Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Kwik-Way SVSII Deluxe Valve RefacerKwik Way SVSIID Valve Refacer EXCLUSIVE SIX BALL CHUCK DESIGN Every Kwik Way SVS II is equipped with an air activated, self aligning six ball chuck that is accurate to within . 0005 (. 0002" with High Performance Chuck). Six Ball alignment for perfect grinding Every Kwik Way chuck features two sets of balls 3 to a set which grip the valve stem on that part which travels in the valve guide. Independent studies have concluded that the Kwik Way
Kwik-Way SVSIID Valve Refacer
EXCLUSIVE SIX-BALL CHUCK DESIGN
Every Kwik-Way SVS II is equipped with an air activated, self-aligning six-ball chuck that is accurate to within .0005” (.0002" with High Performance Chuck).
Six-Ball alignment for perfect grinding
Every Kwik-Way chuck features two sets of balls - 3 to a set - which grip the valve stem on that part which travels in the valve guide. Independent studies have concluded that the Kwik-Way Centerline System grinds valves with greater accuracy than other collet, conical-centering or centerless chuck design machines.
The Kwik-Way Principle: CENTERLINE
The Kwik-Way “Centerline System” is the only way to correct and align valve faces to that portion of the valve stem operating in the guide. Unless a valve is scientifically aligned, the valve face will be ground eccentric to its true center. A new valve is true and mechanically accurate in all its proportions. The valve face and stem are concentric with the same centerline.
Warping occurs only in that part of the valve that is subject to extreme heat - the portion above the guide and in the valve head. To correct a warped valve so it will function properly when replaced in the engine, the valve face must be restored to concentricity with the portion of the stem that operates in the guide. The “Centerline System” assures this alignment and accuracy.
SUPERIOR FINISH: Kwik-Way’s separate, belt driven spindle isolates any motor vibration or harmonics to provide a smooth “chatter free” finish. Kwik-Way offers a wide variety of grinding wheels to fit your specific needs from general purpose to specialty applications such as titanium and hard alloy valves. The variable speed chuck and precise spindle speed meet the grinding requirements of the wide range of materials and valve diameters used in today’s engines to assure superior finish.
IMPRESSIVE SPEED: The chuck is air-activated to open quickly to its full diameter at the touch of a button, Operators can work through a wide range of valve sizes without stopping to change collets. Stem end grinding, chamfering and rocker arm grinding features are all standard. Other machines may require you to grind the valve stem prior to refacing the valve. This is not required with the exclusive Kwik-Way Six-Ball Chuck. Dressing the wheel is extremely fast. The diamond dressing tool pivots out of the way when not in use.
SOLID WARRANTY: If you are looking for a valve refacer that could easily be your last, the Kwik-Way Valve Refacer is your solution. Kwik-Way is so confident this machine is built to last, it comes with a Three Year Warranty. The Kwik-Way SVS II Deluxe is designed to be your long-term machine for speed and accuracy.
- Air-Operated, Six-Ball chuck accurate to within .0005""
- Variable speed chuck - 100-300 RPM
- Standard Capacity: .157" - .5625" (4.0 - 14.3mm) Optional chuck up to .8268" (21mm)
- Valve Head Diameter Capacity: .750" - 4.0" (19mm - 101.6mm)
- Adjustable grinding head
- Micrometer feed
- Superior visibility
- 7" (178mm) valve face grinding wheel
- Valve angles from 13 - 62 degrees
- Rocker arm attachment standard
- Three year warranty
| Minimum Chuck Capacity (Standard / High Perf) | .157” (4.0 mm) |
| Maximum Chuck Capacity (Standard / High Perf) | .5625” (14.3 mm) (up tp 21mm w/ optional chuck) |
| Valve Head Diameter Capacity | .750” – 4” (19.015 - 101.6 mm) |
| Minimum Valve Stem Length | 1.900” (49mm) |
| Minimum Total Valve Length | 3.375” (85.73 mm) |
| Valve Wheel Diameter | 7” (178 mm) |
| Surface Wheel Diameter | 3” (76 mm) |
| Spindle Drive Motor | ½ HP |
| Chuck Drive Motor | Gear Drive 1/12 HP |
| Coolant Capacity | 1 Gallon (3.8L) |
| Valve Wheel RPM/SFPM | 3450 RPM / 6322 SFPM |
| Stem Sheel RPM/SFPM | 3450 RPM / 2708 SFPM |
| Chuck Speed | Variable Speed: 100 – 300 RPM |
| Minimum Air Requirement | 65 PSI |
| Overall Length | 37” (940 mm) |
| Overall Width | 22” (599 mm) |
| Overall Height | 16” (406 mm) |
| Height on (optional) Cabinet | 51” (1295 mm) |
| Shipping Weight | 330 ilbs. (150 kg) |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy