Pay in installments of $505.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 19 - Aug 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2008-2008 Ram HD 8" Long Arm Conversion Kit with FOX 2.0 Performance Shocks (BDS1748FS)BDS Suspension built this long arm conversion lift kit to set your 2008 diesel Dodge Ram 2500 and 3500 up right with 8" of lift and clears up to 38" tires. It comes with everything to do the job: tubular long control arms with relocation brackets, progressive rate Pro Ride coil springs, a forged drop pitman arm and track bar bracket for steering correction up front, a rear lift block, longer u bolts out back, and a matched set of FOX 2. 0 Performance
BDS Suspension built this long arm conversion lift kit to set your 2008 diesel Dodge Ram 2500 and 3500 up right with 8" of lift and clears up to 38" tires. It comes with everything to do the job: tubular long control arms with relocation brackets, progressive-rate Pro-Ride coil springs, a forged drop pitman arm and track bar bracket for steering correction up front, a rear lift block, longer u-bolts out back, and a matched set of FOX 2.0 Performance Series shocks.
The long lower control arms reduce caster change through wheel travel for a more controlled feel on and off road, and the system keeps the factory arm triangulation for added stability.
Features
- Tubular long arms reduce caster change and create more controlled feeling on and off road
- Heavy duty control arm brackets maintain proper suspension geometry
- Front high strength progressive rate coil springs for a great ride on any terrain
- Front track bar relocation bracket to re-position axle
- Forged drop pitman arm to correct steering angles
- Front sway bar correction to maintain handling performance
- BDS NX2 gas or FOX performance series Internal Floating Piston gas shocks to improved ride and offroad performance
Specs
- Front Lift Method: Coil Spring
- Rear Lift Method: Block
- Shocks Included: Yes
- Front Lift Height: 8 inch
- Rear Lift Height: 5 inch
Notes
- Measure rear axle tube before ordering. Some 4 inch axle models with dual overloads will require UBT4068.
- Rear lift options will not fit dually applications.
- If driveline vibration occurs, order either transfer case drop. NOTE: 122606 transfer case drop kit will only replace the OE bracket 52121938AA
- Additional front driveline modification may be required.
- Exhaust modification will be required for dual rear shock kit 122009.
- 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
- If your Truck has had the steering gear box changed and the sector shaft diameter measures 1-1/2 inch-1-5/8 inch you will need to add part BDS082404 to your kit.
Includes
- BDS002508, 03-05 Dodge 3/4 ton 5in Rear Spring (UPC 658848611294)
- BDS012801, Dodge Control Arm Mounts (UPC 658848612840)
- BDS012802, Dodge Control Arm Box Kit (UPC 658848612857)
- BDS012804, 08 Dodge Ram Long Arm Box Kit (UPC 658848612871)
- BDS032801, Dodge 8in Coil spring (UPC 658848616442)
- BDS122802, 03-12 Dodge 2500 T-Case Index Kit (Man) (UPC 658848619818)
- FOX98224751, Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1
- FOX98224761, Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1
- UBT4067, 9/16 x 4 x 12-1/2 Round U-bolt (UPC 711745613003)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Comfortable chair constructed with good quality materials
Color: Dark, Color: Dark
Having purchased several chairs from Amazon over the years, I would rank the Marsail Executive Office Chair Ergonomic Desk Chair as one of the better quality options I've received. Here is a breakdown of my experience:
Build Quality & Aesthetics
I was immediately impressed by the quality of the base. It is crafted from brushed metal and has a substantial, premium feel that sets it apart from cheaper plastic alternatives. Additionally, the pneumatic height adjuster was easy to install and operates very smoothly.
Comfort & Ergonomics
-- Padding: The padding is not quite as thick as I expected, but it has proven to be very comfortable to sit in so far. Sometimes I am in the chair as much as 10 hours per day, and the foam in the seat holds it's form all day.
-- Support: The chair does not include built-in lumbar support, so I am using a lumbar pillow. However, I actually find this preferable; it allows me to adjust the pillow to my exact needs or remove it entirely depending on how I'm feeling.
-- Head support and tilt: I like to work in an upright position, but I sometimes i like to lean back for a rest. The chair leans back just enough to allow me to rest my head, but not so much that I feel like it will tip over. The head support is subtle too - it doesn't hurt my neck or force me to rest in an awkward position.
Functionality
-- The mobility of this chair is excellent. The wheels are high-quality and roll very smoothly on my hardwood floors, which is often a pain point with other office furniture.
