Pay in installments of $108.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 5 - Aug 10
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli Suspension XDK422 Torsion Sway Bar (For 0-4" Lift)The Carli Suspension Torsion Sway Bar CS DTSB3 1419 is designed to enhance the ride quality and control of your lifted Ram 2500 3500 4WD. Like any other spring native to a stock Ram HD, the factory Sway Bar is nearly immobile. Conversely, it's the most neglected spring on the vehicle as people fail to look past the front coils and rear springs when looking to "soften" the factory ride. Well, the factory sway bar is essentially a brace locking the axle
The Carli Suspension Torsion Sway Bar CS-DTSB3-1419 is designed to enhance the ride quality and control of your lifted Ram 2500/3500 4WD. Like any other spring native to a stock Ram HD, the factory Sway Bar is nearly immobile. Conversely, it's the most neglected spring on the vehicle as people fail to look past the front coils and rear springs when looking to "soften" the factory ride. Well, the factory sway bar is essentially a brace locking the axle to the frame. What does this mean? What you hit with one tire is immediately transferred to the other tire and into the frame causing a high frequency reverberation/chatter felt in the cab.
So where does the factory sway bar come in? These trucks are heavy. Even with radius arms (much better for sway control than a 4-Link), a bit of supporting spring rate plays a substantial role in keeping the body roll in check and suspension composed. The Factory sway bar is set up to load the truck to its MAX legal weight and haul it safely - for this application, there's no better bar.
For everyone that's not loaded to the GVWR daily, the Carli Torsion Sway Bar provides the final link lighting the last spring on the truck maximizing the ride quality of the RAM HD Platform. Keeping your factory bar limits comfort, removing it completely makes for questionable control when hauling or emergency maneuvering. After several revisions and years in development, the Carli Torsion Sway Bar Splits the difference perfectly allowing a small amount of differentiation side to side before progressively engaging to add the needed control as leverage is applied. Rip corners in the dirt with surgical precision knowing there's exactly enough rate to hold the body steady while cutting your line through the dirt. Hit the tarmac and enjoy the benefit of the lighter rate bar cruising around town with its on-road feel reminiscent of an independent front suspension - no more chassis reverberation on small bumps and let the suspension dance in the level cab while hitting off-camber driveways.
The arms are constructed of doubled and welded 3/8" cold-rolled steel - 3/4" thick at clamp area. The arms are locked to the bar by Carli's in-house machined 17-4 stainless preload washers and Grade 8 pinch Bolts. The bar itself is a custom rate, heat treated torsion bar passing through fabricated brackets that house the extreme duty, service free bushings. Finishing off the assembly are Sway Bar End Links featuring legendary FK Bearing 5/8" Heat-Treated, Chromoly Race Heims. This bar is designed to work with lift systems up to 4". In typical Carli fashion, there are no disconnects on the end links nor multiple holes in the bar to change the leverage applied. This bar is refined to work in conjunction with Carli custom tuned suspensions to throw an exponent on the ride quality. The rate is set, the bar will not hinder articulation justifying a disconnect.
So where does the factory sway bar come in? These trucks are heavy. Even with radius arms (much better for sway control than a 4-Link), a bit of supporting spring rate plays a substantial role in keeping the body roll in check and suspension composed. The Factory sway bar is set up to load the truck to its MAX legal weight and haul it safely - for this application, there's no better bar.
For everyone that's not loaded to the GVWR daily, the Carli Torsion Sway Bar provides the final link lighting the last spring on the truck maximizing the ride quality of the RAM HD Platform. Keeping your factory bar limits comfort, removing it completely makes for questionable control when hauling or emergency maneuvering. After several revisions and years in development, the Carli Torsion Sway Bar Splits the difference perfectly allowing a small amount of differentiation side to side before progressively engaging to add the needed control as leverage is applied. Rip corners in the dirt with surgical precision knowing there's exactly enough rate to hold the body steady while cutting your line through the dirt. Hit the tarmac and enjoy the benefit of the lighter rate bar cruising around town with its on-road feel reminiscent of an independent front suspension - no more chassis reverberation on small bumps and let the suspension dance in the level cab while hitting off-camber driveways.
