Coffee Machine Water Filters with Activated Carbon Filter - For Philips Saeco AquaClean CA6903 and More - 2 Pack

Coffee Machine Water Filters with Activated Carbon Filter - For Philips Saeco AquaClean CA6903 and More - 2 PackCA6903 Compatible Coffee Machine Water Filter Key Features Ion Exchange Technology: Effectively removes calcium and magnesium ions from the water to prevent limescale accumulation within the boiler and internal tubing. Activated Carbon Filtration: High density carbon core absorbs chlorine, pesticides, and heavy metals, ensuring a neutral water profile that highlights the natural coffee aroma. Micro Porous Filter Screen: Features an ultra fine mesh to

CA6903 Compatible Coffee Machine Water Filter

Key Features

• Ion-Exchange Technology: Effectively removes calcium and magnesium ions from the water to prevent limescale accumulation within the boiler and internal tubing.
• Activated Carbon Filtration: High-density carbon core absorbs chlorine, pesticides, and heavy metals, ensuring a neutral water profile that highlights the natural coffee aroma.
• Micro-Porous Filter Screen: Features an ultra-fine mesh to block micro-particles and sediment from entering the brewing unit, preventing internal blockages.
• Patented Water Path: Designed with a specific internal flow path that ensures water stays in contact with the filter media longer for maximum purification.
• Plug-and-Go Compatibility: Features the specialized click-fit interface for a secure, tool-free installation into the water reservoir.

Replaces / Cross-Reference Part Numbers

• Philips Saeco AquaClean CA6903
• CA6903/10
• CA6903/22
• CA6903/00
• CA6903/47
• AquaClean Filter System

Compatibility & Fitment

This filter is compatible with all Philips and Saeco espresso machines equipped with the "AquaClean" technology logo on the water tank, including:

• Philips 1200, 2200, 3200, 4300, and 5400 Series: EP1220, EP2220, EP3241, EP3246, EP4347, EP5447.
• Saeco PicoBaristo: HD8924, HD8927, SM3061, SM5460, SM5473.
• Saeco Incanto: HD8911, HD8914, HD8917, HD8919, HD8921, HD8922.
• Saeco Xelsis: SM7580, SM7581, SM7680, SM7683, SM7685.
• Other Series: Saeco Intelia Deluxe, Exprelia EVO, GranBaristo, and GranAroma models.

When to Replace

• Automatic Alert: The machine's display will indicate "Replace Filter" or the AquaClean status light will flash.
• Capacity Limit: After filtering approximately 95 liters (25 gallons) of water.
• Time Interval: Every 3 months to ensure hygiene and prevent bacterial growth in the filter housing.
• De-calcification Reset: If the machine has been used without a filter and requires a manual descaling cycle, a new filter should be installed immediately afterward.
• Note: By replacing the filter 8 times consecutively as prompted by the machine, you can typically delay the need for a full descaling for up to 5,000 cups.

Installation Tips

• Air Bubble Removal: Shake the filter for about 5 seconds, then immerse it upside down in a container of cold water until no more air bubbles emerge.
• Insertion: Push the filter vertically onto the filter connection in the water tank until it is securely seated.
• Activation: Use the machine's "Filter" or "AquaClean" menu to activate the new filter. The machine will flush a small amount of water through the steam wand or dispenser.
• Water Quality Check: Ensure your machine's water hardness setting is programmed correctly to allow the system to accurately track the filter’s lifespan.
• Post-Installation: If you notice black carbon particles in the first flush, this is normal; simply run another "Hot Water" cycle to clear the remaining fine dust.