SKU: 12482032279

SUN RA - LIGHTS ON A SATELLITE: LIVE AT THE LEFT BANK 1978 [RSDBF24] (2xLP)

$39.59 $43.99
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $11.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Sep 1 - Sep 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

SUN RA - LIGHTS ON A SATELLITE: LIVE AT THE LEFT BANK 1978 [RSDBF24] (2xLP)RECORD STORE DAY 2024 RELEASE. EDITION OF 1,500. STARTING THE DAY WITH 3 COPIES. BLACK VINYL 2xLP. "Available for the very first time, the intergalactic icon Sun Ra and his Arkestras Lights On A Satellite: Live at the Left Bank was recorded on July 23, 1978 at the Famous Ballroom in Baltimore, Maryland by the Left Bank Jazz Society. The limited edition 180g 2 x LP set contains audio from the Sun Ra Archives, and was researched and compiled by Sun Ra

RECORD STORE DAY 2024 RELEASE. EDITION OF 1,500.


STARTING THE DAY WITH 3 COPIES.

 BLACK VINYL 2xLP.

"Available for the very first time, the intergalactic icon Sun Ra and his Arkestra’s Lights On A Satellite: Live at the Left Bank was recorded on July 23, 1978 at the Famous Ballroom in Baltimore, Maryland by the Left Bank Jazz Society. The limited-edition 180g 2 x LP set contains audio from the Sun Ra Archives, and was researched and compiled by Sun Ra archivist Michael D. Anderson. Mastering by engineer Joe Lizzi and lacquers cut by Matthew Lutthans at The Mastering Lab. The critically acclaimed independent filmmaker Robert Mugge has also provided audio from the recordings he made at the Left Bank, featured in his 1980 film Sun Ra: A Joyful Noise. The deluxe package includes liner notes by veteran music critic J.D. Considine, plus interviews with the centenarian Arkestra saxophonist Marshall Allen, NEA Jazz Master saxophonist Gary Bartz and pianist Craig Taborn."

Tracklist
Side A 1. BAND INTRO - THUNDER OF DRUMS (4:27) 
2. TAPESTRY FROM AN ASTEROID (12:52)
3. SOMEWHERE OVER THE RAINBOW (2:59)
4. A PLEASANT PLACE IN SPACE (4:26)
Side B
1. SPACE TRAVELIN' BLUES (5:56)
2. YEAH MAN (2:36)
3. BIG JOHN SPECIAL (3:09)
4. LIGHTS ON A SATELLITE (4:47)
5. LADY BIRD (5:52)
Side C
1. COCKTAILS FOR TWO (4:26)
2. WATUSI (11:23)
3. THEY PLAN TO LEAVE (9:09)
Side D
1. IMAGES IN A MIRROR (4:08)
2. WE TRAVEL THE SPACEWAYS (7:28)
3. BLUES PIANO JOINT (6:05)
4. 'ROUND MIDNIGHT (5:50)
Total Time - 95:45

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 12482032279

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 29 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Carnegie, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
S
Verified Purchase
Sami Jo
Massapequa, US
★★★★★ 5
Quick and pretty privacy screen
Color: Beige, Size: 4 Panel-67”
Relatively easy to assemble. Looks very nice at the nursing home of my friend and is sturdy. Unfortunately, aides place towels and sometimes clothes over it and it stands stable. The bamboo color is nice to look at. It is lightweight and can be moved easily!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
K
Verified Purchase
KMB
Waukegan, US
★★★★★ 5
Good height, versatile.
Color: Brown, Size: 4 Panel-67”
Well made, nice style. Best indoors since it tends to blow over if outside.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
M
Verified Purchase
Michelle
Cuba, US
★★★★★ 3
Esthetically sound, materially flimsy
Color: Beige, Size: 4 Panel-67”
The item at first seemed okay and quality was good. But it’s a little flimsy and tips over frequently. I’m thinking of returning and replacing pretty soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
S
Verified Purchase
Sherri H
Lexington, US
★★★★★ 5
Bamboo 3 panel room divider
Shorter than my other screen but easier to move around for different uses. Very nice. Well made.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026

recommand products

Wild Devon - Double Knit | Larkspur
13.50
Wild Devon Collection - Aran | Angelica
13.50
Wild Devon Collection - Aran | Nettle
13.50
PURPLE IRISH SEA MOSS
40.00
Kamasa 6mm Spare Cutter for 55997 56011
29.99