bit lighter and a couple items don’t have that same premium feel. But in use, I’m not seeing much of a difference, cleaning performance is still strong and the vacuum hasn’t skipped a beat. Durability is the one thing you can’t fully judge right away. So far though, everything seems to be holding up nicely. No fraying, cracking, or early wear, so I’m cautiously optimistic they’ll last about as long as the originls. Overall, this kit is a good deal for the money. It does what it’s suposed to, saves you some cash, and keeps the Saros 10R running smoothly. Not perfect, but definitely worth it. Four stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 10, 2026
J
J. Lam
Whiting, US
★★★★★ 4
most can fit saros 10, but not all
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
I should have done a little more research with these. I purchased this for a Saros 10, i thought the Saros 10 and 10R was basically the same besides the filters. I was wrong. Although the brushes are the same size, they didnt fit. They lacked a special metal piece on one side, and the 10R has a different shape on the other, cant even jerry rig it to fit. The filters didnt fit my Saros 10, but that didnt cause the dropped rating, but they quality of it looks very good, and seems well made. The side brushes are good and they fit my Saros 10, replaced them and didnt have a problem. The bags also fit and they are very good. The mopping brushes did not fit, but it was very well made and definitely wasnt just a cheap set. The brush and screw driver were just to add additional number counts and basically useless.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026

recommand products

Plutus Wild Emerald Figleaf In Green Luxury Throw Pillow - Double Sided 20 X 26 Standard
316.26
Plutus Wild Emerald Figleaf In Green Luxury Throw Pillow - Double Sided 26 X 26
338.04
TOPSTAR ERGONOMIC KIDS CANVAS SHOES (SKU 2035)
547.50
Spitfire Eternal Adjustable Snapback - Black
22.00
Plutus Enigma Twist Luxury Throw Pillow In Blue, Beige Colors - Double Sided 12 X 25
127.27