Pay in installments of $274.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Clutch Kit for Suzuki Baleno, Jimny & Toyota Starlet (2020+) K15B - VALEO 843653Vehicle Fitment & Part Details This 2 piece Valeo clutch kit (SKU 843653) suits the K15B 1. 5 L petrol engine found in Suzuki Baleno, Jimny, Ciaz, Ertiga and Vitara Brezza, plus Toyota Starlet, Rumion, Starlet Cross and Urban Cruiser models. The kit contains a 192 mm clutch disc and pressure plate for solid flywheel, push type clutch systems; the release bearing is not included and must be ordered separately. Always verify VIN, engine code (K15B), and
Vehicle Fitment & Part Details
This 2-piece Valeo clutch kit (SKU 843653) suits the K15B 1.5 L petrol engine found in Suzuki Baleno, Jimny, Ciaz, Ertiga and Vitara Brezza, plus Toyota Starlet, Rumion, Starlet Cross and Urban Cruiser models. The kit contains a 192 mm clutch disc and pressure plate for solid flywheel, push-type clutch systems; the release bearing is not included and must be ordered separately. Always verify VIN, engine code (K15B), and flywheel type before ordering.
Key Details
- SKU
- 843653
- Brand
- Valeo
- MPN
- 843653
- Component
- Clutch Kit
- Configuration
- 2-piece (disc + pressure plate)
- Primary Fitment
- Suzuki Baleno WB 2022+ (K15B)
- Engine
- K15B 1.5 L petrol, 77 kW
Key Benefits
- Valeo OE-standard 2-piece clutch kit covering the K15B engine used across the Maruti-Suzuki and Toyota Indian-built passenger range sold in South Africa.
- Single SKU covers both Suzuki (Baleno, Jimny, Ciaz, Ertiga, Vitara Brezza) and Toyota (Starlet, Rumion, Starlet Cross, Urban Cruiser) K15B applications - same component, different badges.
- 192 mm clutch disc with 19.14 mm x 18-spline hub, push-type actuation for solid-flywheel applications.
Product Specifications
| Specification | Value |
|---|---|
| Clutch Disc Diameter | 192 mm |
| Hub Profile | 19.14 mm x 18 splines |
| Actuation Type | Push-Type |
| Flywheel Type | Solid flywheel (not dual-mass) |
| Kit Configuration | 2-piece |
| Included | Clutch disc, clutch pressure plate |
| Not Included | Release bearing, slave cylinder, pilot/spigot bearing |
Vehicle Fitment
Includes 9 supplied applications.
View Full Vehicle Fitment (9 applications)
| Make | Model | Body | Years | Engine | Power |
|---|---|---|---|---|---|
| Suzuki | Baleno | WB | 2022- | K15B, 1.5 Petrol DOHC | 77 kW |
| Suzuki | Ciaz VVT | - | 2019- | K15B, 1.5 Petrol DOHC | 77 kW |
| Suzuki | Vitara Brezza VVT | NC | 2020-2023 | K15B, 1.5 Petrol DOHC | 77 kW |
| Suzuki | Jimny Allgrip | JB74 | 2018- | K15B, 1.5 Petrol DOHC | 77 kW |
| Suzuki | Ertiga VVT | NC | 2019- | K15B, 1.5 Petrol DOHC | 77 kW |
| Toyota | Starlet | WB | 2022- | K15B, 1.5 Petrol DOHC | 77 kW |
| Toyota | Starlet Cross | - | 2024- | K15B, 1.5 Petrol DOHC | 77 kW |
| Toyota | Rumion VVT | NC | 2021- | K15B, 1.5 Petrol DOHC | 77 kW |
| Toyota | Urban Cruiser | NC | 2020- | K15B, 1.5 Petrol DOHC | 77 kW |
Fitment Notes
- Always match engine code (K15B) and verify VIN before ordering. Check clutch disc diameter (192 mm) and spline count (18) against your old unit.
- Toyota-Suzuki partnership: Since 2018 Toyota South Africa has sold rebadged Maruti-Suzuki models built in India under a manufacturing partnership. Direct pairings: Toyota Rumion = Suzuki Ertiga, Toyota Starlet = Suzuki Baleno, Toyota Starlet Cross = Suzuki Fronx, Toyota Urban Cruiser = Suzuki Vitara Brezza. All use the identical K15B engine and drivetrain, so the same clutch kit fits both brands.
- Power output shown as 77 kW applies to all K15B applications in this range (same engine calibration).
- Suzuki Fronx (Starlet Cross donor) is not explicitly listed in the supplier fitment table but is confirmed as the Suzuki equivalent of the Starlet Cross. Verify fitment with VIN before ordering for a Fronx-badged vehicle.
