Pay in installments of $43.74 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 4 - Aug 9
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Fits Ford F-150 2WD (2009-2013) N3 Leveling Struts; 2"; Loaded Strut; 501073_A2 Inch Leveling Kit Loaded Strut Ford F 150 2WD (2009 2013) Level your vehicle from front to rear while preserving the smooth, factory ride quality with Rough Country's N3 Strut Leveling Kit! This easy to install kit boosts the front end, removing the unsightly factory rake and giving your truck increased ground clearance and aggressive good looks. Rough Country's N3 Struts feature a massive bore and chrome plated piston rod with leak proof piston
2 Inch Leveling Kit - Loaded Strut - Ford F-150 2WD (2009-2013)
Level your vehicle from front to rear while preserving the smooth, factory ride quality with Rough Country's N3 Strut Leveling Kit! This easy-to-install kit boosts the front end, removing the unsightly factory rake and giving your truck increased ground clearance and aggressive good looks.Rough Country's N3 Struts feature a massive bore and chrome plated piston rod with leak-proof piston seal for exceptional durability during off-road use. Each strut is tuned to OEM specs and includes a variable dampening system for outstanding handling and control on all road conditions. These struts offer improved tire contact with the road for increased stability and performance. Each lifted strut is a full replacement of your OEM equipment, engineered for a pain-free installation. Simply remove the factory strut and replace for an instant upgrade! No complicated strut disassembly required!
Features:
- Easy bolt-on installation
- Offers improved tire contact with the road for increased stability and performance
- Infinitely Variable Damping
- Leak-proof piston seal
- Special formulated low friction shock oil
- Massive 1 3/8in Bore
- Hardened chromed piston rod provides superior corrosion resistance and enhances sealing properties
- 3 year limited warranty
- Includes pre-loaded coil
- No strut disassembly required
- Maintains smooth, factory-like ride
- Increased ground clearance
- Application specific velocity sensitive valving
- Structurally engineered for lifted applications
- Levels the front of the vehicle by 2-inches, eliminating the need for strut spacers
- Nitrogen gas charged to improve ride, handling, and reduce shock oil aeration
Application:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2010-2013 | Ford | F-150 | FX2 |
| 2009-2013 | Ford | F-150 | King Ranch |
| 2009-2013 | Ford | F-150 | Lariat |
| 2013-2013 | Ford | F-150 | Limited |
| 2009-2013 | Ford | F-150 | Platinum |
| 2009-2013 | Ford | F-150 | STX |
| 2009-2013 | Ford | F-150 | XL |
| 2009-2013 | Ford | F-150 | XLT |
| 2010-2012 | Ford | F-150 | Harley-Davidson Edition |
| 2011-2011 | Ford | F-150 | Lariat Limited |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Good value, well made, easy assembly.
Size: 13"-32", Style: Single
Well made, easy assembly, very versatile and cable management included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much.
So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great.
But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole.
To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better.
Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022
★★★★★ 5
27" monitor mounted easily
Style: Single Arm, Size: 13"-34", Style: Single Arm, Size: 13"-34"
I ended up getting 2 of these monitor arms for the different desks in our office, and I am happy with both of them. The arms are super easy to assemble and adjust to the tension one desires. The arms hold the position where one sets them too, and the gas pistons make it super easy to use.
Each arm has a channel on the bottom that allows the wiring to be ran through and hidden, yet remaining accessible if needed. The mounting clamps hold securely and there is no wiggle whatsoever, and it is nice to have a strong feeling monitor mount.
It is lightweight and compact so it doesn't feel clunky on the desk. Highly adjustable left to right, up and down, and the screen forward and backward tilt. The price is really good for the overall value and quality of the product. Just make sure to order the right mounting arm depending on the size of your monitor, and you will be fine.
Nice quality and feel, and the aesthetics are great too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Get this one!
Style: Dual Arms, Size: 13"-32", Style: Dual Arms, Size: 13"-32"
I got this dual monitor arm for my home office, and it’s been a total game changer. Having a dual monitor setup makes multitasking so much easier, especially for photo and video editing.
Setup was incredibly quick (under 5 minutes), and it feels very secure once mounted. I really like how stable it is and how easy it is to adjust the height and angle.
It also helped clear up a lot of desk space since I no longer need bulky monitor stands. Simple design, but it works perfectly. Highly recommend for both single and dual monitor setups. Great value for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026
★★★★★ 5
Pretty great product
Style: Dual Arms, Size: 17"-33"
Stand works great and as expected. I have a 32” monitor on one and a 26” ultra wide in the vertical position on the other.
I’ve had them for a few months and they’ve held tension perfectly. Usually, I find these spring tension arms to become loose after a few months and you just tighten them back up, these are still stiff like when I first set them up, and I move them around quite often. The monitors can rotate 360 degrees and tilt up and down almost 90 degrees each way.
The clamp is sturdy so you will feel comfortable making sure it’s tight on the desk. I do plan on drilling a hole to mount the desk to mount it without a clamp and will update my review when I do so. It comes with the hardware to do either mounting options.
They're made entirely of metal except for the plastic cable trays that clip along the bottom of the arms. The entire build is well worth the cost and gives me more space on my desk and helps my workflow when editing photos or editing video.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
recommand products
Wheel Bearing Kit 835964M91 for Massey Ferguson TE20 TEA20 TED20 TEF20 35 65 Tractors
54.31
Brake Master Cylinder 47201-0C070 for Toyota Sequoia & Tundra 2008-2022
65.69
Oil Cooler 21606-JD31A 19132 for 2013-2021 Nissan NV
89.99
Front Left Door Lock Actuator 6RD837015A 5K1837015E for Volkswagen Jetta Passat Beetle Caddy Golf Seat
23.95
Ignition Coil 22433-AA602 for 2011-2014 Subaru Impreza Forester Legacy Outback WRX STI
68.95