SKU: 95059893969

Fits Ford F-250 SD (11-14) 6" Lift Kit; Diesel; Radius Arm; No OVLD; 541.2

$674.98 $749.98
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $187.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 7 - Aug 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fits Ford F-250 SD (11-14) 6" Lift Kit; Diesel; Radius Arm; No OVLD; 541.2Compliment your 11 14 Ford F 250's aggressive, good looks with Rough Country's 6 inch Radius Arm Lift Kit. Rough Country's 6 inch Lift Kit was engineered to retain the F 250's impressive factory specs while bumping up performance and durability where it's needed most. The result is an aggressive, lifted beast with a mean profile and balanced on and off road ride quality. When changing a vehicle's suspension, the key to preserving ride quality is in

Compliment your 11-14 Ford F-250's aggressive, good looks with Rough Country's 6-inch Radius Arm Lift Kit. Rough Country's 6-inch Lift Kit was engineered to retain the F-250's impressive factory specs while bumping up performance and durability where it's needed most. The result is an aggressive, lifted beast with a mean profile and balanced on and off-road ride quality. When changing a vehicle's suspension, the key to preserving ride quality is in keeping the geometry of all suspension components as close to their factory angles as possible. Rough Country's new 6-inch Radius Arm Suspension Lift features a set of ultra-durable Radius Arms, precision fit to bolt right into the factory mounts for an easier install and a more factory-like angle. At 27lbs each, these beefy, upgraded Radius Arms dwarf stock equipment while and feature durable durable rubber bushings for maximum vibration absorption. This all-inclusive kit also features an adjustable alignment cam at the axle to allow caster adjustment as well as a track bar relocation bracket and a drop pitman arm. A full set of N2.0 Shocks provide a truly balanced ride quality for on and off-road use - perfect for daily drivers. This kit also ships with a set of durable, lifted coil springs and brake line relocation brackets. This innovative kit design features a 100% bolt-on installation process that is lightning fast compared to other kits this size. Save time and money with no need for cutting, drilling, or other complicated procedures. Rough Country's 6-inch Radius Arm Lift Kit is backed by our Lifetime Replacement Warranty.


Features:

  • 100% bolt-on installation Increased ground clearance Levels the front with the rear of the vehicle Includes heavy-duty radius arms equipped with durable durable rubber Bushings for maximum vibration absorption.
  • New radius arms help maintain factory angles.
  • Includes adjustable alignment cam at the axle to allow caster adjustment Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use.
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
  • Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.

Application:

Year Make Model Submodel
2011-2014 Ford F-250 Super Duty King Ranch
2011-2014 Ford F-250 Super Duty Lariat
2013-2014 Ford F-250 Super Duty Platinum
2011-2014 Ford F-250 Super Duty XL
2011-2014 Ford F-250 Super Duty XLT
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 95059893969

