SKU: 45320154075

Cho Pat Patella (Knee Cap) Stabiliser

$54.45 $60.50
Save 10%
No.2 Bestseller on salfueradeti.es >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Cho Pat Patella (Knee Cap) StabiliserThe Cho Pat Patella (Knee Cap) Stabiliser allows for full mobility of the knee joint while improving lateral and medial support for weak and arthritic knees. The kneecap stabiliser improves patellar tracking resulting in less knee degeneration, inflammation, and pain. Used for: Some forms of arthritis Overuse syndrome Relief of acute and chroic pain associated with patellar tendonitis and off tracking Total Kneecap Support Applies pressure above,

The Cho Pat Patella (Knee Cap) Stabiliser allows for full mobility of the knee joint while improving lateral and medial support for weak and arthritic knees.  The kneecap stabiliser improves patellar tracking resulting in less knee degeneration, inflammation, and pain.

Used for:

·         Some forms of arthritis

·         Overuse syndrome

·         Relief of acute and chroic pain associated with patellar tendonitis and off-tracking

Total Kneecap Support

·         Applies pressure above, below, and on each side of the kneecap

·         Extra strong straps apply enhanced pressure while allowing mobility

·         No slip Velco® brand ensures kneecap stabilizer will not loosen

Enhanced Fit and Comfort

·         Left and right sized versions for maximum comfort and performance

·         Open kneecap for added ventilation

The Cho-Pat Patellar Stabilizer is constructed in the USA from comfortable fabric-covered neoprene and provides effective relief from acute and chronic pain associated with patellar tendonitis, arthritis, and overuse syndromes.  The kneecap stabilizer functions dynamically because it applies constant pressure to the knee joint.  The patellar stabilizer has four enclosed firm plastic tubes that act as buttresses around the kneecap to reduce patellar subluxation and degeneration.

People can experience knee pain for a number of reasons including: patellar tendonitis, arthritis, overuse, jumper’s knee, runner’s knee, and weak knees.  Patellar tendonitis affects the tendon that connects the shinbone to the kneecap.  Patellar tendonitis symptoms begin with pain located in the section of the patellar tendon between the kneecap and the area where the tendon attaches to the shinbone (tibia).  It is a painful condition often caused by overuse or poor mechanics that can make it difficult to participate in daily and athletic activities and can be helped significantly by a kneecap stabilizer.

 Measuring Instructions:
Measure Circumference at Mid-Kneecap
CHOOSE LEFT OR RIGHT KNEE
Note: If you are between sizes, we suggest you order the smaller size.

 

Patellar Knee Strap Sizing

 Extra Small

 12 in-13 in;  30-33 cm

 Small

 13 in – 14 in;  33-36 cm

 Medium

 14 in – 16 in;   36-41 cm

 Large

 16 in – 18 in;   41-46 cm

 Extra Large

 18 in – 19 in;   46-48 cm
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 45320154075

