Pay in installments of $278.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HALTECH Elite 2500 + GM GEN IV LSx (LS2/LS3 etc) DBW Ready Terminated Harness Kit Injector Connector: Bosch EV6 (as per factory)Suits: Common US style Delco Bosch GM alternator connector. Pre wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. Includes: Elite 2500 ECU with DBW and Race Functions. engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key. Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT 040090 or HT 040091)
Suits: Common US style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only.
Includes: Elite 2500 ECU with DBW and Race Functions. engine harness with fuse block, firewall grommet, USB programming cable and USB Software Key.
Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
OVERVIEW
The fastest and most cost effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
- efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
- quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
- guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Haltech's Elite 2500 T takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500 T provides engine calibrators the tools they need to get the job done right. Alongside this ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
- Supports 1 to 12 Cylinder engines
- 2 to 4 Rotor engines
- Normally aspirated or forced induction
- Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
- Staged, Sequential, semi sequential, batch or multipoint injection patterns
- Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
- Connect to a wide range of display dashes and expansion devices via CAN.
- Waterproof Case (With Pocket Cover Fitted)
- 8 x Fuel Injection Outputs
- 8 x Ignition Outputs
- 12 x Digital Outputs
- 10 x Analogue Voltage Inputs
- 4 x Synchronised Pulsed Inputs
- 4 x Dedicated inputs (Dual Knock, ignition Switch & onboard MAP Sensor)
- 2 x Dedicated Engine Position Inputs with extensive trigger type support
- Up to 45 channels of Input & Output (I/O) expansion (via CAN)
- USB Laptop communication (Windows)
- ESP Calibration Software - Intuitive and easy to use
- harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
- programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.
FEATURES
ECU FEATURES
- Drive by Wire Throttle Control (DBW) - Requires (2) user defined outputs & (4) user defined inputs
- Low Impedance Injector control with Programmable Injector Peak and Hold Currents & Programmable peak time
- Flex Fuel Function (Direct sensor input) - Tune your engines boost, fuel and ignition by ethanol content
- Flexible tuning setup for Petrol (Gasoline), LPG, Methanol and Ethanol allows you to simply select your fuel type
- Closed Loop 02 Control - Dual bank control for precise tuning (With optional external CAN O2 Wideband Controller Kit)
- Dual Channel Knock Control - Synchronised to engine position with high speed digital filtering for accurate detection
- Variable cam control - Independently control up to 4 camshafts - Requires a minimum of 1 user defined input & output per variable cam
- Closed Loop Idle Speed Control with learning for consistent idle stability Requires 1 or 2 user defined outputs (BAC type) or 4 user defined outputs (Stepper motor type)
- Long term learning (Auto tune) on fuel, ignition, cam, boost & idle control maps (up to 4D)
- On-board data logging - Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory
- Laptop data logging -Data log all available channels directly to your laptop's hard drive for both tuning and diagnostics
- Dual CAN Bus communication for Haltech Dashes and expansion devices, Supported OEM CAN & OBDII (view live engine data & set and clear diagnostic trouble codes)
- Injection Stages 1 - 4 with individual injector flow rates per injector
- 8 Injector drivers for 2 sequential stages on 4 cylinder & 3 rotor engines and up to 4 sequential stages on 2 rotor engines
- Anti-Lag/Rotational idle - for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions
- Rolling Anti-Lag - lock to your current (or pre-set) RPM or road speed for roll racing or pit lane limiting
- Launch Control - Control your engines power delivery, RPM & boost for consistent performance at the start line
- Traction Control - Control your engines power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
- Tuning Table Resolution up to 32 x 32 x 8
- Limitless tuning flexibility -Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user definable corrections
- tune by a combination of manifold pressure, throttle position, cam position, ethanol content, gear, road speed, race time, EGT, shock travel, ride height or any channel for ultimate flexibility - Dual mapping is a thing of the past.
- Per Cylinder Tuning Correction - 3D
- Wideband O2 - Connect up to 9 Channels via CAN expansion devices
- Thermocouples/EGT (Exhaust Gas Temperature) - Connect up to 12 Channels via external CAN expansion devices
- Engine Protection - Set advanced multi-level limits for sensors and protect your engine against common causes of failure
RACE FUNCTIONS
- Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays & banked control options.
- fuel and ignition corrections for all stages.
- Boost Control -Intelligent 4D Closed loop, with learning, flexible user definable axis and 14 fully user definable boost target and duty cycle corrections.
