SKU: 60281434607

Fits 1998-2002 Chevrolet Camaro Holley Pump Module System-Single 340 Lph 12-362

Sale price$247.48 Regular price$274.98
Save 10%

Pay in installments of $68.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 1 - Sep 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Fits 1998-2002 Chevrolet Camaro Holley Pump Module System-Single 340 Lph 12-362Fits 1998 2002 Camaro Firebird Single 340 LPH Pump Module If you are looking to make some serious power with your 1998 2002 4th Gen F body, the Holley modules feature billet pump flanges that connect to either single or dual 340 or 450 LPH pumps. All four of these options are compatible with gasoline and E85 and come pre installed with new level and tank pressure sensors as well as provisions to connect to the factory EVAP system for EPA compliance.

Fits 1998-2002 Camaro / Firebird - Single 340 LPH Pump Module

If you are looking to make some serious power with your 1998-2002 4th Gen F-body, the Holley modules feature billet pump flanges that connect to either single or dual 340 or 450 LPH pumps. All four of these options are compatible with gasoline and E85 and come pre-installed with new level and tank pressure sensors as well as provisions to connect to the factory EVAP system for EPA compliance.

NOTES: Drive the vehicle until the level in the tank is at or below 1/8 of a tank. To make tank removal and reinstall as easy as possible, the lower the fuel level the better.

Features:

  • Anodized and laser-etched billet 6061-T6 flange with 6AN ORB ports for feed, return, and vent
  • All SKUs compatible with Gasoline AND E85
  • Comes pre-installed with new pre-calibrated fuel level and tank pressure sensors
  • Includes new gasket to complete installation
  • 3 x 11-inch HydraMat is included for each pump
  • Fits factory plastic tank used in LS1 98-02 Camaro / Firebird or an earlier 4th Gen F-body with fuel tank upgrade
  • Fittings included allowing connection to the factory 3/8 quick connect feed and return lines
  • Flanges have been designed to be compatible with feed and return line sizes up to -8AN
  • Step-down butt connectors included to wire level sensor
  • Can be connected to factory EVAP system (w/ use of 12-874 and 935056ERL - sold separately)
  • Kit includes vehicle pigtail harness - All connectors used are DTM style

Specs:

Average Current Draw 14.5Ampere
Average Flow Rating 340Liters per Hour
Brand Holley
Connector Color Gray
Connector Gender Female
Connector Quantity 1
Emission Code 5
Finish Anodized Black
Free Flow GPH 108
Free Flow LPH 410
Fuel Filter Included Yes
Fuel Sending Unit Included Yes
Fuel System EFI
Fuel Tank Pressure Sensor Included No
Fuel Type Gasoline/E85 Compatible
Gasket Or Seal Included Yes
Gasket Or Seal Material Rubber
Grade Type Performance
Height Standard
Housing Material Aluminum
In Tank or External In Tank
Inlet Quantity One
Inlet Size 6 AN ORB
Inlet Type 6 AN ORB
Internal Or External Strainer External
Lock Ring Included No
Material Billet Alluminum 6061-T6
Maximum Pressure 60Pounds per Square Inch
Mounting Hardware Included Yes
Negative Ground Yes
Outlet Quantity One
Outlet Size 6 AN ORB
Outlet Type 6 AN ORB
Product Type Fuel Pump Module
Pump Type Electric
Regulator Included No
Resistance Ohms Empty 33Ohm
Resistance Ohms Full 240Ohm
Single Or Dual Pump Single
Universal Or Specific Fit Specific
Voltage 12Volts DC
Warranty Limited 90 Day
Wire Quantity 4

Application:

Year Make Model Submodel
1998-2002 Chevrolet Camaro Base
1998-2002 Chevrolet Camaro Z28
1998-2002 Chevrolet Camaro Z28 SS
1998-2002 Pontiac Firebird Base
1998-2002 Pontiac Firebird Formula
1998-2002 Pontiac Firebird Trans Am
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 60281434607

