SKU: 81445228479

Carli SPEC 2.5" Leveling Backcountry 2.0 Suspension System 17-19 Ford 6.7L Powerstroke

Sale price$1308.60 Regular price$1454.00
Save 10%

Pay in installments of $363.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 31 - Aug 5

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Carli SPEC 2.5" Leveling Backcountry 2.0 Suspension System 17-19 Ford 6.7L PowerstrokeWhen most people think about a "leveling kit," they think about a spacer that goes between the front coils and coil buckets to effectively raise the front of the truck several inches. While this type of product does "level" the truck for fitment of larger tires, it does absolutely nothing to improve upon the handling and overall suspension performance of the vehicle. In fact, this type of system will typically degrade these factors, as the existing

When most people think about a "leveling kit," they think about a spacer that goes between the front coils and coil buckets to effectively raise the front of the truck several inches. While this type of product does "level" the truck for fitment of larger tires, it does absolutely nothing to improve upon the handling and overall suspension performance of the vehicle. In fact, this type of system will typically degrade these factors, as the existing shocks are over extended, the caster is not accounted for, and the axle is offset because the factory track bar is still in place. If you want to level your truck the right way, then this is the system for you!

CARLI SPEC 2.0" REMOTE RESERVOIR SHOCKS

The Backcountry 2.0 Suspension System from Carli is about leveling your truck the RIGHT way. It's designed for people seeking light to medium off-roading while still maintaining good on-road driving. Utilizing Carli SPEC 2.0″ diameter shocks tuned for slow to mid speed off road use as well as all-around comfort and ride quality while driving in town, on the highway, towing, or hauling. Carli SPEC 2.0 boasts an aluminum body, hardened steel shaft, and full rebuild-ability. The shocks contain premium 5WT oil to balance lubricity, consistent damping and the widest available range in temperature variation. Your truck will sit 2.5” higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. To accommodate the additional travel, the kit contains improved brake lines, an adjustable track bar, and caster adjusters to improve on the stock handling.

ADJUSTABLE TRACK BAR

The truck will sit 2.5” higher in the front and have more wheel travel thanks to the lighter rate Carli Coil Springs. The Adjustable Track Bar centers the front axle and Stainless Brake Lines firm up braking and ensure there is enough line for the newfound travel. To round off the front end, Carli includes Caster Shims to tighten the steering and a fabricated, High-Clearance Bump Stop Drop to keep the springs clear from the contacting the factory bump stop.

SWAY BAR OPTIONS

The front Sway Bar Geometry will need to be addressed with your choice of a Sway Bar Drop Bracket (more economical, maintains the factory Sway Bar End Links) or our Extended Sway Bar links – a FAR more robust option. The replacement End Links are the only option compatible with a plow bracket.

SWAY BAR DROP BRACKETS SPECIFICATIONS:
  • Corrects sway bar geometry
EXTENDED SWAY BAR LINKS SPECIFICATIONS:
  • Extended length to accommodate leveled trucks
  • 17-4 stainless steel, greasable and fully rebuildable
  • Excellent articulation
  • Only works on Carli leveling kits
  • Rebuild parts
TORSION SWAY BAR WITH LINKS SPECIFICATIONS:
  • Direct fitment to Carli leveling lifts
  • Replaces immobile factory sway bar with custom torsion bar
  • Huge ride quality improvement
  • Includes drop brackets and sway bar links
  • Rebuild parts

REAR LEAF SPRING OPTIONS

The rear can be outfitted with a replacement Full Progressive Spring Pack (reduces capacity to a “light” ¾-ton) or factory leaf-pack modifying Progressive Add-a-Pack (eliminates the factory block and maintains payload capacity; pairs with a rear bump stop drop). This is where the F250 and F350 are a bit different. Since 2008, the main spring packs on these two trucks is different; the F250 has a lighter rate spring pack than its 350 counterpart. The F250 Add-a-Pack equipped systems are a nice improvement over stock; the F350 with the Add-a-Pack is still very stiff in the rear as the main pack doesn’t move much unless loaded. Carli recommends the Full Replacement Leaf Spring packs for both trucks but especially the F350 given the super-stiff factory springs. If capacity is a concern, an aftermarket airbag system should be installed to complement the Full Progressive Leaf Springs to restore the F350 capacity. Carli recommends a system that will allow the airbags to disconnect from the lower mount during suspension cycling to ensure you’re able to take advantage of all your rear suspension travel. The Full Progressive Leaf Spring Pack will shift the axle slightly forward in the wheel well to ensure maximum tire clearance for a 37” M/T at full compression.

