Adams Driveshaft Heavy Duty Series Rear 1310 CV Driveshaft — 1987–1993 Jeep YJ Wrangler | Yoke-Style SYE Required | ASDYJ-1310CVR-G

Adams Driveshaft Heavy Duty Series Rear 1310 CV Driveshaft — 1987–1993 Jeep YJ Wrangler | Yoke-Style SYE Required | ASDYJ-1310CVR-GThe Adams Driveshaft Heavy Duty Series Rear 1310 CV Driveshaft (part number ASDYJ 1310CVR G) is custom manufactured for 19871993 Jeep YJ Wrangler models only rear position. Each driveshaft is custom built using a center to center measurement provided by the customer. SYE Kit Required: A yoke style Slip Yoke Eliminator (SYE) kit must be installed on the transfer case for this driveshaft to work. If a Mega Short SYE has been installed, notify Adams

The Adams Driveshaft Heavy Duty Series Rear 1310 CV Driveshaft (part number ASDYJ-1310CVR-G) is custom manufactured for 1987–1993 Jeep YJ Wrangler models only — rear position. Each driveshaft is custom built using a center-to-center measurement provided by the customer.

SYE Kit Required: A yoke-style Slip Yoke Eliminator (SYE) kit must be installed on the transfer case for this driveshaft to work. If a Mega Short SYE has been installed, notify Adams Driveshaft at time of order as this will affect the driveshaft length.

Tire Size: Compatible with tires up to 35 inches tall. For tires larger than 35 inches, Adams Driveshaft recommends upgrading to their Extreme Duty 1310 Spicer Solid Series.

Construction: Built from 2" × .120 wall DOM tubing with greasable U-joints, a long slip-n-stub, and the strongest component castings available. A 1310 series U-joint is used at the axle. All components are sourced exclusively from Spicer and Neapco — two American manufacturers. Finished in gloss black show quality paint.

Important — Measurement May Be Required: Adams Driveshaft knows most YJ measurements, however due to varying lift sizes, differentials, and belly-up configurations a center-to-center measurement taken at ride height may be needed. 

What's in the Box:

• (1) Adams Driveshaft 1310 greasable U-joint Heavy Duty Series CV driveshaft — 2" × .120 wall DOM tubing
• (4) Grade 10 CV bolts with small heads for easy installation

Fitment: 1987–1993 Jeep YJ Wrangler — rear position only. Yoke-style SYE kit must be installed.

Part Number: ASDYJ-1310CVR-G

Weight: 24 lbs

Warranty: Lifetime warranty on welds and tubing if they break due to torque. No warranty if components break due to bad angles. U-joints and CV kit are wear items and must be greased every 3 months or 3,000 miles, whichever comes first — no warranty coverage without proper maintenance.