Kodak 30 ESP Office 2100 / 2150 / 2170 Hero 3.1 / 4.2 Printhead Printer Head

Kodak 30 ESP Office 2100 / 2150 / 2170 Hero 3.1 / 4.2 Printhead Printer HeadFeatures: High quality and durable Fit perfectly for your machine Replacement For Kodak 30 Series Full color function. This Is Aftermarket Replacement Item But Not Genuine. Size: 80x40MM Fitment: Kodak ESP C100; Kodak ESP C110; Kodak ESP C310; Kodak ESP C315; Kodak ESP C300; Kodak ESP Office 2100; Kodak ESP 2150 Kodak ESP 2170 Series; Kodak ESP 3. 2; Kodak HERO 3. 1; Kodak Hero 4. 2; Kodak Hero 5. 1 Package Included: 1 x print head Note: 1. In print

Features:
High quality and durable
Fit perfectly for your machine
Replacement For Kodak 30 Series
Full color function.
This Is Aftermarket Replacement Item But Not Genuine.
Size:80x40MM

Fitment:
Kodak ESP C100;
Kodak ESP C110;
Kodak ESP C310;
Kodak ESP C315;
Kodak ESP C300;
Kodak ESP Office 2100;
Kodak ESP 2150
Kodak ESP 2170 Series;
Kodak ESP 3.2;
Kodak HERO 3.1;
Kodak Hero 4.2;
Kodak Hero 5.1

Package Included:
1 x print head

Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.