The arms are constructed of doubled and welded 3/8" cold-rolled steel - 3/4" thick at clamp area. The arms are locked to the bar by Carli's in-house machined 17-4 stainless preload washers and Grade 8 pinch Bolts. The bar itself is a custom rate, heat treated torsion bar passing through fabricated brackets that house the extreme duty, service free bushings. Finishing off the assembly are Sway Bar End Links featuring legendary FK Bearing 5/8" Heat-Treated, Chromoly Race Heims. This bar is designed to work with lift systems up to 4". In typical Carli fashion, there are no disconnects on the end links nor multiple holes in the bar to change the leverage applied. This bar is refined to work in conjunction with Carli custom tuned suspensions to throw an exponent on the ride quality. The rate is set, the bar will not hinder articulation justifying a disconnect.
Parts Included: CS-DTSBBRKT3-1419; CS-DTSBKIT
Features:
- Compatible With 0"-4" Front Lift
- Easily The Best Bang For The Buck Upgrade For Ride Quality
- Allows Front Suspension To Move Freely Without Giving Up Control
- Torsion Bar May Be Black Or Silver Zinc; Depends On Supply-Chain Availability (Not Requestable)
Note:
Requires Removal Of Electronic Sway Bar On Power Wagons
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 5
Durable, even for a Great Dane!
Color: Ultra, Size: XXL
I've bought many tennis ball sized ChuckIt balls in the past (for medium sized dogs we've owned), so when we knew we were going to be babysitting our daughter's Great Dane, I bought a bigger one for her. The 4" is perfect for her! She plays catch with it, but also likes to gnaw on it. It holds up great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
Another great product from Chuckit!
Color: Ultra, Size: XL
Exactly the high quality that I've come to expect from Chuckit! The plastic/rubber used in their products is extremely tough yet gives enough that it's hard to actually pierce the it and tear apart. We have had Chuckit! Sticks and Balls with launcher for years and love them all. This particular ball is pretty big so my 45 pound pit mix struggles to pick it up but that's part of the fun for him. My 85 pound pit mix can pick it up no problem. The only "complaint" is that the two of them have been having so much fun with their new ball, they have already knocked something over and broke it.
😁
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2026
★★★★★ 5
Perfect for my mid size pit bull
Color: Ultra, Size: XL
Updating my review, the ball only lasted 5 days. I left the 5 stars because we had enough fun those 5 days to be worth the small price. She has dog has a lot of jaw strength, so I’m not surprised
We have a mid size foster pit bull. This ball is her favorite toy. It’s durable and the perfect size for her to play ball safely.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2026
★★★★★ 5
Good quality
Color: Ultra, Size: Large, Color: Ultra, Size: Large
Great quality. I purchased for my daughter’s dog who destroys all toys. This toy holds up. I didn’t realize it was a large and the chickit stick she had was a medium. The large ball ended up working out good for playing inside the house. The dog likes it a lot.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 4
Please read!
Color: Ultra, Size: Large
This dog ball is so useful! We have a large property and we use the Chuckit! thrower with the ball. The color and material of the toy is very high-quality and lasts for a long time. We have been using the Chuckit! brand for a long time now and we love their dog products!
It is a good price and we buy replacement balls like once or twice every 6 months because they keep getting lost in bushes or trees 😂
After some time the color of the ball gets washed out and since our dogs are aggressive chewers, one of the balls we got broke and split open, but it was still usable! The reason that one broke is because we had it for a HECKA LONG TIME!
It has no squeaker so when your dog has the ball it wont make any loud and annoying sounds.
It is easy to pick up with the thrower and it seems durable and sturdy enough to last them a few months. I don't recommend as a cat toy because this ball is specifically designed for dogs. But is your cat likes fetch i guess it could work!
The ball is soft enough to not be hard as steel, but is sturdy enough to not break immediately.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2025