This clutch kit fits only the current-generation models listed above with the K15B engine. It does NOT fit earlier-generation vehicles sharing the same nameplate:
- Toyota Starlet: Fits only the 2020+ Starlet (WB body, Baleno-based, K15B engine). Does NOT fit the classic 1978-1999 Toyota Starlet (EP71 / EP81 / EP82 / EP91) with 4K, 2E, 1E or 4E-series engines - those are entirely different vehicles with incompatible clutch specifications.
- Suzuki Baleno: Fits only the current 2022+ Baleno (WB body, K15B engine). Does NOT fit the 2016-2021 Baleno with K14B engine, and does NOT fit the original 1995-2002 Suzuki Baleno / Cultus Crescent.
- Suzuki Jimny: Fits only the current JB74 Jimny (2018+, K15B engine). Does NOT fit previous Jimny generations (SJ410, SJ413, JB23, JB43, JB53) with G13, M13A or similar engines.
- Suzuki Vitara: Fits only the Vitara Brezza / Urban Cruiser (NC body, K15B engine). Does NOT fit the Grand Vitara (JT / JB627 series), the older 4-door Vitara (TL / TA), or the first-generation Vitara.
- Suzuki Ertiga / Toyota Rumion: Fits only the current NC-body Ertiga VVT and Rumion VVT with K15B engine (2019+ / 2021+). Does NOT fit earlier K14B Ertiga variants.
If in doubt, confirm the engine code stamped on the engine block reads K15B before ordering. Send us your VIN for verification if required.
- This is a 2-piece kit - the release/throwout bearing is NOT included. Order a matching release bearing separately to complete the job.
- Suitable for solid flywheel applications only. If your vehicle is fitted with a dual-mass flywheel (DMF), this kit is NOT the correct part.
- Inspect the flywheel face for heat cracking, bluing, glazing, warping or uneven wear. Have the flywheel resurfaced by a machine shop, or replace it, before fitting the new clutch.
- Inspect and replace the pilot/spigot bearing at the same time if your vehicle is fitted with one.
- Use a dedicated clutch alignment tool during installation. Misalignment damages the disc splines and prevents clean engagement.
- Bleed the hydraulic clutch system after installation if the slave cylinder or clutch line was disturbed.
- Avoid oil or grease contamination of the friction surfaces. Repair any rear main oil seal leak before assembly.
- Torque the pressure plate bolts to the vehicle manufacturer's specification in a cross-pattern sequence.
Installation / Use / Maintenance Tips
- Compare the new clutch disc and pressure plate to the removed items before fitting - confirm disc diameter, spline count, hub thickness and pressure plate bolt pattern all match.
- Degrease the flywheel face and pressure plate contact surface thoroughly before assembly - do not touch the friction face of the new disc with bare hands.
- Fit the clutch disc with the marked "flywheel side" or raised hub facing the correct direction - incorrect orientation prevents the gearbox from mating fully.
- Tighten pressure plate bolts gradually in a cross pattern to avoid distorting the cover. Follow manufacturer torque specification.
- Pack a small amount of high-temperature grease on the input shaft splines and release bearing pivot point - avoid over-greasing which can contaminate the disc.
- Recheck bolt torque and hydraulic bleed after the first short drive; check clutch pedal travel and biting point.
Common Questions
Will this clutch kit fit my 2020+ Toyota Starlet?
Yes - the current Toyota Starlet (WB body, 2020+) is a Suzuki Baleno rebadge with the K15B 1.5 L petrol engine, and this clutch kit covers that application. Do NOT use this kit for the classic 1990s Toyota Starlet (EP-series) - those are completely different vehicles.
Why does a Toyota part fit Suzuki vehicles?
Since 2018, Toyota South Africa Motors has sold several rebadged Maruti-Suzuki models under a manufacturing partnership. The Rumion, Starlet, Starlet Cross and Urban Cruiser are built in India by Maruti-Suzuki and share all mechanical components with their Suzuki equivalents (Ertiga, Baleno, Fronx, Vitara Brezza). The same clutch kit fits both brands because it's the same vehicle under the skin.
Is the release bearing included?
No. This is a 2-piece kit containing only the clutch disc and pressure plate. Order a matching release bearing separately to complete the job.
Does this fit a dual-mass flywheel (DMF)?
No. This kit is for solid (single-mass) flywheel applications only. The Suzuki K15B engine in these models uses a solid flywheel from the factory, but always confirm before ordering.
What does "push-type" mean?
Push-type refers to the release mechanism - the release bearing pushes on the pressure plate diaphragm fingers to disengage the clutch. The opposite is pull-type, where the bearing pulls outward. This kit is designed for push-type operation and will not work in pull-type applications.
How do I confirm my vehicle has a K15B engine?
The engine code is stamped on the cylinder block - typically on the front or side of the engine near the gearbox mating surface. Your VIN plate, vehicle registration document (NaTIS) or service book may also list the engine code. Contact us with your VIN if you need verification.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy