SKU: 92364981731

ICON K67112 7" Stage 2 Suspension System

$3041.64 $3379.60
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $844.90 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ICON K67112 7" Stage 2 Suspension SystemOrder the Icon K67112 7" Stage 2 Suspension System from GAP to increase ground clearance on your 2017 2022 Ford F 250 350 6. 7L Powerstroke 4WD. This Icon Vehicle Dynamics 7" suspension system is a great way to lift your 4WD 2017 2022 Ford F 250 F 350 Super Duty while drastically improving ride quality and performance. This suspension system is perfect for on road and off road use including towing, job site duty, and general off road adventure. Icon's

Order the Icon K67112 7" Stage 2 Suspension System from GAP to increase ground clearance on your 2017-2022 Ford F-250/350 6.7L Powerstroke 4WD. This Icon Vehicle Dynamics 7" suspension system is a great way to lift your 4WD 2017-2022 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance. This suspension system is perfect for on-road and off-road use including towing, job site duty, and general off-road adventure. Icon's 7" Stage 2 System is comprised of dual rate coil springs, progressive leaf springs, radius arm drop brackets, adjustable track bar, dual opposing steering stabilizer kit, Icon 2.5 Aluminum Series internal reservoir front and rear shocks, plus all of the necessary hardware for installation. With the endless hours Icon has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.

Features:
  • Approximately 50% Increased Front Wheel Travel Over Stock
  • Icon-Engineered Dual Rate Coil Springs Deliver Exceptional Vehicle Control Over Varying Terrain
  • Progressive Leaf Springs Improve Ride Quality Without Reducing Towing Capacity
  • Radius Arm Drop Brackets Correct Geometry And Caster For Optimal Alignment Specs
  • Icon Shocks Feature Vehicle Specific Tune For Superior Performance And Ride Quality
  • Shocks Are Fully Rebuildable And Re-Valvable
  • 2.5 Aluminum Series Front And Rear Shocks Feature One-Piece Impact Extruded Aluminum Cylinders For Excellent Corrosion Resistance And Consistent Finish
  • FK Rod End Bearings Provide Extended Longevity And Minimal Deflection
  • Lifetime Guarantee Against Coil Spring Breakage Or Sag
  • Lifetime Guarantee Against Icon Fabricated Component Breakage Or Manufacturer Defect



Notes:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: Icon Alloys | 17x8.5" w/ 5.00" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 18x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Wheels: Icon Alloys | 20x9" w/ 5.25" Backspace / 6mm Offset
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Application Note #6: Springs Are Rated For Diesel Engines Only
Application Note #8: This System May Require A Carrier Bearing Drop Bracket Kit (33700)
Application Note #31: '08 - Current Super Duty Models With Gas Engines May Need Exhaust Modified To Clear Front Driveshaft
Application Note #55: Shocks Are Fully Serviceable. Coil Over Heights Indicated Are For A Stock Equipped Vehicle
Application Note #57: Factory Block Must Be Used In Conjunction With Icon Leaf Springs For Truck To Sit Level
Application Note #118: OEM Stabilizer DOEs Not Work With Required Drag Link Flip On This Kit

Tech Notes:
2017-2019 Super Duty models will have front lift height of 7" over stock.
2020-2022 Super Duty models without Tremor package will have front lift height of 7.75" over stock. May require taller rear blocks with springs to sit level.
2020-2022 Super Duty models equipped with Tremor package will have front lift height of 6.75" over stock. May require taller rear blocks with springs to sit level.
Brake line kit (Part # 61110) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 92364981731

