NewBeeDrone Hummingbird Whoop RaceSpec V2 BNF

NewBeeDrone Hummingbird Whoop RaceSpec V2 BNFThe Hummingbird Whoop RaceSpec V2 is the next evolution of our dedicated racing whoop series, built for professional FPV racers who demand precision, durability, and peak performance. Designed as the successor to the Hummingbird V3. 1 RaceSpec, this new version refines and optimises every aspect of the drone for serious competition. Weve made significant updates to enhance stability, power handling, and durability without adding unnecessary weight,

The Hummingbird Whoop RaceSpec V2 is the next evolution of our dedicated racing whoop series, built for professional FPV racers who demand precision, durability, and peak performance. Designed as the successor to the Hummingbird V3.1 RaceSpec, this new version refines and optimises every aspect of the drone for serious competition.
We’ve made significant updates to enhance stability, power handling, and durability without adding unnecessary weight, because every gram matters when you’re pushing the limits on the track.

Features

• Upgraded Flight Controller – Stable & Efficient Power
  • The MCU is upgraded to AT32 F4 with a 216MHz clock speed (previously 288MHz). This intentional downgrade prioritises stability and reliability, ensuring consistent performance in demanding race environments.
  • Double N MOS ESC design (upgraded from N+P MOS) provides up to 18A per channel, delivering superior efficiency and power handling.
  • No onboard USB port to reduce weight – instead, we’ve included a USB-C adapter for tuning when needed.
• SmartMax VTX – Power & Compliance in One
  • Adjustable VTX power up to 400mW with SmartMax thermal regulation, ensuring the board stays protected while delivering high power.
  • Precise 25mW output, just like the previous version, keeping you within race-legal limits. No worries about exceeding VTX power limits in competitions.
• Race-Optimised ExpressLRS Receiver
  • Now featuring a UART-based ELRS receiver, allowing race mode activation, WiFi settings configuration, and seamless performance tuning.
  • Uses a ceramic SMT antenna, which is not only lighter but also significantly more durable, perfect for intense racing conditions. 
  • This ELRS Receiver is not official approve by ELRS team because the ESP8285 are no longer adapted by the new ELRS design guideline. If you need to update the firmware, here is the firmware
• Enhanced Build for Durability & Simplicity
  • Reverse plug-in protection added to prevent catastrophic failures due to incorrect power lead soldering—a common issue with non-standard BT2.0 power cable colors.
  • Bigger solder pads for motors and no motor plugs, designed for RaceSpec professionals who prefer direct soldering for ultimate reliability.
  • Brand-New BeeEye V2 Camera – Lighter, Sharper, Better
  • Featuring a 10x10mm footprint PCB, reducing weight while improving colour accuracy and overall image performance—giving racers better visuals for precise control.
• Optimised for Betaflight 4.5.2 RacePro
• Preloaded with Betaflight 4.5.2 RacePro firmware, similar to the previous KAACK firmware, ensuring top-tier race tuning and responsiveness.

Specifications

• Weight: 16.5g
• Flight Controller: AT32 F4 (216MHz)
• ESC: Double N MOS (up to 18A per channel)
• Motors: HMB RS 0702 30000KV RaceSpec
• VTX: SmartMax up to 400mW with thermal regulation
• Receiver: UART-based ELRS with WiFi settings
• Antenna: Ceramic SMT for durability and weight savings
• Camera: BeeEye V2 (10x10 PCB)
• Battery Connector: A30 (compatible with BT2.0, recommended 300mAh 1S 3.8V)
• Firmware: Betaflight 4.5.2 RacePro

Flight Controller

• MCU: AT32F4
• GYRO：42688
• VTX: True 25mw and up to 400mw SmartMax 5.8g Analog VTX
• ESC: 18A pre-flashed with Bluejay 0.19.2 48kHz
• ESC Connector: direct solder Pad Recommend Whoop RaceWire
• OSD: NBD7456 graphical OSD compatible with Betaflight OSD Perfect Edition
• Receiver: Uart ExpressLRS 2.4G with SMT Antenna (ESP8285)
• Flight Controller Weight: 4.71g (Include antennas and battery connector) 
• Flight Controller Size: Outer dimensions: 29x29x7.6mm
• Flight Controller Holes: 25.5x25.5mm
• Battery input: 1S Only（Recommend  300mAh 1S 3.8V）
• Uart1:free
• Uart2:free
• Power Plug:  GNB A30 Connector compatible with BT2.0

Binding Instruction: Since its UART base, you plug in battery 3times to trigger the bind mode or power on wait for 60seconds to get into wifi mode and input your bind phase)

Important Notice – Read Before Purchase

The Hummingbird Whoop RaceSpec V2 BNF Drone is a high-performance racing drone built exclusively for professional FPV pilots. It is engineered for extreme speed, precision, and agility, and should be treated like a race car—not a beginner-friendly vehicle.

If you’re new to FPV or unsure of your piloting skills, this product is not for you.

Browse more

• Browse all F4 Flight Controllers
• Browse all Flight Controllers
• Browse all Newbeedrone