Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
BetaFPV F4 1S 5A AIO Brushless Flight Controller V3 (ELRS 2.4G)Features Betaflight serial passthrough. It is convenient for pilots to flash any version of ELRS RX firmware and especially can flash ExpressLRS V3. 0 without updating flight controller firmware. The SPI Frsky version board reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers. Built in an 8MB flash memory chip dedicated to Blackbox logging. It's an extremely powerful tool for tuning and
Features
- Betaflight serial passthrough. It is convenient for pilots to flash any version of ELRS RX firmware and especially can flash ExpressLRS V3.0 without updating flight controller firmware.
- The SPI Frsky version board reserves an SBUS port and a UART port, which is available for the SBUS protocol receiver or other external receivers.
- Built-in an 8MB flash memory chip dedicated to Blackbox logging. It's an extremely powerful tool for tuning and troubleshooting an FPV drone.
- Integrated motor pin connectors, it is easy to install motors without soldering work.
- Particular design with only 3.6g ultralight weight, reasonable layout, and easy to build. With a 26*26mm mounting hole size, it is fully compatible with the whoop frame in the current market.
Specifications of FC
- CPU: STM32F411CEU6 (100MHZ)
- Six-Axis: BMI270
- Built-in Receiver: Serial ExpressLRS 2.4G/SPI CC2500 (Frsky)
- Receiver antenna: Line antenna
- FC Size: 30*30mm
- Mounting Hole Size: 26*26mm
- Firmware version: betaflight_4.3.1_BETAFPVF411 (ELRS)/betaflight_4.2.11_BETAFPVF411RX (Frsky)
- OSD: Built-in BetaFlight OSD
- Blackbox: 8MB
- Recommend VTX: >=200mW, like BETAFPV M03 350mW VTX or TBS Unify VTX
- Power Cable: 55mm, with BT2.0 connector
- Weight: 3.6g(ELRS)/3.7g(Frsky), without power cable and BT2.0 connector
Specification of ESC
- Power supply: 1S
- Current: 5A continuous and peak 6A (3 seconds)
- ESC firmware: A_X_5_.HEX for BB51 BLHeli_S hardware
- Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
F4 1S 5A flight controller with BB51 ESC hardware could flash the Bluejay ESC firmware now, which is based on BLHeli_S revision 16.7. With Bluejay ESC firmware, it supports bidirectional D-shot and RPM filtering in Betaflight, offers 24KHz, 48KHz, and 96KHz fixed PWM frequency for options, and custom start-up melodies
Pinout
Included
- 1 * F4 1S brushless flight controller (BT2.0 Connector)
- 4 * M1.2x4mm screws
- 4 * M1.4x5mm screws
- 4 * Anti-vibration rubber dampers
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 1514 reviews
Sort
Product Reviews
★★★★★ 5
Good stuff!
Size: 1 Kit
Good product, made a big difference. Easy to apply, Will buy again when needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
★★★★★ 4
I'm Not Disappointed ...
Size: 1 Kit, Size: 1 Kit
I knew going in that my expectations shouldn't be very high because my car is a first generation 2010 Kia Soul. So its old with 16 plus years of yellowing oxidation and some abrasion. I took a chance with doing this because of the reviews and pictures. To my surprise, it worked better than I anticipated and could hope for. My driver side(left) headlight was horrible but my passenger side(right) wasn't too shabby and didn't require as much care. This would have turned out better if I had power drill attachments of the same sanding grit to do this. My arm is going to be really sore come Sunday. 😆 It wasn't too hard to follow the instructions as they were very simple for the application process. I don't know about the 2 years for it lasting, but for now, its durable. Once I drive at night, I'll be able to
But all in all, it worked for me and its better than before I tackled it. All in all it looks good, I feel like I'll have a better beam when night 🌙 driving.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2026
★★★★★ 5
Works great. Definitely a good buy and value.
Size: 1 Kit
This was easy to use and made a world of difference on the lenses.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Let this restoration kit light up your life
Size: 1 Kit
I have a car that is 24 years old and is my daily driver. Understandably, the headlight lenses have deteriorated to the point where I was using my brights exclusively at night yet never being flashed to turn them down. I got quotes between 60-80 dollars per headlight for restoration which I just wasn't willing to pay so I decided on this kit to try restoring them myself. I read reviews before I ever make a decision on a product and noticed many reviewers of other products stated that this product works better so I went ahead and purchased it. Man, am I glad I did!!!
The kit arrived late this afternoon, I opened it, READ AND FOLLOWED THE INSTRUCTIONS and within 1 1/2 hours had turned a travesty into a triumph. I started by taping around both lights with 1 inch blue painters tape to protect the paint around the lights. The kit comes with everything necessary to remove most moderate deterioration but be sure to purchase one that corresponds with your actual situation. I believe my lenses were far beyond "moderate" but with some heavy elbow grease, the correct use of both supplied sanding disks and my hose set on "mist" I was able to sand off years of damage leaving behind a smooth, albeit opaque surface. After making sure everything was totally dry using both towels and my leaf blower, I was ready for the Magic!!! I opened the first clearcoat package (while wearing the provided glove) and lightly but steadily applied the liquid with the supplied towelette and the required 50% overlapping passes. The opaque lenses instantly turned clear upon contact with the clearcoat. After waiting around 25 minutes to be sure the lenses were completely dry I opened the second package of clearcoat and applied it in the same manner as the first. I had no misses or problems with my first coat but for those who do...NOW is the time to make corrections, NOT during the first coat process. Leave things to dry for around an hour and you are done.
The end result? AWESOME, INCREDIBLE, UNBELIEVABLE...shall I go on??? Not necessary, but I can say I am thrilled with the outcome. My wife said the lights look new and I agree, there is a night and day difference between before and after.
Only time will tell how long the restoration lasts but for now I am very very happy with the results I got from this 3M product. I highly recommend it to anybody who can read, understand and follow the instructions. 5 stars all the way on this one!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 24, 2025
★★★★★ 5
Excellent 3M Headlight Restoration Kit!
Size: 1 Kit, Size: 1 Kit
Better than expected results. This 3M Kit needs no drill; all done by hand. Check out their videos on YouTube; follow the easy instructions. This $10 3M Kit, an hour and a half of my time, saved me over $300! What a serious savings! Thank you 3M for another fantastic product!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026