7.0 inch 1080P 208X LCD USB Video Microscope Digital Camera

7.0 Inch LCD Screen + 1080P USB Video Microscope Phone Welding Continuous Magnification Magnifier Tool. 7.0 Inch LCD Digital USB Microscope 1000X Endoscope Recording Zoom TF Storage Video Recorder For Watch Repair Mobile Phone Soldering Motherboard.

Technical Specifications:
Screen size: 7.0 Inch / 5.0 Inch / 4.3 Inch
Screen resolution: 800x480 480x272 480x272
Image sensor: 1/4 inch (BSI)
Pixel size: 2um x 2um
Image resolution: 2592x1944(5M)、3264x2448(8M)、4032x3024（12M）etc
Video resolution: 1080P、720P、VGA
USB resolution: 720P30、VGAP30
Zoom rate: 15X～208X ( Optical 15X~52X, Digital 1X～4X )
Language: English, Simplified Chinese, Traditional Chinese
White LED: Built-in 6 LEDs
5V Output interface: USB-A, can output DC 5V power
IR Remote: Max 5 meters
USB interface: TYPE-C USB2.0
TF card slot: Max support 64 G TF card
Working distance: 1cm~5m
Device size: 174mm（L）x 129mm（W）x 51mm（H）
Device weight: 350（With battery）/ 305（Without battery）

Packaging & Accessories:
Video Microscope 1pcs
Power Adaptor 1pcs
USB Cable 1pcs
IR Remoter 1pcs
Base Bracket 1 set
User Manual 1pcs
Cleaning Cloth 1pcs
 

Assemble the bracket to lock and fix the microscope

Insert TF card

Install battery or connect to power.

a.Assemble the base bracket and fix it on the bracket platform;

b.TF card gold finger pointing up, insert TF card slot;

c.Plug the battery into the battery compartment or connect to power by USB;

d.Adjust the video microscope screen to a comfortable viewing angle;

 

Attention: Use a Phillips screwdriver to remove and assemble the battery cover;

Please use 18650 battery with protective plate or original battery;

Please pay attention to the positive and negative electrodes of the battery, don’t assemble them converse;

 

Connect USB power

Connect power adaptor with AC

a.Plug USB cable into the USB interface of this video microscope;

b.Put another side of the USB cable into the USB interface of the power adaptor;

c.Connect power adaptor with AC;

3.Power on/off 

Long press power button to power on

Long press power button again to power off

a.Long press power button, video microscope will turn on, power light will be on to enter preview mode;

b.Use center point of monitor to aim the object, adjust bracket height and lens focal length to make image clear;

c.Long press power button again to power off video microscope;

 

Attention: In order to reach the best effect, please clean protective lens and display screen before using.

 

Zoom in / out function: Press left button to zoom out, press right button to zoom in;

Photo/Video: Press Confirm button can take photo/video;

Menu function: Press Menu button, get into menu for setting of photo、video、playback、system etc parameters setting;

White LED brightness: Short press Power button to display OSD, adjust the white LED brightness by Left button and Right button;

Mode switch:Long press Menu button, can switch photo,video,playback mode;

USB mode: Insert USB cable, can choose U disk model、camera mode,working mode.

 

For more details, please check Function and Menu Introduction section.