Sunlu Filadryer SP2 2in1 Filament Dryer Storage Box

Sunlu Filadryer SP2 2in1 Filament Dryer Storage BoxFeatures 2 in 1 Filament Dryer and Storage Box Combination Is there any way to handle drying and storage filament at the same time? SUNLU FilaDryer SP2, with efficient heating base and storage box, designed as two separated parts. Multiple storage boxes can be used as storage boxes can be freely stacked (maximum stacking of 3 is recommended) to enhance space utilisation. Strong Sealing The top cover and sealing bottom cover are designed with silicone,

Features

• 2-in-1 Filament Dryer and Storage Box Combination

Is there any way to handle drying and storage filament at the same time? SUNLU FilaDryer SP2, with efficient heating base and storage box, designed as two separated parts. Multiple storage boxes can be used as storage boxes can be freely stacked (maximum stacking of 3 is recommended) to enhance space utilisation.

• Strong Sealing 

The top cover and sealing bottom cover are designed with silicone, which has a good sealing effect. Whether used as a filament dryer or as a storage box, it has very good thermal insulation. When used as a storage box, it has been measured that under an average ambient humidity of about 50%, an average of about 25% humidity can be maintained inside.

• Large Internal Space and Spool Compatibility

Internal compatibility with 0.25~3kg spools, even paper spool can also be realised by fixing the spool roller. The storage box  compartment can hold two rolls of 1kg filaments, one roll of 2kg (2 rolls of 2kg filaments for SUNLU), and 3kg filaments, and supports a maximum spool diameter of 250mm and a maximum spool width of 153mm. it is compatible with both 1.75mm and 2.85mm diameter filament. Even damaged spools can be fixed with the spool roller.

• Humanised Design

The storage box part adopts the detail design of carrying handle + bottom depression, which is convenient for users to move. In addition, the storage box is equipped with an independent hygrometer for real-time observation of internal humidity changes, and 3 cable outlet holes on each side of the box to meet the printing needs of different sizes of filaments.

• Strong Safety, Stress-free

Use The triple safety design of 200W PTC + fan heating, secondary temperature protection switch and software intelligent temperature control ensures the heating process is foolproof.

FilaDryer SP2 | 2-in-1 Filament Dryer

Ideal for both 3D printing professionals and hobbyists, it offers unmatched convenience, functionality, and space - saving.
It is revolutionary in filament handling. Its split modular design combines 3D filament drying and 3D filament storage. Advanced drying tech removes moisture efficiently, while the storage function keeps filaments in good condition. This 2-in-1 setup streamlines workflow, eliminating the need for separate drying and storage.
Besides, its stackability allows for easy stacking of multiple units, saving space and optimising workspace layout, whether in a small workshop or a large industrial facility.

It features a carrying handle and bottom depression for easy moving. The storage box includes an independent hygrometer for real-time humidity monitoring and 3 cable outlet holes on each side to accommodate printing needs for various filament sizes.

SP2 FilaDryer gives full consideration to the safety of users. The triple safety design of 200W PTC + fan heating, secondary temperature protection switch and software intelligent temperature control ensures the heating process is foolproof.

SP2 has superb adaptability to most universal filaments on the market. Its working temperature range: 35°C-70°C. It can be compatible with 99% of general filaments and some functional filaments like: PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC etc.

Specifications

• Product Name: SUNLU Filament Dryer SP2 / Storage Box Set
• Product Dimentsions: 278mm×208mm×396mm(LWH)
• Internal Dimentsions: 265mm×193mm×274mm(LWH)
• Package Size: 337mm×263mm×380mm(LWH)
• N.W.: FilaDryer SP2 Set: 3.6KG, Storage Box Set: 5.0KG
• G.W.: FilaDryer SP2 Set: 4.1KG, Storage Box Set: 5.5KG
• Operating Environment: Temperature: 10°C-35°C, Relative Humidity: ≤95%
• Compatible Filament Diameters: Φ1.75mm/Φ2.85mm
• Maximum Spool Size: Φ250mm×153mm(1kg×2 or 2kg×1 or 3kg×1)
• Work Temperature Range: 35°C-70°C (PLA, PLA+, PETG, ABS, TPU, PVA, PVB, ASA, PA/PC etc.)
• Humidity Display Range: Refer to the Hygrometer:10%-90%
• Time Setting Range: 0-99h
• Power Input Specifications(Ensure the voltage matches yourlocal supply before use): AC 110V 60Hz 0r AC 220V 50Hz
• Maximum Operating Current: 2.2A@230V, 4.2A@120V
• Maximum Working Power: 250w
• Stand by Power: ≤1W

Includes

• 1x Storage Box
• 1x Heating Base
• 1x Hygrometer
• 1x Dessicant
• 1x Dessicant Box
• 1x Power Cable
• 1x Spool Roller
• 2x Air Lock
• 2x PTFE Tube 8cm
• 2x PTFE Tube 1m
• 1x User Manual

Browse more

• Browse all Filament Dryers
• Browse all Sunlu