ADD-A-PACK SPECIFICATIONS:
  • Bilt in the USA by Deaver Leaf Spring
  • Smooth, progressive design
  • Supplied with bump stop drops, u-bolts and hardware
  • Pairs to Carli leveling lifts, provides 1/2"-1" high rear stance
  • Eliminates the factory block
  • Load capacity is maintained, ride quality is improved
  • Super-Duties equipped with a factory 3-5/8" block will require the 2" factory block (Part numbers 7C3Z-5598-L, and 7C3Z-5598-K) to achieve a level stance. Fits 3.5″ axle tube.
FULL PROGRESSIVE LEAF SPRING KIT SPECIFICATIONS:
  • Block eliminating
  • Includes new u-bolts and rear bump stop drops
  • Provides a 1/2" rear high stance to Carli leveling suspension systems
  • 37" tire fitment
  • 3.5-4.0" axle tube
HEAVY DUTY FULL PROGRESSIVE LEAF SPRING KIT SPECIFICATIONS:
  • Block eliminating
  • Designed for those with constant 1,000lbs in the bed
  • Includes new u-bolts and rear bump stop drops
  • Provides a 1" rear hight stance on matching 2.5" leveling suspension systems
  • 37" tire fitment
  • 3.5-4.0" axle tube
LEAF SPRING SHACKLES SPECIFICATIONS:

Much of the jarring ride of the Super Duty rear can be attributed to the factory vulcanized bushings in the leaf spring pack and shackle. The factory shackle is very strong BUT the design is not conducive to a smooth ride. The Carli shackle is constructed of 1/4″ American cold-rolled steel. The mid-length gusset ensures no deflection while the serviceable bushings offer a far superior ride to the bind of the factory bushings.

  • Greasable and rebuildable
  • Far better ride than factory shackle
  • 1/4" steel construction
  • Fits factory and Carli springs

WHEEL AND TIRE FITMENT

Factory Wheels SHOULD NOT be run with oversized tires. They’re known to rub the radius arm, sway bar and most concerning – Brake Lines. Factory tires and factory wheels will work without issue but Carli DOES NOT recommend running oversized tires on factory wheels. On our 2.5” Ford Systems, Carli recommends 17”-18” wheels, no more than 9” wide with 5.5” of backspacing with Carli Fabricated Radius Arms or 5” Backspace with factory arms; 5” will require a bit more trimming. Tires, 37×12.5” will fit with some trimming; 35” will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.

IMPORTANT NOTES:

  • Wheels: Carli recommends a 17"-18" wheel, no more than 9" wide with 5" - 5.5" of backspacing
  • Tires: 35", E-rated tire is recommended. Tire pressure 45psi front, 40psi rear
  • Configuration: Carli leveling systems are designed and tested on vehicles with 17"-18" wheels with 35", E-rated tires. Running stock wheels and tires or a larger wheel diameter will result in a stiffer ride.
NO LEAF SPRING OPTION NOTES:
  • Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any leaf spring provisions.
NO SWAY BAR OPTION NOTES:
  • Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any sway bar drop or Torsion Sway Bar provisions.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 81445228479

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 21 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
O
Verified Purchase
orlando toro
Los Angeles, US
★★★★★ 5
You could set up in 10 minutes right out the box.
Size: 36 Gallon, Style: Heavy Duty (2 Wheel)
Very sturdy. This brand does not come with disappointment.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2026
R
Verified Purchase
Richard
Waukegan, US
★★★★★ 5
74 monte carlo Resto
Model: NewSLS50_52
Great product easy installation with sheets cut to size,using for Classic car Restoration,floor pan and doors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
R
Verified Purchase
RTD2
West Palm Beach, US
★★★★★ 5
Impressive Sound Deadening Solution with Enhanced Audio Quality
Model: NewSLS50_52
I recently purchased the Siless 50 mil (1.3mm) 52 sqft Car Sound Deadening mat, and I am delighted with the results it has delivered. Right from the start, I was impressed with the packaging, which ensured the product arrived in perfect condition. One of the standout features of this sound deadening mat is its ease of use. It was a breeze to cut and modify according to my specific needs. Whether I needed to cover specific areas or customize the size, the mat accommodated my requirements effortlessly. This flexibility made the installation process a breeze. The Siless Sound Deadening mat has proven to be highly effective in reducing outside noise within my vehicle. With just a half cabin install, I noticed a significant reduction of approximately 10 decibels, making my driving experience much quieter and more comfortable. The mat acted as a reliable barrier against external noise, allowing me to enjoy a more peaceful ride. Furthermore, the sound quality from my vehicle's audio system experienced a noticeable improvement. The Siless mat effectively dampened vibrations and minimized resonance, resulting in cleaner and more refined audio output. The mat's thickness of 50 mil (1.3mm) ensures optimal sound absorption, contributing to its effectiveness in creating a quieter and more enjoyable driving environment. I can now appreciate the full range of tones and enjoy a more immersive music experience during my drives. Overall, I highly recommend the Siless 50 mil Car Sound Deadening mat for anyone seeking a reliable and effective solution to reduce noise and enhance audio quality in their vehicle. The easy cutting and modifying process, along with the excellent packaging, contribute to a seamless installation experience. With a significant reduction in outside noise and an improvement in sound system performance, this sound deadening mat has exceeded my expectations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2023
C
Verified Purchase
Charles H.
Fort Morgan, US
★★★★★ 5
Good quality sound deadener at a good price.
Model: NewSLS50_52
Quality sound deadening that adheres to body panels well. You can easily hear the vibration reduction after just the first piece by tapping on the body panel before and after.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 21, 2025
N
Verified Purchase
Nick Frazier
Whiting, US
★★★★★ 4
Good stuff at a good price
Model: NewSLS50_52
Works well and sticks well. I used a roller and it has been over a year and everything still sticking as good as day i put it everywhere. I didnt use any adhesive but I did wipe everything down with acetone before I applied. Good stuff at a good price
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025

recommand products