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 768 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
A
Verified Purchase
Amazon Customer
Lexington, US
★★★★★ 5
Easy Set Up and Great Sound Distribution
Style: AVR-X3800H
I replaced an old Onkyo 535 with this Denon. It was a significant upgrade. There is zero noise, the Bluetooth is easy to use and provides excellent sound, and the HDMI circuitry is outstanding. The eARC capability is compatible with 2.1 HDMI, and it works seamlessly. Of note, I really like the way it provides the best sound configuration automatically for each source, and I don't have to switch around to find the best sound option. For example, if the source is compatible with Atmos, it provides Atmos. If it's only compatible with Dolby surround, it switches to that. Finally, the distribution of sound is superb. I have a 7.1 speaker configuration of mostly mid-level speakers, and the Denon uses them to their fullest. Rear sounds come clearly from the rear...same with each side, etc. And most of all, I don't have to tweak the system to get that. I just used the provided microphone and ran the set up (which was really easy), and I have really great sound. This unit is a good value.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2026
R
Verified Purchase
Reviewer JR
Draper, US
★★★★★ 4
Expensive, but nice
Style: AVR-X4800H
I previously owned a Denon AVR-2808ci since 2008. That model's remote control didn't work well, and all controls were unnecessarily convoluted, so I was hesitant to buy another Denon. The thing that made me give them another chance is that the sound quality was nice, and I was hoping their engineers learned from their mistakes. I'm glad I gave them the chance. This new model, the AVR-X4800H, also has excellent sound quality; however, unlike the old one I had, the controls on both the receiver itself, and especially on the remote control, are significantly improved. The controls are intuitive, and everything works perfectly. That alone made me happy with the purchase; however, the ability to run 4k @ 120 hz for video gaming, and with extra HDMI ports they have here, all added to that value quite a bit. Then, in addition to that, the old model I had ran super hot. In fact, so hot, from just basic usage, it fried itself three different times in the span of a couple weeks (during the winter time), and it kept being repaired under warranty, until they replaced the top grate with one that allows more ventilation. However, this new model doesn't appear to suffer from that same issue. It gets pretty warm, but nowhere near what the old one did -- and I'm using the same Bose Surround Sound system with the new one. That said, as a precaution, I went ahead and ordered an AC Infinity AirCom to put on top of it, to assist with cooling/ventilation, which has worked wonderfully as well. No the tempts on this Denon AVR have never gone above 87 deg, even on a warm room on the third floor during the late spring / summer time. The other hesitancy I had was the price tag. I only purchased it because it was on a "25% discount", from $2500 down to around $1850. Granted, it was similar when I purchased the other one 15 years ago, but it's just an awful lot of money, in my humble opinion. I would say it was borderline on whether I would buy it for this amount, and if it went up at all, I wouldn't have purchased it. I may not purchase it again for this price, especially if I have one already that is working well -- it was only the wonky one that I already owned, that I just wanted to get rid of, that put more pressure to give them one more chance. With a working device, I probably wouldn't pay these prices again. But, if it were a few hundred dollars cheaper, then I probably would buy it again. Hopefully this helps someone. It's a great device, just a bit expensive. And, if you get it, I would still recommend getting a top cooling fan for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 13, 2024
B
Verified Purchase
B. Husher
Lowell, US
★★★★★ 5
Solid Next-Generation AVR.
Style: AVR-X2800H
I bought this for my 2.1 system used for TV (4K with 120 Hz), movies, video games (4K with 120 Hz), turntable, and digital audio. I have previously used Denon, Marantz, and NAD AVRs. I was using an old NAD without HDMI, and I really wanted everything to synch up. I tried out a stereo receiver since I am only running a 2.1, but I didn't mesh for me. It was fine, but I felt it was lacking especially around multi-channel audio and the lack of an LFE output for the sub. The 2800H was very intuitive and easy to set up right out of the box. Hooked up to a TV, it runs through everything step-by-step. After the initial setup, I downloaded and ran a firmware update. When I finally got to use my ears, the sound was already superior to what I had from the mid-2000s 60-watt-per-channel NAD AVR with an external Bluetooth/DAC and PCM cable from the TV AND the brand-new, 2023 model HDMI-equipped stereo receiver (that cost me more than the 2800H). After running Audyssey, the sound only got better. Then, I set up my 2 front speakers on a bi-amp setting, utilizing two of my unused channels to drive my woofer and tweeter with discrete power sources. The eARC and settings makes turning on my TV, PS5, and AVR easier and quicker. I enjoy the fact that I can use any remote to fix the volume so there is always a remote close when we need a quick mute or change in the volume. I find the HEOS app to be a little clunky, but I am loving it anyway. I can run high-definition audio through streaming, which is a huge improvement from using Apple Airplay 2 or Bluetooth. It also lets me talk on the phone, send and receive messages, etc. without interrupting the music. Right now, I am still tweaking my settings, but I can definitely say that the sound is really good. Have I heard better? Sure. This isn't an 11-channel receiver with Dirac, a 200 watt-per-channel, high-end "audiophile"-grade component, or a tube amp. It is best at multi-channel audio and does really well for music, especially with a good set of speakers and quality sub with parametric EQ. My speakers have are low sensitivity (84dB), and the 2800H puts out enough grunt to listen give nuance and life to music in listening position, to bump the music to listen in my kitchen two rooms over, or watch at theater-level volume in my medium-sized living room with 8-foot ceilings. This thing is getting daily use, and it is more than enough to get the job done in style. For what I need, the 2800H is spot on.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 9, 2023
S
Verified Purchase
superx1
New York, US
★★★★★ 5
High-Quality Wire That’s Worth Every Foot
Size: 14/2 AWG-200 FT, Color: White
The GEARit 14 Gauge Speaker Wire (200 ft, CL2 rated) has been a great addition to my home audio setup. The 14 gauge thickness feels solid and gives me confidence that I’m getting good signal transfer without unnecessary loss, even over long runs. The CL2 rating is a big plus — it’s reassuring to know this cable is safe and approved for in-wall installation if I ever decide to run speakers through the walls rather than on the surface. What I like most: Flexible yet strong — easy to pull through studs and around corners Clear polarity markings — no guesswork when wiring speakers Smooth insulation — doesn’t snag or tangle while measuring and cutting Good value for 200 ft — plenty to cover multiple rooms or channels Whether you’re doing a DIY install or upgrading your audio system, this speaker wire delivers solid performance and peace of mind. Highly recommended!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 21, 2026
Y
Verified Purchase
Yusuf Burns
Louisville, US
★★★★★ 5
Quality wires
Size: 14/2 AWG-200 FT, Color: White
My speakers 🔊 are working much better and the sound is a lot better
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026

recommand products

The ''Midas'' leash
95.59
Bestia Dog Sport GripPro Handle Collar
51.59
The Leopard Puppy Collar
106.59
Clean Puppy Collar
46.90
Cane Corso T-shirt Black V2
44.90