Pay in installments of $10.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 31 - Aug 5
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Starlink Mini Antenna Suction Cup Mount for Sunroofs & Windows | Road Trip Tested | Compatible with Model YEnhance Your Starlink Mini Setup with Our Suction Cup Mount! Take your Starlink Mini on the road with confidence using our custom designed suction cup mount. Perfect for securely attaching your dish to most sunroofs or rear windscreens, this mount is ideal for road trips or mobile setups, keeping you connected wherever you go. Product Highlights: Road Tested Durability: Inspired by a successful road trip from Detroit in a Tesla Model Y, this mount has
Enhance Your Starlink Mini Setup with Our Suction Cup Mount!
Take your Starlink Mini on the road with confidence using our custom-designed suction cup mount. Perfect for securely attaching your dish to most sunroofs or rear windscreens, this mount is ideal for road trips or mobile setups, keeping you connected wherever you go.
Product Highlights:
-
Road-Tested Durability: Inspired by a successful road trip from Detroit in a Tesla Model Y, this mount has proven to withstand rough roads and intense heat. Made from heat and UV-resistant materials, it's built to last through the toughest conditions.
-
Reliable Performance: Stay connected even in areas with spotty service. This mount provides stable internet access with speeds up to 175 Mbps, ensuring you’re always online during your travels.
-
Versatile Compatibility: Designed specifically for the Starlink Mini, this mount securely attaches to most sunroofs or rear windscreens using four strong suction cups. It’s perfect for cars, RVs, and even windows at home.
-
Easy Installation: No tools are required! Simply attach the suction cups, place your Starlink Mini in the mount, and you’re ready to go. Quick and hassle-free installation for both short and long journeys.
What's Included:
- 1 x Mounting Bracket Set
- 4 x High-Strength Suction Cups
Please Note: The Starlink Mini Antenna is not included. The photos are for display purposes only. This listing includes the mounting bracket and suction cups.
Important Notice:
Please use the mount with caution. While the suction cups provide a strong hold, always ensure they are securely attached before use. The seller assumes no responsibility for damage or injury if the mount detaches during use. Always double-check the mount’s stability before driving or leaving the dish unattended.
Installation Guide for Starlink Mini Suction Cup Mount (For Sunroofs and Rear Windscreens)
What You’ll Need:
- Starlink Mini Suction Cup Mount (Parts A and B)
- Starlink Mini Dish
- Clean cloth or paper towel
- Rubbing alcohol or glass cleaner
- Optional: Water, Vaseline, or ChapStick for suction cups
Step 1: Preparing the Surface
- Choose Your Surface: Decide whether you’ll be attaching the mount to the sunroof or rear windscreen.
- Clean the Surface: Use rubbing alcohol or glass cleaner to wipe down the surface, ensuring no dirt or grease interferes with the suction.
- Clean the Suction Cups: Make sure the suction cups are free from dust or debris.
Step 2: Assembling the Mount
- Attach Part A to the Kickstand: Align the two screw holes on Part A with the holes on the kickstand of your Starlink Mini. Secure them together using the included screws and nuts.
- Insert the Kickstand into the Antenna: Once Part A is attached to the kickstand, insert the kickstand into the Starlink Mini antenna as you normally would.
Step 3: Connecting Part B
- Slide the Antenna into Part B: Align the notches on Part B with the antenna and gently slide it into place until it’s securely connected.
Step 4: Attaching the Suction Cups
- Position the Suction Cups: Firmly press the four suction cups onto the cleaned surface (sunroof or rear windscreen) to ensure a strong hold.
- Lock the Suction Cups: Once in place, press firmly in the center of each suction cup and snap the clamps closed for maximum suction strength.
Step 5: Test the Mount
- Check Stability: Gently shake the dish to ensure all components are securely fastened and the suction cups are holding tight. If any suction cups feel loose, reapply them.
- Test Drive: Drive slowly at first to test the mount’s stability. If everything holds, you’re ready for your trip!
Pro Tips:
- Reapply as Needed: If the mount shifts during a trip, stop and re-secure the suction cups.
- Check Suction Regularly: For long journeys, check the suction cups periodically to make sure they’re still secure.
- Mind Extreme Temperatures: Extremely high or low temperatures can affect suction, so be mindful of where you park or drive.
Troubleshooting:
- Suction Won’t Stick: Clean both the glass and suction cups thoroughly. Use water or Vaseline for better suction.
- Dish Wobbling: Make sure the screws and nuts on Part A are tight and that the suction cups are fully locked.
- Suction Failing: Consider replacing worn-out suction cups if the grip weakens over time.
If you need any help or have questions, feel free to reach out to us! We're here to make sure your Starlink Mini Suction Cup Mount works perfectly.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 19 reviews
Sort
Product Reviews
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Works For Desired Use
Color: Black, Size: 4 Panel-136‘’W-Round Pad
I recently purchased the Room Divider 6FT Folding Privacy Screens, 4 Panel Partition Room Dividers, and I must say, it has transformed the way I use my living space. The four-panel design is both elegant and functional, providing instant privacy without feeling bulky or overwhelming in my room.
Setting it up was a breeze; the folding mechanism is smooth, allowing me to adjust the configuration as needed—straight, angled, or zigzag. I particularly appreciate the sturdy build; the panels feel solid yet lightweight, making it easy to move around when I want to reconfigure my space.
Aesthetically, it’s a great addition. The neutral finish blends well with my décor, and the simple design doesn’t draw too much attention while still offering a sense of separation. It’s perfect for creating a temporary office corner, dividing a studio apartment, or even using it as a backdrop for online meetings.
If I had to point out a minor downside, it would be that the divider isn’t completely soundproof—so conversations can still carry through—but for visual privacy and space management, it’s excellent. Overall, I’m extremely satisfied and would recommend it to anyone looking for a versatile and stylish room divider.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
★★★★★ 5
True to size & Use a Drill
Color: Beige, Size: 3 Panel-102‘’-Round Pad, Color: Beige, Size: 3 Panel-102‘’-Round Pad
Love this! Works perfectly for where I wanted it. I did measure my room incorrectly and thought it would be smaller, thankfully it’s not and thankfully it’s not bigger than the room itself. I did like how the whole thing was move-able but it was a bit annoying so I just added extra clips to the left of the middle one and unscrewed the right of the middle at the bottom so it opens like a door, this did make it a bit flimsy but duck taping it to the wall as anchor it works.
100% recommend, but do suggest a drill and a second set of hands to put it together, due to its size it can be a bit difficult to maneuver putting together yourself.
Also if you have a clingy cat like I do, and think this will help keep them out, no, my cat who is very large can manage to squeeze underneath it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 9, 2024
recommand products
Fishbone Offroad 2018+ Jeep Wrangler JL 2/4 Door - Black Quarter Panel Chip Guards
35.00
BES-MB314 3" Mega-Magnetic Bit Holder 1/4" hex shank
10.17
Platinum Tools 18312 F RG11 Compression Connector Nickel Plate 4pc Clamshell
16.17
Cometic Ford 302/351W Windsor V8 .027in MLS Cylinder Head Gasket - 4.155in Bore - SVO
117.00
Fishbone Offroad 2018+ Jeep Wrangler JL / 2020+ Gladiator JT Foot Peg Set - Black
72.00