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
sleepywan
Whiting, US
★★★★★ 3
OK for the price, but overall comfort is avergae
Size: 934-Z, Color: Mustard
Easy to put together, color (mustard) accurate to images, and while I understand this is not a high-end chair, I feel like it still needs to be rated for its quality. Pros: the seat cushions are fairly comfortable and it rolls well. Adjustable footrest is easy enough and mostly sturdy. Cons: For a tall office chair, it doesn't go up high enough. I actually had to lower my standing desk to sit at it, which then isn't where I want it when I'm standing now. It's also a bit wobbly. The seat area's attachment to the post isn't as solid as it should be for a tall chair, so while sitting, it does tend to lean/slope forward and wobble side to side. The lumbar support is not adjustable, so I'm not even really sure what it does. And the armrests are not very comfortable to use. Since they are hard plastic, they are just a bit too rigid to rely on for any comfort. They are basically there to hold on to when you're getting out of the chair.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
M
Verified Purchase
Mel
Lowell, US
★★★★★ 4
Good Value for a Tall Chair
Size: 934W-Z, Color: White
I have received this chair just today and would like to give my first impressions of it. Height is super adjustable as well as the foot rest. My desk is very tall (~34 inches vs standard ~29 inches) and does not suit a standard height chair. This chair's height is enough to sit comfortably at mybut also still having adjustment to be even higher. Lumbar support is a manual adjustment that can be adjusted by sliding the lumbar piece up or down and it seems it can be tiled as well. No reclining feature or slight backrest tilt adjustment. I'm used to my chairs reclining so it feels a little awkward siting in a flat base and straight backrest. I feel like I'm sitting too forward or leaning forward slightly but is probably something I can get use to. Easy to put together and feels very sturdy. Plastic parts of chair are made from a really sturdy plastic, like playhouse plastic materials. Wheels roll around carpet easily. Mesh seems to be a strong material, though the mesh feels kind itchy on bare skin. Overall, I think this is a good chair to get if you're needing a tall chair for a good value and can sacrifice no backrest tilt.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 3, 2025
T
Verified Purchase
Tram
Whiting, US
★★★★★ 5
Excellent value for money!
Size: 934W-Z, Color: Black, Size: 934W-Z, Color: Black
I absolutely love this office chair! I needed a chair that could support my standing desk without sacrificing comfort, and this one completely exceeded my expectations. It's incredibly sturdy and durable, well-made, and the height adjustment is super convenient, making it easy to find the perfect fit. Even during long hours of work, the seat is comfortable, and the ergonomic design effectively reduces pressure on my back and legs. I love its clean, modern look—it fits my home office perfectly. Assembly was quick and easy, and for this price, the quality is absolutely fantastic!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 24, 2026
L
Verified Purchase
Lisa Bjornstad
Bozeman, US
★★★★★ 5
Perfect chair!
Size: 934-Z, Color: Blue, Size: 934-Z, Color: Blue
I have an adjustable-height desk (also purchased from Amazon) and needed a drafting chair for those times when my body gets tired of standing. This chair fits the bill and then some! I put it together myself; it took me about an hour, but would take me about half that next time, since now I know what to do (and what NOT to do!). All the parts were there; there are even spare parts (see photo). All the holes were drilled in exactly the right places, too, which isn't always the case when I buy things from Amazon (my standing desk is a great example). The chair fits me; I'm short (5'3.5"), and often the seats of furniture are too deep for me to rest my feet flat on the floor. The depth of the seat on this chair is just a little over 18 inches, and with the adjustable footrest ring, it's perfect. I don't think a tall or heavy person would fit in it, to be honest. But it's perfect for those of us who are vertically challenged. I love that it glides easily on my hardwood floors and that it turns 360 degrees. The chair comes in numerous luscious colors, so take your pick! It is very sturdy, has good lumbar support, and the seat and seat back are very comfortable. And the arms flip up, which was an absolute must when I was shopping for this chair. I got it on sale, too -- $109.00 -- and I'm delighted with this purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
P
Verified Purchase
PenLady
Omaha, US
★★★★★ 5
Excellent adjustable drafting chair
Size: 934-Z, Color: Blue
Excellent chair design, extremely comfortable and exceptionally easy instructions to follow making for simple assembly. Love the amply wide cushioned seat and ergonomic backrest. The height adjustment feature works perfectly as well as positioning of the foot ring . Having the ability to raise the arms is also a big plus! I highly recommend this product for attractive appearance, comfort features, functionality and operation. Really nice chair!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2026

recommand products