Pay in installments of $11.23 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 3 - Aug 8
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek F405-VTOL Flight ControllerSpecifications MCU: STM32F405RGT6, 168MHz , 1MB Flash IMU: ICM42688 P Baro: SPL06 001 OSD: AT7456E Blackbox: MicroSD card slot 6x UARTs, 1x Softserial_Tx option(INAV) 12x PWM outputs 1x I2C 4x ADC (VBAT, Current, RSSI, Airspeed) 1x spare PINIO USB Beep Extender with Type C(USB2. 0) Built in inverter on UART2 RX for SBUS input Switchable Dual Camera Input FC Firmware ArduPilot: MatekF405 TE INAV: MATEKF405TE_SD (INAV 5. 0 or newer) PDB Input voltage
Specifications
- MCU: STM32F405RGT6, 168MHz , 1MB Flash
- IMU: ICM42688-P
- Baro: SPL06-001
- OSD: AT7456E
- Blackbox: MicroSD card slot
- 6x UARTs, 1x Softserial_Tx option(INAV)
- 12x PWM outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- 1x spare PINIO
- USB/Beep Extender with Type-C(USB2.0)
- Built in inverter on UART2-RX for SBUS input
- Switchable Dual Camera Input
FC Firmware
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE_SD (INAV 5.0 or newer)
PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- Sense resistor: 100A continuous, 220A peak
- 5x ESC power pads, total 100A continuous
- Support continuous load of up to 100A on ESC pad near the current sensor resistor
- Support continuous load of up to 30A & peak of 50A on each ESC pad of Quadcopter
- Battery Voltage divider 1K:20K (Scale 2100 in INAV, BATT_VOLT_MULT 21.0 in ArduPilot)
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, 10A Peak
- for stable Vx output, input voltage should > Vx voltage +1V
BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 25 x 25mm-Φ2mm, 35 x 35mm- Φ4mm
- Dimensions: 45 x 42 x 15mm
- Weight: 25g w/ USB/buzzer adapter
Included
- 1x F405-VTOL
- 1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
- 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
- 1x Rubycon ZLH 35V 470uF capacitor
- Dupont 2.54 pins (Board is shipped unsoldered)
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 22 reviews
Sort
Product Reviews
★★★★★ 5
Worth the investment! It lasts!!
Color: Medium, Color: Medium
I have been using this religiously as my foundation for over a year! I love it. It works best for me when I use moistuzer, let it dry enough so you have a little slip. A LITTLE goes a long way and double check the bottle because even when it feels empty it’s not fully empty :) it’s not a full coverage approach to foundation I use an elf glo setting over it in winter . It’s light weight and the SPF was what I was looking for!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
Expensive, but a good product!
Color: Fair
Love this product. Comes out of the tube white but changes color as you apply. I find you do need moisturizer on your face to get a smoother application - I tend to mix it with my moisturizer before applying and it works well. Am currently on my 3rd tube of the stuff. A bit pricey, but for my skin it sits better than most other products I've tried and doesn't make me break out or look shiny.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 5
the perfect everyday tinted sunscreen! worth the $$
Color: Light, Color: Light
this product was highly recommended to me by my esthetician. I was hesitant to try it because of the price point, but once I learned I could use my HSA funds I immediately purchased! the product is not overly greasy or oily- it gives a beautiful glow. I would recommend setting with a setting spray or powder for longevity.
the coverage is buildable, but won't be a fix-all for someone desiring full coverage- as an acne girly, I am satisfied with this product while paired with a few dabs of my concealer. it works well with other colorescience products AND with my other everyday makeup products which was a huge plus for me. it doesn't feel heavy on the skin either which was also a huge selling point for me as someone who needs coverage but hates the feeling of a full face.
all in all, I think the product is absolutely worth the money regardless of it being HSA approved or not. I would recommend to anyone who loves wearing makeup but also is looking for something light and effortless.
one note about the shade- I have fair olive skin but tan easily, so I got the shade "light" -but I might try the shade "fair" next time as this shade pulls slightly orange on me. the shade matching can be difficult, but I think that's to be expected with a color changing product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
★★★★★ 4
Looks great on my 67 skin!
Color: Medium
Covers well. I love the color. I bought the medium and tan to cover all seasons. I will mix them as needed. It is sticky all day but it looks great so I'll deal with the sticky! I've tried sooo many tinted high SPF moisturizers and I've finally found one that really looks good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026
★★★★★ 5
work well
Color: Light
I recently switched to this mineral sunscreen after having irritation and redness from several chemical sunscreens, and it has made a big difference for me. My skin is sensitive, but this one feels gentle and comfortable without causing burning or itching. It gives me good protection and doesn’t leave my skin feeling worse by the end of the day. Definitely a better option for sensitive skin.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026