Final Verdict
Despite the thinner padding and lack of integrated lumbar support, the superior materials and smooth mechanics make this a decent value for the money. It’s a sturdy, well-made piece of furniture.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 4
Good quality office chair with movable arms
Color: Dark, Color: Dark
This chair was relatively easy to put together. After unboxing and laying out all of the parts, my husband and I built it in 22 minutes. We noticed how the instructions have you put the tilt mechanism bracket on after putting the back and arms on. Another chair we built was the opposite, which made attaching it to the base actually easier. That way just made more sense.
This way, you put the back and seat together using the arms, then you attach the tilt mechanism to the bottom of the seat, but the seat is at an angle when you do this. Then you lift the whole chair and place it down onto the legs. I'm glad there were two of us to do that part. We also noticed one of the holes for screwing in the arm bracket was not lined in metal like the rest of them were. It still worked, though.
It does rock a bit back and forth. The height adjusting rod also locks the chair in place for when you don't want the chair to lean back. There is a knob underneath that allows you to loosen or tighten how much it moves when you lean back or rock.
The material is faux leather. It looks like real leather and feels pretty good. This makes it easy to clean. The arms can be raised level with the back of the chair to make it easy to slide out of the side of the chair. Overall this chair has a pretty classic look to it and is comfortable to sit in. It even has some lumbar support.
The way the back of the chair and the seat of the chair connect together leaves a little bit of a gap. Nothing major, but you could lose coins or keys through the gaps between the cushions. If you have a cat, this would be a great way for them to poke their paws through and say hello.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
EXCELLENT choice for the money!!!
Color: White, Number of Items: 1
I have never written a chair review, however; I feel this product warrants it.
I got this chair to replace an old chair in my studio. I scoured Amazon for hours to find it, and I am glad that I took the time to do so!
I was worried about material quality and durability at this price point, but my expectations were FAR exceeded. The piece goes together with a quickness (for me, under 10 minutes), and I only glanced at the instructions once.
Suffice to say, setup is simple and intuitive. Once the chair is together, there is a slight amount of play where the base plate attaches to the shaft, however it isn't a ridiculous amount. I only noticed as I was examining it and being critical after my initial excitement.
The materials used are very good, and much better than you would likely get from other chairs at this price. The chrome finish is nice, and the chair PU is uniform color with no defects.
One really nice feature are the zippered arm rest covers; when they get dirty, which (being white) they eventually will, you can unzip them, lay them flat, and clean them laid out, as opposed to struggling to scrub around 90 degree angles. I am sure this was easier for the manufacturer, but the end result helps the end user as well. Good on them for that.
Another thing I am very happy with is the height; I am 6'4" in bare feet, and my wife is 5'0". We both fit comfortably after adjusting. They definitely got the seat height right. And to that point (of size), at my height, and 260 pounds, there is plenty of room at the sides. Mind you, however, I am fit. That is not to say that a 5'10" guy that is 260 will find it comfortable. He may not. That said, most people should fit in this without an issue.
The casters had a positive snapping-in, and roll over my low carpet easily. This chair is definitely well built, save for the slight play mentioned earlier. In no way does that detract from it at all. The aesthetic fits my studio perfectly, and in all, I would not hesitate to recommend this chair.
If I have any issues with it, I will post an update review, but so far so good. I really love it. If you like the way it looks, pull the trigger. It is definitely worth the price, and more.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 6, 2021
★★★★★ 5
A great choice at affordable price
Color: White, Number of Items: 1, Color: White, Number of Items: 1
The design of the chair is sleek and nice looking at a very affordable price and a decent quality. It is the cheaper version of a more expensive one. The wheels move easily; the back of the chair tilts just enough; it is a deep chair to support my back (only 5"3), so I added a back pillow making perfectly comfortable to provide support needed for long period of times. If I have a negative comment, it is about the back of the chair being black so purely matter of esthetic.: and armrests narrower than I'd like and wrapped with 2 pieces of leather connected with a piece of fabric a bit loose with a zipper which will allow overtime to be completely removed and left with chrome completely if wearing out or simply if you prefer that look so options. A great purchase
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 5, 2025
★★★★★ 4
Great looking chair, a bit hard, fantastic value!
Color: White, Number of Items: 1, Color: White, Number of Items: 1
3 for comfort, 5+ for looks and 5 for ease of putting together so I landed on a 4+. I absolutely love the way this chair looks and it accents my other darker office items well. I'm 5'4" and can sit in the chair, all the way back without a pillow so the size works well for me. The back support is fine and you can adjust it if you want it straighter or rock back & forth. I changed out the casters for a more rollerblade type wheel when so I can't speak to the rollability of the included casters, but works well with the wheels I installed. Fantastic value and I'm soo glad I purchased it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 17, 2026