GODIAG GT100 Pro Plus GPT OBD2 Break Out Box ECU Connector Signal Detector

GODIAG GT100 Pro Plus GPT OBD2 Break Out Box ECU Connector Signal DetectorGODIAG GT100 PLUS GPT testing platform for OBDII protocol communication detection and ECU maintenance diagnosis programming coding. GT100 PLUS has a voltage and current display which is convenient for maintenance engineers to judge the current working status of ECU. GODIAG GT100 16PIN Protocol OBD II breakout box ECU Connector for off board module and key programming and features a display readout for both voltage and current draw through the box.

GODIAG GT100 PLUS GPT testing platform for OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding. GT100 PLUS has a voltage and current display which is convenient for maintenance engineers to judge the current working status of ECU. GODIAG GT100 16PIN Protocol OBD-II breakout box ECU Connector for off-board module and key programming and features a display readout for both voltage and current draw through the box.

Feature:
GODIAG GT100:
1. GODIAG GT100 mainly used for changing automotive diagnostic OBD stitch to signal judgment level transfer.
2. Supply power to the car when changing battery, in order to prevent the body electrical equipment locked automatically.
3. Detect car communication by working with any diagnostic tool.
4. Supports OBDII 16PIN protocol communication detection and ECU maintenance, diagnosis, programming, coding.
5. OBDII protocol communication detection and ECU maintenance/diagnosis /programming /coding.
6. Able to connect the single modules or multiple modules of the vehicle.
7. Can work with most device to do test, will make your operation much easier , such as xhorse vvdi2, Autel Scanner, Launch Scanner, Vident Scanner, and so on.
8. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost,automatically locked,the key remote control fails and the fault light turns on.

GODIAG GT100 PLUS GPT:
1. Use GPT to read and write ECU with devices (such as PCMFLASH, KESSV2).
2. Support DOIP-ENET Diagnostics.
3. 24V to 12V Voltage Conversion.
4. Work with CAS1/CAS2 Mech-Key Test Platform and CAS2 CAS3 SER Semi Smart Test Platform.
GODIAG GT100 PLUS GPT ENET DOIP 24V-12V AUTO TOOLS OBD II Break Out Box ECU Connector
5. For OBDII protocol communication detection and ECU maintenance / diagnosis / programming / coding. GT100 PLUS has a voltage and current display which is convenient for maintenance engineers to judge the current working status of ECU.
6. It can convert the car OBD2 interface into 16 pin for signal detection. It can be connected to the single modules or multiple modules of the vehicle. It can also be connected with any diagnostic tool to tell whether the car communication is good or not.
7. It supports the 24v to 12v voltage conversion, DOIP-ENET communication and GPT to read and write ECU data.
8. It can also supply power to the car when you change the battery to avoid the vehicle control module data being lost, automatically locked, the key remote control fails and the fault light turns on.

Can support all key lost, activate the meter and wake up the anti-theft module.
(1) for Porsche, VW 4th generation smart key &5th generation card key (models such as: new A6L Touareg A4 Q5 A7), use GT100 short the banana PIN 16----PIN 1, After the instrument is on, the key matching tool connects to GT100+ female Head for data collection. Some vehicle instruments are not bright, but data can also be collected, for example: A6L Q7.
(2) Can replace the engine ECU for Toyota; and Support onnect short-circuit PIN13-PIN4 with Key Programmer when do all key lost for Toyota.
(3) Mitsubishi all key lost matching or all key lost for remote control key, need to set OBDII short-circuit PIN1-PIN4.
 With BMW CAS4 & CAS4+ Test Platform and BMW FEM/BDC test platform，GT100 can work with Xhorse VVDI2/Lonsdor K518/CGDI/Autel im608 to Support Off-site Key Programming/All Keys Lost/ Add New Key.