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
JJ
Lake Worth, US
★★★★★ 5
3rd Update! See review... Good stuff and works as advertised...
Update - 3rd oil change/flush. Engine oil draining from engine is waaaay cleaner than my first flush. Probably won't need to do a 4th time for several changes. I added Ceratec at this change and am amazed how much better the engine performs since my initial flush. Less clatter and very smooth idle. (Jeep 4.0 I6) Update- 2nd change and used the flush again. About 7000 miles from first use. The oil was cleaner and less "gunky" as first time but oil was definitely dirtier than normal. Right away noticed off idle throttle response improved. Then on a drive I take regularly with a mountain pass and long downhill I noticed that even tho the jeep downshifted out of OD it took much less throttle to hold 65 up a long grade. On the downhill normally I would see 50-60 mpg max on the digital readout. This time. It went to 99 which to me indicates more vaccum below the throttle plate. My guess is the rings freed up a bit more than the first flush and highway mileage is up to 23+ where I would get 21 before. Nice! Used in 2001 Jeep Grand Cherokee. 140k miles and a ticking lifter (common in the 4.0 - 6 cylinder...). Definitely cleaned sludge (oil filter very heavy!) and oil was dark when draining. Idles smoother, oil stays cleaner longer, slight oil pressure increase and runs cooler. The lifter still ticks but probably a cam lobe issue. Will use it after 7500 miles or 1 year. Will report back after next change.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2017
J
Verified Purchase
J N Brown
Chelsea, US
★★★★★ 5
Tips and tricks
I watched several videos by professionals who used this. Follow instructions. Make sure the engine is warm before you put it in. Make sure you have everything you need. The biggest tip I got that was repeatedly emphasized by the pros was to buy a “cheap” oil in addition to the new oil. After you run the flush drain the oil and flush. Put the cheap oil in and “rinse” the inside of the engine with the cheap oil. Then drain again. Replace the oil and filter with your good stuff. I followed these instructions or suggestions and…. I sat in the truck while the flush was running. It’s a 13 year old truck with 150,000 miles. It was running strong but burning oil and kind of loud. Sounded like it was growling. There were some ticking type noises that made me nervous. As I sat in the truck and let the flush cycle through the engine at idle I could literally hear the flush working. Very slowly it was like someone gave the engine a Xanax and you could hear it getting quieter and calming down. I drained, rinsed with cheap oil only letting the cheap oil run through at idle for another 15 minutes then drained again. The oil flush was clearly important. It didn’t come out as black as the first drain but it looked like old nasty oil. The truck is no longer burning oil. My gas mileage has increased significantly and it is running so quiet and smooth it’s unbelievable. I used a little less of the liquid Molly flush than it called for regarding the flush to oil ratio. I didn’t want to do something too intense to the inside of the engine. But the results were remarkable. Just as advertised after following the instructions. I also added the liquid Molly oil additive to the final oil change to ‘lube’ the inside of the engine. I plan to do another flush in about 10,000 miles. All that to say, yes, you won’t be disappointed as long as you follow instructions and a few tips and tricks. My truck is almost running like a brand new truck and again it’s an old and tired truck. I will use this as part of a high mileage maintenance and perform the flush every 50,000 miles or so. I feel confident it will extend the life of my engine based on the results
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 9, 2024
C
Verified Purchase
ChimChim
New York, US
★★★★★ 4
Seems to have helped
Bought a used 2020 Jeep Sahara 2 liter turbo charged with 80k miles from a dealership. Dealership had just changed oil the day of purchase. Drove it home 30 miles down interstate and another 20 back roads, it ticked and tapped allot at idle and the dip stick was varnished. I added the flush, let it idle for 10 minutes and drained it. The new oil from the dealership drained out jet black, no light could pass thru it. I changed the oil with Walmart oil and a cheap oil filter and let it idle for 5 minutes to clean out all the engine flush, it drained out clean and clear. I refilled it with Pennzoil Platinum High Mileage oil and a Fram Ultra Synthetic oil filter. It's been a week and the engine is noticeably quieter and smoother since using this product. If nothing else it cleaned allot of carbon from inside of my engine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2025
T
Verified Purchase
The Inspector
Boise, US
★★★★★ 5
HOLY CRAP!!!!
So my 2005 Durango has a 5.7 and I put on 253,000 miles on it before it blew a head gasket. Since it was summer, iI decided I'd tackle it myself. The upper end was so full of gunk, I can't believe I hadn't had serious issues. Anyway, I apparently dropped some pieces of crud down the oil channels, 'cuz after putting it all back together, I got alarms for low oil pressure. Figuring I'd try anything else before replacing the oil pump, i gave this stuff a try. WOW!!!! Not only did the oil pressure return, the engine runs SO much smoother! I had forgotten how smooth it ran when it was new. The caveat is that apparently the gunk was the only thing keeping some areas from leaking - as it lost oil at a startling rate. 1 bottle of the Liqui Oil Saver though, and within a week the oil leaks completely stopped.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 8, 2025
M
Verified Purchase
Marlana Lupo
Massapequa, US
★★★★★ 5
Awesome!!
Had a check engine light come on for cam shaft position. Did some research online about the specific code and found that I could be due to sludge in the engine. Added this and ran for about 30 minutes and then had the oil changed. The light never came back on and the engine is running smooth and quiet. Will definitely use again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026

recommand products

1969 Pontiac GTO Convertible Fuel Line Kit 3/8 Inch Tank to Pump Line AGL6912SS
44.76
1968 Chevrolet Chevelle Hardtop Fuel Line Kit 3/8 Main Fuel Line - CGL6815OM
58.67
Chisel Daplaghien Powder - American White
28.30
OPI Dip Powder 1.5oz - L72 OPI Red - PPW4 Collection
11.40
HB298F.787 - Hawk HPS Brake Pads; Front
181.00