Pay in installments of $591.25 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 1 - Sep 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carrier Comfort™ 5 Ton R454B, Package RTU Gas Heat/Elec Cool, Single Stage, 130k BTU, Low NOx, 460/3Single Packaged Products with Energy Saving Features and R 454B Puron Advance refrigerant. 13. 4 SEER2 11. 05 EER2 81. 0% AFUE ECM Motor Standard Direct Spark Ignition Low Sound Levels Dehumidification Feature Dense Wire Condenser Coil Guard Standard Cabinet air leakage of 2. 0% or less at . 5 in. W. C. when tested in accordance with ASHRAE standard 193. Refrigerant leak detection dissipation system for added safety Maximum allowed elevation is 10,000
Single-Packaged Products with Energy-Saving Features and R-454B Puron Advance™ refrigerant.
• 13.4 SEER2
• 11.05 EER2
• 81.0% AFUE
• ECM Motor-Standard
• Direct Spark Ignition
• Low Sound Levels
• Dehumidification Feature
• Dense Wire Condenser Coil Guard-Standard
• Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193.
• Refrigerant leak detection dissipation system for added safety
• Maximum allowed elevation is 10,000 ft (3,048m) above sea level
Features/Benefits
Features/Benefits
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Puron Advance is Carrier's latest choice of Refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with Puron Advance and contains a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential Puron Advance (R-454B) refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from aluminum tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 69.0 dBA.
Easy to service cabinets provide easy 3-panel accessibility to serviceable components during maintenance and installation. The basepan with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19.05 mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers 62.2.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Limited Warranty*
• Default 5-year parts limited warranty
- 10-year parts limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 5-year on compressor limited warranty
-10-year on compressor limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 20-year stainless steel heat exchanger limited warranty
- Life stainless steel limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners. See warranty certificate for complete details and restrictions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 24 reviews
Sort
Product Reviews
★★★★★ 5
Good jig
Size: 11 Holes
The jig itself is great. The markings make it easy to be consistent; the design is well thought-out; and the build quality is good. I would recommend replacing the drill bit, though. A nice brad point will serve you better.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 5, 2025
★★★★★ 5
Great
Size: 11 Holes
Worked better than expected
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 10, 2026
★★★★★ 2
In the trash after a single use
Size: 11 Holes
For context, I’m a seasoned woodworker and always evaluate tools with the price in mind. This seemed like a good deal and in fact when it arrived, it looked and felt like reasonable quality for the price. Unhappily, the first bookshelf I drilled was off from side to side by almost 3 mm which would make a really wobbly shelf situation. It took a while to figure out what was happening, but I finally realized the metal bushings that guide the drill bit are so soft that they cored out from contact with the bit even though I was cautious to not put the bit in under power but to get it in the bushing and aligned before drilling. Still, the bushings started angling immediately. So when you then use those angled bushings to set the pin for the next series, it’s off by a little bit. Then the next is off by a little more…. By the time I drilled holes up and down a 6’ high shelf, the bushings were out of square, the holes were 3 mm out of alignment, and the shelf sides were firewood. Back to the drawing board and this goes in the trash, I’m afraid.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
★★★★★ 5
Good Product!
Color: Taupe, Size: 20-Inch x 6-feet
This line is fantastic. Wonderful grip and nice color selection. Does the job each time and measuring is a breeze.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 5
Love this stuff
Color: Black, Size: 12" x 10'
I use a manual wheelchair and have some hand strength issues. This shelf liner is all over my home not just as lining to protect surfaces but cut in various shapes for everyday use.
The kitchen and bathroom have them for a little more grip to open bottles and containers. In the dining room, to put under plates or bowls, so that don't move around while I eat.
The living room has a small toolbox, which holds a number of different sizes and shapes for the tools and for items like cables, I'm connecting to entertainment devices. For this purpose alone, it's definitely cheaper than the Mercedes version of grip material Dycem, as well as each Disabled Catalog's version of stuff that's just like this shelf liner. It's also a far better quality item than Dollar stores. Additionally it works great as it's described.
SPECIFIC TO NAMED USE:
As shelf liner it does take a little time to flatten out and stay in place in drawers. I use it puffy side up, which creates small indentations from items with any serious weight—stereo equipment comes to mind. A lot of the indentations will hold to the item that created them. To leave the liner where it lays, I always slightly lift each corner/foot of the item on the liner and release the liner, before lifting the whole object up.
Imo the black looks better under devices on glass shelves.
Microfiber dusting cloths are used on the liner and seem to do a pretty good job. That's said, with a weekly normal dusting done — weighted items are dusted where they're reachable, light weight shelved items moved, dusted, and open areas of liner on shelves dusted.
PLUS once a month (1x) all items are moved thoroughly dusted and liners are "shaken out" and wiped down with a DAMP cloth. Shelf liner needs to be 100% dry, before putting it back on your shelves, especially before putting back electronics.
The wet cloths used here, have just enough moisture to remove any remaining dust after a liner shaking but it doesn't feels wet to the touch, after damp wiping.
But to err on the side of caution, the first shelf's liner and contents, are restored after the last shelf is done. Then each shelf subsequently follows.
Personally as someone disabled, I find it to be a great item that does two jobs well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 12, 2023