SKU: 13275827325

EBC S13 Kits Yellowstuff Pads & RK Rotors (Front) (NLA)

Sale price$225.45 Regular price$250.50
Save 10%

Pay in installments of $62.62 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 16 - Jul 21

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

EBC S13 Kits Yellowstuff Pads & RK Rotors (Front) (NLA)Yellow Stuff Brake pads are capable of high temperature use with very good wear life perfect for all track use. This new formulation sets a new trend in race type brake pad compounds. Give your car championship stopping power with EBC Yellow Stuff Brake Pads EBC's highest gripping pads formulated for All Track Use as well as performance street use Whisper quiet operation the beveled edges and center line slot of your EBC Yellow Stuff Brake Pads defend

Yellow Stuff Brake pads are capable of high temperature use with very good wear life - perfect for all track use. This new formulation sets a new trend in race type brake pad compounds.

  • Give your car championship stopping power with EBC Yellow Stuff Brake Pads
  • EBC's highest gripping pads - formulated for All Track Use as well as performance street use
  • Whisper-quiet operation - the beveled edges and center-line slot of your EBC Yellow Stuff Brake Pads defend against squeals
  • Treated with EBCs unique Break-In surface coating for rapid bedding and strong braking power fresh from the box
  • The pads and the pad plates are powder coated for a lifetime of rust-free service
  • EBC Yellow Stuff Brake Pads center-line slot vents heat and gas to prevent thermal cracks and fade
  • EBC backs your Yellow Stuff Brake Pads with a 12-month/10,000 mile warranty

The bite from cold is superb which is uncommon with race materials (normally requiring warm-up) and makes this a pad which can be safely used on the highway as well as on the race track. This new formulation was used by numerous championship race and rally drivers since 2004 and is truly a milestone in brake pad material development.

Your EBC Yellow Stuff Brake Pads are backed with a 12-Month/10,000-Mile Warranty.

EBC RK Series Premium OE Replacement Plain Brake Rotors by EBC®. Sold In Pairs. This replacement brake rotor is sized and shaped to OE factory dimensions with the strictest quality controls and machined to be within extremely tight tolerances of less than 0.05 millimeters. High quality "gray" iron meets or exceeds factory original specifications regarding thermal buildup, brake noise, vibration, and wear. The anodized layer is designed to disappear in the area that the brake pads contact the rotor.

Features:

  • Sized and shaped to original equipment specifications with extremely tight tolerances
  • Designed to meet or reduce factory levels of heat buildup, brake noise, vibration, and wear
  • Recommended by EBC for use with EBC Ultimax and Yellowstuff pads
  • Black GEOMET™ and NITROTHERM™ anti-corrosive finish
  • Recommended by EBC for normal street driving, high-performance street driving, truck or SUV use, drifting, and short track runs
  • High quality "gray" iron features a higher carbon content to reduce brake shudder, heat cracking, and high-frequency vibrations which cause squealing
  • EBC recommends a 500-mile break-in period with lighter braking application

Benefits:

  • Perfect for non-aggressive driving
  • Ensure quiet operation
  • Offers low dust and long pad life
  • More resistant to warping or cracking
Why pay dealership prices that are marked up 100% when you can purchase EBC high-quality Premium OE Replacement Rotors for less? Unlike cheaper, inferior replacement rotor that may look identical to original equipment, EBC builds these to match original factory dimensions and machines them to extremely tight tolerances. But they did not stop there. EBC has applied their engineering expertise to create an iron compound that exceeds the quality of most original material blends, so these rotor actually improve on factory levels of heat buildup, brake noise, vibration, and wear. A higher percentage of carbon and silicone is present which leads to the formation of graphite during the curing process. When graphite is present, the rotor itself takes on qualities of a denser, softer material. Heat is more evenly dispersed to reduce warping, cracks are less likely, and vibration-related noise is greatly reduced. Premium OE Replacement Rotors is anodized for corrosion resistance, and rotor should be fully ready for performance driving after a 500-mile break-in period.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13275827325

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 14 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
TAP
New York, US
★★★★★ 4
Anker support comes through
Update: Anker support contacted me and provided a new unit. On this one, the video works fine, both via HDMI and DisplayPort. I'm much happier now that the unit, which I do like, works properly. There is still one video-related quirk that can be annoying, though, if you often unplug the external monitor from the hub but leave the hub connected to the computer. When I unplug the external monitor from the hub, the hub doesn't tell the computer that the monitor is no longer connected (the same thing happened with the original faulty unit). Since the external monitor is my primary monitor when connected, this leads to an irritating set of steps ending up with disconnecting the hub. I reported this issue to Anker support and they forwarded it to their engineering group. Initial review: I like the form factor and the many connection options. They all work fine EXCEPT that the video (whether DisplayPort or HDMI) keeps dropping out. The computer (MacBook Pro M1 14" running MacOS 13.0.1) thinks the external monitor is there, but nothing shows on the screen for a few seconds, then it comes back on, then off again. Anker support says to try updating the firmware, but to do that requires a Windows computer with a USB-C port. I do not have access to such a machine, so I'm stuck. Since one of the primary reasons I want a hub is to handle the video, I have to return the unit. This is a real disappointment since I otherwise have been very happy with Anker products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 29, 2022
S
Verified Purchase
SeedyROM
Fort Morgan, US
★★★★★ 5
Incredible Quality, Incredible Results!!
AMAZING!! I use my Samsung Z Fold with a Maono Podcast Soundboard for podcasting. Having the phone charge from the soundboard power passthrough was inadequate to keep the phone charged, and generated "noise" in the path. I got the Anker 565 USB-C hub, and routed the power and signal through the Anker hub. WOW!! My phone remains fully charged throughout the podcast, there is ZERO "noise" in the signal, and I can actually do more than ever expected! The quality of Anker products has been proven with me Over and Over with every single product I have purchased. From high-end 240w USB-C cords, to Power Banks, Power Blocks, Bluetooth Earbuds & Headphones, across the board; I have never been disappointed! I highly recommend Anker, and specifically the Anker 565 USB-C hub!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2025
W
Verified Purchase
Wary one
Carnegie, US
★★★★★ 5
Versatile with all the ports you’re looking for.
Compact and really expands your options. I was using one of the ports on the MacBook Pro M1 for a second display and the other for an external drive and then switching back and forth with the charger. This device does all that and only uses one of the ports. Plus there are multiple USB OLD STYLE still available. No external power appears to be necessary, although since I use the Mac power supply in the dedicated power in port I’d think there’d be no issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
J
Verified Purchase
J. Almeida
Whiting, US
★★★★★ 1
Good product, I suspect, if it works. (Also Marketing Needs Improvement)
UPDATE: Nope, it's just the hub. :( It's either defective or not a good product, which is unfortunate. The stutter issue has been resolved, but I can still not use the dock to push an image to my secondary monitor (1080p). I spent several hours this evening updating drivers for my Lenovo Thinkpad E15 Gen2 (AMD) without success. FYI: This laptop DOES support PD+DP through USB-C, something I confirmed before trying to go down the USB-C route in an attempt to replace my ancient Diamond USB-A dock. An image was never sent to my second monitor, whether connected via HDMI or DP through the hub. In all cases, the monitor IS recognized by Windows, so some information is being communicated, just not an image to the monitor. During every attempt, when the monitor was first plugged in, responsiveness in Windows would stutter, lag, and generally respond slowly to my KB+M inputs until, eventually, the laptop caught up and was OK. I am highly disappointed and am considering returning both products, but the USB-C dock is definitely returning. It would be nice, but I don't need a 100W charger. My hope of replacing my current USB-A dock is diminishing at the price point I was hoping for, so we shall see if it's up to the task of the new 2K monitor I have on the way and go from there. Original: Buyer be cautioned: The Anker 565 USB-C also needs power for itself, which is evident if you think about it, but it's not stated anywhere that I could find, and it may not dawn on you until things aren't working quite right. Lack of power could cause many issues I've read about in reviews. The issue: Mouse movement would stutter every 5-10 seconds. Though Windows recognized my HDMI monitor in Device Manager/Display settings, no image was sent to it through the Anker hub. Current theory: So, the manufacturer's 65W USB-C charger for my laptop cannot FULLY power the hub with one connected HDMI monitor, two USBs, and Ethernet through the USB-C hub. I did not test the two USB devices (Keyboard and headset) as there was little need once the stuttering began, which was immediate. I have an Anker Nano 100W arriving tomorrow, and I will update the review once I've re-tested. Suggestion: My ask to Anker would be to *estimate* the power draw of their dock and list it somewhere with many warnings, etc. If they wanted to go above and beyond and add averages for peripherals and the like, that would be amazing, but if not, I would understand, as I'm sure that information could become dated fast. A power warning would have prompted me to consider the power charging situation, and I may gone with one of their docks (About a $100 increase) instead. But now that I'm annoyed, I'll purchase a 100W charger that I can use for my work laptop and elsewhere as needed. :) They are still getting my money, but not as much. They make amazing products, but small details like this matter to me as a consumer.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 26, 2024
I
Verified Purchase
icsttt
Bozeman, US
★★★★★ 5
Anker 11 in 1 Docking station as a Starter.
This is an entry level addition to a PC. If more ports needed then the 14 in 1 or a powered Hub.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 3, 2026

recommand products