Pay in installments of $37.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 29 - Sep 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
HUBB Reusable Oil Filter 11-24 6.7L Ford PowerstrokeA HUBB Oil Filter will be the last oil filter you will ever buy. They are made of the highest quality materials and are simply manufactured to a higher standard. They also carry a 100,000 mile warranty. Typical filters use a bypass valve that allows unfiltered oil back into your engine. This is a feature to help the oil flow to ensure lubrication at all times when it is cold and or a heavier weighted grade. The issue with that is that the oil flowing
A HUBB Oil Filter will be the last oil filter you will ever buy. They are made of the highest quality materials and are simply manufactured to a higher standard. They also carry a 100,000 mile warranty.Typical filters use a bypass valve that allows unfiltered oil back into your engine. This is a feature to help the oil flow to ensure lubrication at all times when it is cold and or a heavier weighted grade. The issue with that is that the oil flowing through the bypass valve is picking up all of the contaminants and re-introducing them into your engine. The effects can be devastating to your engine.
THE HUBB DIFFERENCE:
HUBB Filters continues to filter oil even while operating in bypass mode by using the integrated secondary filtration system. HUBB Oil Filters are also beta tested. The beta ratio is a test of an oil filters efficiency. The HUBB Oil Filters have a beta ratio of 75, which means that the filters are a consistent 98.666%, that is a very good rating for a re-usable oil filter.
How easy is the filter to install?
It takes about ten minutes to install the filter in a driveway or just a few minutes on a lift. It's as simple as if you can screw in a light bulb you can install this filter.
Can I clean and maintain the filter myself?
Yes, you can definitely clean the oil filter yourself using brake cleaner and a little elbow grease, however, in order to maintain the 100,000 mile warranty, HUBB requires the filters to be cleaned using an Ultrasonic Cleaner, available separately. HUBB Oil Filter recommends removal and cleaning of the filter every 3000 miles.
FEATURES & BENEFITS:
- Filter-in-a-filter design that is 99% efficient at removing oil contaminants at 25 microns (versus 52% for conventional filters)
- Two pressure differential valves for increased oil flow and engine safety
- Filter is made of surgical stainless 316L weave and is cased with a hardened aluminum shell.
- All internal parts are easy to clean and re-usable
- Entire filter is completely recyclable – no waste
- Filter can be drained 100% of oil – does not capture and hold oil in filter like paper filters (approximately 5 ounces per filter)
- Improve oil flow by up to 5 times, when compared to conventional filters, to reduce engine friction
- Produce an oil flow rate of up to 50 gallons/minute, compared to 10-12 gallons/minute for conventional filters
- Require only .2 PSI/gallon to push oil flow, compared to 7 PSI/gallon for conventional filters
- Increase contaminant storage capacity by 5 times, but do not accumulate unrecyclable oil like conventional filters
- Reduce carbon monoxide emissions by up to 30% and nitric oxide emissions by up to 16%
- Double your standard oil change interval reducing oil costs by 50% or more
- Ability to have Hubb clean the filters and manage your filter core inventory for you
- Hubb oil consultants will test your virgin and used oil to assure you are maximizing your oil life between changes and using the best oil for your application.
- 100,000 Mile or 5,000 Hour Performance Guarantee
- Includes filter tool
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.8 ★★★★★
Based on 30 reviews
Sort
Product Reviews
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors.
I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles.
First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out.
Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off.
Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on.
The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
★★★★★ 5
Bringing a 1976 MG Midget to the modern world!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
I've been restoring a 1976 MG Midget barn find. I bought some Sinless liner to help make the car rattle less and feel more solid.
This product is easy to cut, easy to install, and extremely sticky. I used it to line the trunk, the interior, and even some under the hood of the old MG. The adhesive stands up to the brutal temperature of the engine bay, and when (by accident) some fuel spilled onto the foam, it didn't fall apart or turn to mush.
Thanks to Siless, the MG now feels like a modern car. The floor pans feel much more solid, the doors make a heftier thud when you close them, and the trunk no longer sounds like a percussion instrument when you touch it.
If you know what you're doing, this product will transform the feel of a car. I found that 36 sq ft was enough for my MG Midget, but for a bigger car I would want more. The pattern on the back helped me to cut perfectly measured squares and rectangles. The foam itself doesn't have a strong odor, it works super well, and has held up to several months of changing temperatures (in the Midwest US.)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 11, 2025
★★★★★ 5
Excellent Car Sound Deadening and Heat Insulation Solution
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
If you're looking for a high-quality car sound deadening and heat insulation material, then the Siless Liner 157 (4 mm) mil 36 sqft is definitely worth considering. This product is designed to offer superior noise reduction and heat insulation for your car, making your driving experience more comfortable and enjoyable.
The closed-cell foam material used in this product is of premium quality, and it effectively blocks out external noise and vibrations. This means you can enjoy a quieter and more peaceful ride, even on noisy roads. In addition, the Siless Liner 157 also provides excellent heat insulation, which can help keep your car cooler in hot weather.
One of the best things about this product is that it's very easy to install. You don't need any special tools or equipment, and the material can be easily cut to fit any shape or size. It's also very lightweight and flexible, which makes it easy to work with.
Overall, the Siless Liner 157 (4 mm) mil 36 sqft Car Sound Deadening Closed Cell Foam & Heat Insulation mat is an excellent choice for anyone looking to improve the comfort and performance of their car. It's a high-quality product that delivers on its promises, and it's definitely worth the investment.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2023
★★★★★ 4
Heavy-Duty That Works!
Material Type: 157mil Closed Cell Foam, Style: 157 mil 36 SqFt
This extreme sound deadening mat performs well for reducing road noise and vibration. It feels dense and adheres securely when properly applied. Once installed, it noticeably improves interior quietness.
Overall, it’s a strong choice for more serious sound insulation projects.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026