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
J. Lam
Draper, US
★★★★★ 4
most can fit saros 10, but not all
Color: Saros 10R/Qrevo CurvX Accessories Kit, Color: Saros 10R/Qrevo CurvX Accessories Kit
I should have done a little more research with these. I purchased this for a Saros 10, i thought the Saros 10 and 10R was basically the same besides the filters. I was wrong. Although the brushes are the same size, they didnt fit. They lacked a special metal piece on one side, and the 10R has a different shape on the other, cant even jerry rig it to fit. The filters didnt fit my Saros 10, but that didnt cause the dropped rating, but they quality of it looks very good, and seems well made. The side brushes are good and they fit my Saros 10, replaced them and didnt have a problem. The bags also fit and they are very good. The mopping brushes did not fit, but it was very well made and definitely wasnt just a cheap set. The brush and screw driver were just to add additional number counts and basically useless.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 26, 2026
K
Keith McElroy
Phoenix, US
★★★★★ 5
Everything you need for your robot maintenance
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
Automatic floor robots are a great convenience and, at this point, I can't picture our house without one. Being able to turn them on at night and wake up to vacuum and mopped floors is pretty amazing. The problem is that you eventually have to do maintenance on them to keep them running. I guess it's not that much to ask of you since they do go for a long time with only water refills and waste water dumps. It's hard to find kits that are comprehensive enough to cover all the needs, so when I saw this one, I had to pick it up. The kit contains multiples of every consumable on the Roborock (ours is named Mrs. Nesbit). It also comes with a screwdriver and a blade/brush to clean dirt and hair. The small spinning brush is easy to replace, and the only one you need the screwdriver for. The mopping pad functional on the Roborock is one of my favorite features, so having multiple replacements makes this kit very attractive. They simple peel off of the Velcro and lay back the same. The split rollers take a minute to figure out, but you don't need to loosen the screws - they pull right off the U shaped plastic pieces they are attached to, but keep track of which goes with which color because each plastic piece only goes back on its correct side. The easiest to replace is the filter on the dust bin in the robot since it just pops out and the new one fits in. The lasts step is to replace the dust bag in the base itself, which is very simple. Overall, the quality and fit of all the pieces included in this kit were great. I didn't run across anything that was off or I had to force on. While my pads and brushes weren't as bad as my other vacuum (named The Beast), the vacuum had been warning me that their life was coming to an end and I needed to swap them out. Now I have multiple replacements for the future and my Roborock is good to go for many months. I will be picking this kit up again when I run out and wouldn't hesitate to recommend it at this price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
N
Nancy
San Leandro, US
★★★★★ 4
Good Budget Replacement Set, but Mop Pads Differ from Original
Color: Saros 10r-20/Qrevo Curvx Accessories
These replacement accessories fit my Roborock Qrevo S5 without any issues. I run my robot daily because I have a dog, so I go through mop pads pretty quickly and have already used this set for a couple of cleaning runs around the house on vinyl floors. The bags seal properly, and I did not notice any loss of suction or performance with the filters compared to the original parts. The biggest difference was the mop pads themselves. They feel noticeably different from the OEM Roborock ones and seem a bit lower in quality. Even so, they still got the job done for normal daily cleaning and handled pet hair and dirt well. Since the original pads also wear out for me after multiple washes, this set still feels like a practical and more affordable alternative overall.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
S
Super Duper
Massapequa, US
★★★★★ 3
Not as good as the oem accessories
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
I have a roborock saros 10r and all of these accessories seem to be compatible and work with my robovac however the quality of them isn’t nearly the same level. The mop pads material are much coarser and less fine than the original. The side brushed bristles weren’t nearly as tightly bound together. The roller brush isn’t as well made. The cleaning performance I think is similar but i suspect they will not last as long as the oem accessories which are just much better made. Over it’s a mix on value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
E
Ed
Houston, US
★★★★★ 5
All the parts needed to maintain your Roborock robot, with a great fit and finish.
Color: Saros 10r-20/Qrevo Curvx Accessories, Color: Saros 10r-20/Qrevo Curvx Accessories
This is a great consumable parts replacement package for many Roborock robots. I utilized it for my Saros 10R. The parts all fit great and honestly look and feel just like the OEM parts that came with the robot. Over time, I have purchased new consumable parts for my Saros 10R from various sources, but I think that I will be using this kit in the future. The kit comes with everything one needs to maintain Roborock robots, as outlined in its description. The main brushes are of good quality and fit well. I have found that the main brushes and the filter fit are the hardest things for third-party vendors to duplicate, and these do that well. What I like most is the mop heads. They are of very good quality and may be better than the OEM mop heads. Everything in this kit fits well and mimics the manufacturer's parts closely in both quality and fit. Compared to the cost of Roborock OEM parts, this is a home run.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026

recommand products

Weightless Volume Refreshing Mousse 200ml
16.50
Texture & Finishing Spray 5.4oz
12.50
Fiber Pomade
22.00
Hand Soap Liter
10.00
Ultimate Repair Shampoo
39.63