Matek Hall Current Sensor 150A

Matek Hall Current Sensor 150ASspecifications Hall effect current sensor No voltage drop and heat on current sensor components Offset and Sensitivity are calibrated in factory Continuous current rating: 0~150A DC Sensitivity: 20mV A, INAV BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50 VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21. 0 Power Consumption: 17mA Voltage offset error at zero current : + 10mV Curr output voltage error: 5%

Sspecifications

• Hall effect current sensor
• No voltage drop and heat on current sensor components
• Offset and Sensitivity are calibrated in factory
• Continuous current rating: 0~150A DC
• Sensitivity: 20mV/A, INAV/BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50
• VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
• Power Consumption: 17mA
• Voltage offset error at zero current : +-10mV
• Curr output voltage error: 5%
• Operating Temperatures: -30~80 °C
• 23 * 20* 23mm, 7g
• step file HCS-150A_step.zip

Pinout

• Vbat: for voltage sense, support 0~69V IN
• Volt: = 1/21 Vbat, 0~3.3V out
• Curr: Current signal, 0~3.3V out
• 5V: power supply for HCS-150A board, support 4~13V IN, 17mA
• G: GND
• TX/RX: for firmware update and configure (to be supported)

Tips

• mount Hall sensor far from iron and magnetic material

Included

• 1 x Matek Hall Effect Current Sensor 150A