- modes - example boost by gear, road speed, race timer, shock travel, ride height etc.
- Sequential turbo control
- CO2 Boost control, wastegate pressure & position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer
- Flat shift - Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
- Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery
- Timer Functions - Use the combination of the race timer and 5 additional programmable timers for time based control of multiple engine parameters, power delivery and other user definable functions
- Trans brake function allows smooth and consistent control of start line staging (Bump or Creep)
- Advanced Torque Management - A fully integrated driveshaft RPM target race function that provides the ultimate control and consistency for the serious drag racer, eliminating the need for costly external controllers
RESOURCES
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 4
Heavy linen character, but a beautifully tailored suit!
Color: Beige, Size: 4, Color: Beige, Size: 4
This is a really nice linen suit! The jacket is beautifully made and well-tailored, with a fun speckled texture that has lots of pretty color variation (we ordered the beige). When I placed it side by side with a similar linen suit from another brand, the difference in the linen texture was really noticeable — this had a much stronger linen character that stands out!
It has three useful pockets on the outside of the jacket, which is great for little hands. The only downside is that one of the inside pockets is just for show (faux), which was a bit surprising and somewhat disappointing for my little guy.
The pants have pockets too, but they aren’t very deep — perfect for small treasures, but not much more. The pants are made from a lighter, thinner single-layer linen compared to the fully lined, double-layer jacket, which makes sense for comfort and easy movement.
The pants didn’t come with a front crease ironed in, so you’ll want to press one yourself. The linen did pick up some creases from being folded in the package, but it doesn’t seem quite as wrinkly as some other linen fabrics I’ve tried. Still, like most linen clothes, especially for boys, the pants will need occasional ironing to keep them looking neat and crisp, especially after a day of play and general wear. The structured, lined jacket stays looking smoother and more put-together with less effort.
It also came with a bow tie, a neck tie, and a tuxedo-style white shirt as extras. The ties aren’t great quality — they’d work fine for quick photos but probably won’t hold up to much actual wear. The formal white shirt feels a bit funny paired with the casual linen suit, but I don’t mind at all. We already have white shirts that we prefer, so we’ll use those instead. For us, the extras are really just bonus items we won’t plan on using.
Overall, it’s a handsome little suit that’s perfect for special occasions like weddings, family photos, or holiday events. My kid looked adorable in it! The stronger linen texture on the jacket gives it a premium feel that I really like. Just be ready for a bit of extra care with the pants to keep everything sharp.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 8, 2026
★★★★★ 5
Great suit set
Color: Light Grey, Size: 4
It is incredibly attractive and includes everything a young child needs for a special occasion.
The material is a 75% polyester and 25% linen blend, and the outer fabric feels remarkably smooth. Its unstructured design allows for an attractive, natural drape, and the blend conveniently allows for machine washing at home.
As is typical with linen-based materials, the fabric can be naturally stiff and prone to wrinkling, so I recommend ironing or steaming it before use. The lightweight feel makes it an excellent choice for the spring, summer, and fall months.
Overall, this suit offers exceptional value for the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 5
Summer wedding kids suit
Color: Navy, Size: 10 Years, Color: Navy, Size: 10 Years
Bought this suit for my son in the 10 youth size and honestly was pleasantly surprised by the quality for the price. The navy color looks sharp and dressy without being too stiff or uncomfortable. The material has a little stretch, which helped it fit nicely and made it comfortable for him to move around in.
The adjustable waist was a huge plus, especially for growing kids. It fit true to size overall, though the blazer sleeves were slightly long on my son. The pants had a nice slim look without being too tight. We paired it with white sneakers for a more modern look and it came out adorable.
This would be perfect for weddings, graduations, concerts, communion, school events, or family photos. Overall, very happy with the purchase and would definitely buy again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
★★★★★ 5
Very Modern Handsome Suit
Color: Grey, Size: 7 Years, Color: Grey, Size: 7 Years
This is an incredibly sharp looking suit for the little guy. Great price and features, too. I made a mistake in sizing up instead of down and first one was too sloppy on him and would need alterations. He is thin and very thin in the waist. There is a lot of adjustment with buttons in waistband and coat hides the bunching. This shirt and coat will easily take a fuller body than slim I believe. He loves posing in it and feels very classy. Best purchase for a formal suit that will last longer than most kids clothes size wise. Felt bad about returning but careful folding and packing got it good as new.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026
★★★★★ 5
Quality
Color: Black, Size: 7 Years, Color: Black, Size: 7 Years
Excellent quality, My son looks incredible
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2026