Balancer 6s Passive 2.49v cutoff LTO lithium

Balancer 6s Passive 2.49v cutoff LTO lithiumOur in stock and shipping daily balancer for yinlong, scib, lishen, and any other cell made for 6s configuration and 2. 5v+ safe charging 3a max discharge circuit makes this unit adequate for up to 160ah of battery reserve reliably. If building a bank over 160ah We recommend going from 320ah of battery for instance down to 2x 160ah banks. this balancer has an internal shut off at 2. 49v to ensure your balancer doesnt drain your battery overnight, and

Our in stock and shipping daily balancer for yinlong, scib, lishen, and any other cell made for 6s configuration and 2.5v+ safe charging 😊

3a max discharge circuit makes this unit adequate for up to 160ah of battery reserve reliably. If building a bank over 160ah We recommend going from 320ah of battery for instance down to 2x 160ah banks.

this balancer has an internal shut off at 2.49v to ensure your balancer doesn’t drain your battery overnight, and also allows a silent operation. NO MORE BATTERY WINE! 

We will include a connect with 6mm lug leads for connecting to your bars as well as a plug so you do not need to pin the harness or change any jumpers on the board for LTO configuration.

board is labeled for - / +1-6 so wiring a balancer has never been easier! Always wire the balancer leads BEFORE plugging unit in. Ensure wires are connected properly before plugging unit in, we test every unit on a test lead and battery before shipping, we KNOW they work. If you wire it wrong you will break it, and there is no warranty for your wiring problems.

This is a DIY part and requires some knowledge as far as installation. We will include a simple diagram sheet for wiring your 6s battery, but nothing more. There are no returns or cancellations on DIY parts.