Pay in installments of $71.20 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Sep 1 - Sep 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ATS01N232QNMain Range of product Altistart 01 Product or component type Soft starter Product destination Asynchronous motors Product specific application Simple machine Device short name ATS01 Network number of phases 3 phases [Us] rated supply voltage 380 415 V 10 10 % Motor power kW 15 kW, 3 phases at 380 415 V IcL starter rating 32 A Utilisation category AC 53B conforming to EN IEC 60947 4 2 Current consumption 160 A at nominal load Type of start Start with
Main
| Range of product | Altistart 01 |
| Product or component type | Soft starter |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| Motor power kW | 15 kW, 3 phases at 380...415 V |
| IcL starter rating | 32 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 160 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 4.5 W at full load and at end of starting 324.5 W in transient state |
Complementary
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] control circuit voltage | Built into the starter |
| Starting time | Adjustable from 1 to 10 s 1 s / 50 10 s / 5 5 s / 10 |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete input voltage | 24...40 V |
| Discrete input logic | Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA |
| Discrete output current | 2 A DC-13 3 A AC-15 |
| Discrete output type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type | 1 LED (green) for starter powered up 1 LED (yellow) for nominal voltage reached |
| Tightening torque | 0.5 N.m 1.9…2.5 N.m |
| Electrical connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible with cable end 1 1...6 mm² AWG 10 power circuit |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 154 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Net weight | 0.56 kg |
| Compatibility code | ATS01N2 |
| Motor power range AC-3 | 15…25 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
Environment
| Electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 Conducted and radiated emissions level B conforming to IEC 60947-4-2 Damped oscillating waves level 3 conforming to IEC 61000-4-12 Electrostatic discharge level 3 conforming to IEC 61000-4-2 EMC immunity conforming to EN 50082-1 EMC immunity conforming to EN 50082-2 Harmonics conforming to IEC 1000-3-2 Harmonics conforming to IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 Immunity to electrical transients level 4 conforming to IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | EN/IEC 60947-4-2 |
| Product certifications | C-Tick CSA CCC GOST UL B44.1-96/ASME A17.5 for starter wired to the motor delta terminal |
| IP degree of protection | IP20 |
| Pollution degree | 2 conforming to EN/IEC 60947-4-2 |
| Vibration resistance | 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6 1.5 mm peak to peak (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn for 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 |
| Ambient air temperature for operation | -10…40 °C (without) 40…50 °C (with current derating of 2 % per °C) |
| Ambient air temperature for storage | -25…70 °C conforming to EN/IEC 60947-4-2 |
| Operating altitude | <= 1000 m without > 1000 m with current derating of 2.2 % per additional 100 m |
Offer Sustainability
| REACh Regulation | REACh Declaration |
| REACh free of SVHC | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| RoHS exemption information | Yes |
| China RoHS Regulation | China RoHS declaration |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins |
Contractual warranty
| Warranty | 18 months |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 23 reviews
Sort
Product Reviews
★★★★★ 1
Burned my already sensitive feet, too big
Color: Pink & Beige, Size: Medium/Large(fits size 8 to 11)
Feels icky, and the heat gets trapped and literally felt like my feet were being burned by these. The bottoms of these feel prickly and they are way too big. You have to sit still and cannot walk in them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
★★★★★ 5
Just as good as paraffin wax
Color: Pink & Beige, Size: Medium/Large(fits size 8 to 11)
I might prefer these socks over paraffin wax. They are comfy and very moisturizing. I use these socks once a week to keep the heels and soles of my feet moisturized between pedicures. I rinse with warm, soapy water then hang to dry. They are hard to walk in, but there's a saying printed in the socks that's says something to the effect of "take a break, stay off your feet" lol I love that as a reminder to put my feet up and relax
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 9, 2026
★★★★★ 5
Love these!
Color: Pink & Beige, Size: Small(fits up to size 7)
Love these! As I write this review, I’m sitting in my recliner with these on. I have had other silicone socks in the past and would like to share a few of the things that I have learned.
These fit great! The others were 2-3 sizes too big because you could not order a size. I wear a size 7 women’s shoe. I got the smaller size. I walked around my apartment in my old ones and they got kinda yucky. Now, I sit in my recliner, put them on and chill for a few hours. I now take them off and put in a ziplock bag so they stay nice and clean (no cat hair!). I use them once a week usually on Saturday or Sunday as I’m a working girl. Also, I use Auqaphor before I put them on and put cotton socks on after I’m finished. Your feet will be SO soft. This is not a one and done…I do this every week especially during sandal season! I know this was lengthy and I hope you got some tips.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026
★★★★★ 5
Shine, not glitter.
Color: Gold
I love this! I thought it was glitter, but its shine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 4, 2026
★★★★★ 5
Very pretty
Color: Silver
Pretty spray glitter. Sprayed it in my braids and it lasted all day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026