Forge Charge Cooler Radiator & Expansion Tank Kit - B8/B8.5 Audi | S4 | 3.0 TFSI

Forge Charge Cooler Radiator & Expansion Tank Kit - B8/B8.5 Audi | S4 | 3.0 TFSIThis kit is highly recommended for either those in warm climates who wish to maintain performance, or specifically for tuned engines where the boost has been increased from standard on the Eaton Supercharger using software re calibration, a reduction pulley or a combination of both. To maximize the cooling efficiency we use an alloy fast thermal transfer radiator core which is 640 x 440 x 42mm. This has proven very effective in both keeping

This kit is highly recommended for either those in warm climates who wish to maintain performance, or specifically for tuned engines where the boost has been increased from standard on the Eaton Supercharger using software re-calibration, a reduction pulley or a combination of both. To maximize the cooling efficiency we use an alloy fast thermal transfer radiator core which is 640 x 440 x 42mm. This has proven very effective in both keeping chargecooler temperatures lower but also reducing the recovery times in "heat soaked" situations.

Note: This FMCCRAD1 kit is for the S4 with a single factory chargecooler and no ADS cooler.

There are four variations of chargecooler for the S4 B8 and B8.5 chassis. In order to purchase the correct one for your car, you will need to look at the current setup you have fitted from the factory; if you have one or two chargecooler radiators as standard, and if your car is fitted with ADS (Audi dynamic steering).

Please click here to review the PDF to determine which is the correct part for your car.

Founded in 1996, Forge Motorsport is a performance parts manufacturer that prides itself on the ideals of innovation, clever design, customer care, and making products of only the highest build quality.