SKU: 22231948816

JAC2512 - Schauer 12V, 25A Fully Automatic Electronic Charger/Maintainer - 120/240VAC Input - Includes Choice of DC Connector

$112.02 $124.47
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $31.12 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 1 - Sep 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

JAC2512 - Schauer 12V, 25A Fully Automatic Electronic Charger/Maintainer - 120/240VAC Input - Includes Choice of DC ConnectorModel JAC2512 (0891 121) Schauer JAC2512 12V, 25A Intelligent Electronic Charger with Float Maintenance Mode The Schauer JAC2512 is a Fully Automatic, 3 Stage Electronic Charger with a gray SB50 connector on the 96" DC Lead. Multiple DC Adapters are available to fit various applications. This Intelligent Charger may be left connected to the battery indefinitely, keeping it safely charged without danger of overcharging. The JAC2512 will charge any type

Model JAC2512 (0891-121)

Schauer JAC2512 - 12V, 25A Intelligent Electronic Charger with Float/Maintenance Mode


The Schauer JAC2512 is a Fully Automatic, 3-Stage Electronic Charger with a gray SB50 connector on the 96" DC Lead. Multiple DC Adapters are available to fit various applications. This Intelligent Charger may be left connected to the battery indefinitely, keeping it safely charged without danger of overcharging.


The JAC2512 will charge any type lead acid battery, including conventional flooded cell, maintenance free, deep cycle, gelled-electrolyte, or AGM valve regulated batteries. The 3-Stage Charge Control provides Modified Constant Current Charge to a constant finishing voltage, then to a float/standby voltage to maintain the battery in a fully charged condition.


The JAC2512 features a heavy-duty aluminum case with mounting flanges, and is suitable for on-board mounting in various industrial equipment. Multi-Voltage AC Input via 115V/230V selection switch on base. Supplied with a 72" grounded North America AC input cord equipped with IEC C13 plug for connection at the charger. For international use, simply replace with an AC cord equipped with a locality-appropriate mains power plug and IEC C13 connector.


ORDERING NOTES:

This charger is equipped with a gray SB-50 connector on the DC Lead. Purchase options include your choice of a 12" Industrial Adapter lead that mates to the SB-50 plug. Select your connector plug from the choices above and note the product picture for your choice before adding the charger to your cart.

 

Note that there are options for the SB50 connector ONLY (no adapter included). There is also an adapter with stripped wire leads, allowing you to attach your own connector, or make a permanent connection, while allowing the flexibility of disconnection at the SB50.

Features

- Fully Automatic with Float/Maintenance Mode
- May be left connected to batteries indefinitely
- Charges all types of lead acid batteries
- 115/230VAC Multi-Voltage Input (voltage selection switch on underside of base)
- Multiple DC Lead Adapters Available
- Mountable, Aluminum case with LED status lights
- Current limiting
- Short Circuit and Reverse-Polarity protection (user-replaceable fuse)
- Capable of full current at 25.2V continuous - 100% duty cycle

Specifications

- Flooded Finish Voltage: 14.8V ±0.2 
- Gel/AGM Finish Voltage: 14.4V ±0.2 
- Float Voltage: 13.5V ±0.2 
- AC Input Voltage: User-Selectable 115/230VAC, 50/60Hz (selection switch on underside of base)
- AC Input Amps: 15A @ 115VAC
- Nominal DC Output Volts: 12V
- Nominal DC Output Amps: 25A
- Minimum Battery Voltage Required to Start Charging: 4V
- AC Cord: 72", with grounded North America 115VAC plug (IEC C13 connector)
- DC Lead: 96", with gray SB50 plug
- Unit Length (case): 10.25"
- Unit Width (case): 7.13"
- Unit Width (overall): 8.38" (includes mounting flanges)
- Unit Height: 3.00"
- Unit Weight: 7.5 lbs.
- Shipping Length: 12"
- Shipping Width: 10"
- Shipping Height: 8"
- Shipping Weight: 9.0 lbs.
- Approvals: CE
- Warranty: 2 Year Limited

Operation

- Not intended for use as a DC power supply
- Operate in an environment with proper ventilation
- Do not operate in a damp or wet environment

 

LED Status Indicator Light in normal charge cycle:
- Upper LED (Power): RED – AC power connected, Power Switch ON
- Lower LED (Equalizer): OFF - Charger Not Connected or Connected and minimum battery voltage not sensed
- Lower LED (Equalizer): YELLOW – Charging stages Bulk and Absorption - cooling fan active
- Lower LED (Equalizer): GREEN – Green – Battery charged, Charger in Maintenance Float mode
- Flashing Red & Green LEDs: Safety Timer shut off function

 

NOTE: PLP Battery Supply recommends that chargers in this range have an amperage output that equates to a minimum of approximately 10-15% the AH capacity of the battery being charged. For example, this 25 amp charger would be appropriate for a battery with a maximum AH capacity in the 250AH-375AH range. Chargers with marginally low output ratings may result in unacceptably long battery charge times and/or damage to the charger.

Information Downloads

JAC2512-PS Power Supply User Manual

 

JAC2512 Battery Charger User Manual

 

Schauer Replacement Fuse Guide

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 22231948816

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 8 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Bluesman
Belleville, US
★★★★★ 5
Incredibly strong magnets and thick, robust hooks. Excellent combination!
Style: Updated 3.46in Magnet L Red Hooks 2PCS
These magnetic hooks are really strong. Seriously! Each part is made to carry weight and last. The hooks are built out of thick steel stock. They bolt up to large magnets that grab onto steel surfaces and won't let go. The cabinets in my shop are all steel so these worked perfectly on the sides of the lower units. I have a few #12 AWG extension cords that are bulky and heavy. Truthfully, I didn't think these hooks would handle them. They do without any issue. Another application is a 30' long #10/4 AWG SO cable that powers my powder coating oven. It's usually unplugged and wrapped up. It would often end up on the floor where it was constantly in the way. The outside of the oven is all steel but I didn't want to make holes in it for cable hangers. Again, I didn't think that these magnetic hooks could possibly be strong enough to handle the weight of that cable but they do. And once they're attached, it takes a lot of effort to remove them! Amazing performance!! I'm thrilled with these magnetic hooks. They are super strong and, obviously, simple to use. Importantly, they stay in place as they should. I wholeheartedly recommend these hooks to anyone. Great product! Incredibly strong magnets and thick, robust hooks. Excellent combination!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 12, 2026
A
Andrea
Fort Morgan, US
★★★★★ 5
Great for the storm shelter!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
In our storm shelter we had some lights that we tried to hang up, multiple times, with no luck! Then I found these garage hooks. They are overkill for the lights, but I’m so happy that we now have lighting in the storm shelter. I could think of so many other uses for these. They strength of the magnets is awesome!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 19, 2026
K
KindaPicky
Louisville, US
★★★★★ 4
Magnet is super strong but hooks are not adjustable
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
I ordered this set of Mutuactor magnetic hooks because I was tired of thinking I had things organized and then finding previously hung magnets have slid down the wall. It was a first for me to have to assemble a magnetic hook. This was made slightly more difficult by requiring a wrench. So many items these days arrive with a disposable little hex wrench or whatever is needed for assembly. Not in this case. Maybe the manufacturer assumes if you are spending $15 per magnet to hang your tools you have a wrench handy. Anyway, I got my wrench and found no instructions. I know from life that the order is bolt-washer-lock washer-nut. The next question arose when I found one bolt and several holes... hmmmm. It looks like they wanted to provide the option to screw the hooks directly to the wall. I am not sure the average person would pay that price just for a hook, though. I chose a hole and it seems to be the right one. The good news is I was quickly in business. Soon one magnet was snatched by my husband for his rolling tool cart. He hung his (very heavy) Sawzall and the magnet never moved. He liked the rubber coating that protects his tools. I chose to take advantage of the amazing grip of this thing to hang my most used (and also very heavy) all-clad pan from the side of my fridge. The refrigerator had some sort of glossy powder coat and magnets hold well if you try to pull them straight off but end up sliding down anyway. This is where I came to appreciate the rubber shoe of this magnet. It protects my fridge but I think it plays an essential part in the grip strength of the magnet. I can not slide it around - I need to use two hands to pull it off then place it in another position. To give a magnet strength example I had one magnetic hook on my desk as I was writing this review. My nearby desk-size scotch tape dispenser came sliding over and the magnet grabbed it. I was able to lift the tape dispense just by the magnet grabbing the little piece of metal serrated teeth that cut the tape. There is no other metal in my dispenser. That's it! In summary, four stars because it REALLY grips and holds a lot of weight. Minus a star because I do think they are a little expensive, they required assembly without tools or instructions, and the hooks themselves are not adjustable. I have some similar magnetic hooks and you can move the two prongs apart or together depending on what your tool size is. These prongs are strong and firm and are not moving and this cuts down of the number of uses a little bit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 12, 2026
F
Francisco P.
West Palm Beach, US
★★★★★ 5
Develop some quality, worth-while hangups!
Style: Updated 3.46in Magnet L Red Hooks 2PCS, Style: Updated 3.46in Magnet L Red Hooks 2PCS
Organization is key for any shop space. This goes double for smaller shops. If you look around and DON'T see something that could benefit from getting off the floor and onto a peg or hook, I applaud you! For the rest of us, where can we get started? Here you go. These hooks come two in a package. The quality of these are easy to see. The powder coating is very nice as powder coating is more durable than paint. The orange plastic coating on the hooks feels thick and durable. Assembly is easy. There's a threaded post sticking out of the black rubber coated magnet "puck" that you insert into a opening on the hook and secure with washers and a nut. I like that they included both a washer and locking washer. If it matters, I always stack the fastener in the following order: washer, locking washer, then nut. Using a 14mm socket, I was done in no time. How's much will these hooks hold? The magnetic power on these hooks feels substantial. When I slowly approached the side of my metal toolbox, the magnet made an audible snap when it magnetized to the side. It felt strong! The bend at the base of the hook added stability pressing against the toolbox but didn't mark the surface since it was covered by plastic. It held my heavy 50a extension cable and the other hook held both my 25' and 50' pressure washer hoses. Neither moved at all and felt very secure. Whether your shop is your garage or basement, making the most of your space makes a difference and these can help. These are very strong and hold items safely. I'm very happy having these around and will be getting more. If you have a metal surface that you can attach hooks, give these a try. It's a quality solution!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 21, 2026
B
Verified Purchase
breezob
Phoenix, US
★★★★★ 1
Not strong
Style: Updated 3.46in Magnet L Red Hooks 2PCS
The magnets are not strong enough to hold garden tools!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026

recommand products

Ocean Mist Candle 400g
30.00
Covercraft C15869UG Custom Ultratect Cab Area Truck Cover - Gray
219.50
Rainbow Unicorn Candle 400g
30.00
HKM-6780093 Cozy Four-Level Cat Litter House in Black and Gray or Red and Black
52.99
Covercraft C16402D1 Custom Sunbrella Cab Area Truck Cover - Pacific Blue
379.00