SKU: 11384624769

Yamaha CS-01 MIDI Retrofit

Sale price$49.46 Regular price$54.95
Save 10%

Pay in installments of $13.74 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Yamaha CS-01 MIDI RetrofitThis a a modified UMR2 MIDI retrofit board specifically designed for use inside a Yamaha CS01 (I or II) without removing the speaker and requires a hole to be drilled for the TRS MIDI jack. The device has be simplified by removing connections not required for the CS01 so it CANNOT be used with other devices. It also features psiMIDI which means it can accept either 3. 5 TRS A or TRS B MIDI cable This is an DIY kit which includes: CS01 UMR2 PCB:

This a a modified UMR2 MIDI retrofit board specifically designed for use inside a Yamaha CS01 (I or II) without removing the speaker and requires a hole to be drilled for the TRS MIDI jack.  The device has be simplified by removing connections not required for the CS01 so it CANNOT be used with other devices.  It also features psiMIDI which means it can accept either 3.5 TRS A or TRS B MIDI cable

 

This is an DIY kit which includes:

  • CS01 UMR2 PCB: Complete and preprogrammed with UMR2 firmware 
  • Ribbon cable, wires, TRS MIDI Jack
  • 2m long TRS MIDI A Cable

 

 

Install Instructions:

Step 1: Ribbon cable Prep

  1. Strand out one end to 1.2 cm from where the cable is stripped
  2. Remove the insulation by gently pulling off the ends and tin the wires
  3. On the other side, simply remove the ends and tin, no stranding needed

 

Step 2: MIDI Board Prep

  1. Tin all pads with a small blob of solder on both adapter and CPU board

Step 3: CS01 board prep (CS01 II is the same)

  1. Trim the leads on the by the keyboard pads where shown
  2. Add fresh solder to the 12 pads, try to make them even in size
  3. Solder the DC+ and DC- wires where shown

 

Step 4: MIDI Board soldering

  1. Solder the ribbon cable starting with the middle 2 pins and work your way out.  The red strip is pin D0
  2. On the solder adapter board solder the other end of the ribbon (not that D0 is not marked)
  3. Remove the ground tab from the TRS jack and solder on the wires

 

Step 5: CS01 Drilling/MIDI Jack.

  1. Drill an 8mm (5/16") hole where shown.  A step drill is recommended.  THIS IS A DELICATE STEP SO EXTREME CARE SHOULD BE TAKEN
  2. Install the MIDI Jack followed by the nut from the other side.  Tighten with needle nose pliers.  Apply sticker (cut in half first)

 

Step 6: Install the MIDI board

  1. Place the adapter board on top of the keyboard pins 
  2. Solder the outermost pins to the pads below them and solder the rest.  Test with meter if needed, those points correspond to the red and black wired below
  3. Remove the backing from the tape on the back of the adapter
  4. Route the MIDI wires in the gap between the keyboard and main board
  5. Stick the MIDI board where shown running the wires under the board with a 90 bend in the ribbon
  6. Solder the MIDI wires to the marked terminals THE ORIENTATION DOES NOT MATTER
  7. Solder the DC+ and DC- wires

 

Step 7: Calibration

  1. Connect TRS MIDI to your keyboard, set the footing on the CS to 32 (IMPORTANT)
  2. Turn the power switch on.  While holding the program button down with something pointy but not sharp, plug the DC jack in.  Release the pointy thing
  3. LED will flash.  Press the F key on your MIDI keyboard on the octave you want the MIDI notes to trigger the CS-01 to start,  THE MIDI WILL ONLY TRIGGER 32 NOTES FROM THAT F NOTE.  Once the MIDI note is received, the device will pause to save and the LED will flash again
  4. Starting with the first key on the CS-01, you must play each not sequentially, after the note is received, the LED will turn red when the note is on, then green flashing again for the next note.  Repeat for all notes
  5. When complete, press program again, LED will go red then go out
  6. Unplug device, and power up again
  7. Check all MIDI note work over the 32 key range, if any notes are missing, repeat the process

 


Original Design by John Staskevich, 2017

GitHub - staskevich/UMR2: Universal MIDI retrofit PCB for matrixed-switch keyboards.

Synths/UMR2CS01 at main · MichiganSynthWorks/Synths

This derivative work is licensed under a Creative Commons Attribution 4.0 International License. http://creativecommons.org/licenses/by/4.0/

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 11384624769

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
Kye-won Ahn
Carnegie, US
★★★★★ 5
Perfect Phone Mount: Secure, Versatile, and Easy to Install!
This phone mount has truly exceeded my expectations! It’s incredibly easy to install and holds my phone securely in place, providing total peace of mind while driving. What really sets this mount apart is its impressive versatility—I've never seen anything quite like it. The base attaches firmly to the air vent, and the adjustable arm allows me to position my phone precisely where I want it, with the freedom to tilt it up, down, left, or right. Plus, it doesn’t interfere with air flow from the AC, which is a huge bonus. Although my wife's phone case isn't MagSafe-compatible, the included metal ring works seamlessly with it, and my MagSafe case connects just as smoothly. I couldn’t recommend this product more—it’s been an absolute game-changer for us! This is a personal purchase, and I’m thrilled with it. I’ll be sure to update if anything changes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 12, 2024
A
Verified Purchase
Austin T.
Carnegie, US
★★★★★ 5
Secure and great fit
I gave this product a chance and it did not disappoint! I did not need to read any instructions for installation and was able to quickly and easily figure it out. Installation takes less than 5 minutes. Just align the mount to the top corner of your tesla screen and turn the dial to adjust the tightness. Once tightness is set, just test to see if it’s really fitted by wiggling it around to check for looseness. I like the fact that I can adjust the angles of the mount easily. My phone can be angles to be on top or side of the Tesla screen. When driving, my phone does not shake one bit. When it’s time to remove my phone, just give it a quick pull to detach and that’s it. The build quality is also very nice and I like the design of it overall. I think it’s a well thought out product. Definitely would recommend to friends and family with Teslas.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 28, 2025
J
Verified Purchase
Jim Burgett
Port Orchard, US
★★★★★ 4
Good mount but…
This is a solid mount for the Tesla monitor but the mounting points on the corner of screen caused my screen protector to bubble up. I had to return it unfortunately.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 4, 2026
M
Verified Purchase
Ms. Jfuller
Battle Creek, US
★★★★★ 5
Tesla 😋😉 jeep phone mount.
Bought this to go in my jeep, perfectly attached to the corner of the screen of the screen, the only down side is since my screen raises and lowers over time with the vibration of the jeep it does make the screen slide down. But the magnet holds the phone very well as long as it is aligned properly to the back of the phone. I know it say tesla mount but my choice of smart stereo for my jeep is not a flush mount, it sticks out and has a cd player in the deck. As well the screen raises and lowers for access to to the cd player. So perfect for my jeep.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
H
Verified Purchase
Himanshu Sukheja
Phoenix, US
★★★★★ 5
Amazing MagSafe phone stand
I recently purchased this MagSafe car phone mount, and it has been a game-changer for my daily commutes. The installation was effortless—just snap it onto the air vent, and you’re good to go. What stands out the most is the strong MagSafe connection. My phone stays securely in place even on bumpy roads, and removing it is just as seamless. The minimalist design fits perfectly with my car’s interior, and it doesn’t block my view like other bulkier mounts. Another highlight is the 360-degree rotation feature, which makes adjusting the angle for navigation or hands-free calls incredibly easy. It’s sturdy, reliable, and eliminates the need for clamps or adhesives. Overall, this is a must-have for anyone who uses their phone for GPS or music while driving. Highly recommended for MagSafe-compatible phones!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2024

recommand products