Pay in installments of $214.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 25 - Aug 30
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Williams AV FM ADA KIT FM ADA Compliance KitThe Williams Sound FM ADA Kit 1 is an economical solution for satisfying the Americans with Disabilities Act (ADA) requirements in a small environment. The ADA requires public facilities to provide equal access to people with disabilities, including those who may require hearing assistance. This kit provides everything needed for hearing accessibility in large venues such as auditoriums, theaters, conferences and houses of worship. The FM ADA Kit 1
The Williams Sound FM ADA Kit 1 is an economical solution for satisfying the Americans with Disabilities Act (ADA) requirements in a small environment. The ADA requires public facilities to provide equal access to people with disabilities, including those who may require hearing assistance. This kit provides everything needed for hearing accessibility in large venues such as auditoriums, theaters, conferences and houses of worship.
The FM ADA Kit 1 includes the PPA T27 transmitter, which broadcasts a speaker’s voice, music program or audio service wirelessly up to 1000 feet to a listening audience. The speaker simply connects a microphone with a 3.5mm plug into the unit to broadcast their voice, or connect to a sound system through a line-level (RCA) jack to broadcast music or other audio service.
The kit includes two R37 FM receiver operating on the 72-76 MHz frequency to pick up the broadcast, and earphone or neckloops for the listening to use.
Specifications
| Used with | PPA T45, PPA T55, PPA T55C, PPA T27 Transmitters |
| Connector type | Screw to PCB |
| Cable type | N/A |
| Nominal Impedance | 75 Ohms |
| Length | 9 inches |
EAR 013
| Plug | 3.5 mm mono |
| Cord length | 39 inches |
| Impedance | 32 Ohms |
| Frequency Range | 20 - 20kHz |
| Max input power | 5mV |
| Sensitivity | 128dB @ 1kHz |
| Driver size | 13 mm |
| Weight | 9g |
| Replacement earpad | EAR 015 |
NKL 001
| Color: | Black |
| Weight: | 1.5 oz |
| Length: | 18.5” cord |
| Connector: | NKL 001: 3.5 mm mono plug NKL 001-S: 3.5 mm stereo plug with ring disconnected |
| Impedance: | 8-16 Ohms |
| Input Power: | 500 mW max |
| Magnetic Field Strength: | 25 mW input at 1000 Hz produces 1.7 A/m 6” above the center of loop 85μW input produces 0.1 A/m (IEC Standard) |
| Approvals: | RoHS, WEEE |
| Warranty: | One Year |
PPA R37
| Dimensions: | 4.1" x 2.85" x 1.38" (104 x 72 x 35mm) |
| Weight: | 4.6oz (130g) with batteries. 2.6oz (73g) without batteries |
| Color: | Black |
| Battery Type: | (2) AA Alkaline or 2 x AA NiMH |
| Battery Life: | Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs |
| (2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx. 32 hrs | |
| Current Consumption: | 52mA nominal |
| Temperature Range: | – 0 to 50C |
| Channels | 17, accessed via seek button in battery compartment |
| Operating Freq.: | 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz* |
| Intermediate Freq.: | 75 kHz |
| FM Deviation: | 75 kHz |
| De-Emphasis: | 75 µS |
| LED Indicator: | Power: Green; Low Battery: Flashes Green |
| AFC Range: | ± 120 kHz |
| Sensitivity: | 2 µV at 12 dB Sinad with squelch defeated |
| Input Overload: | 100 mV |
| Frequency Response: | 200 – 15 kHz |
| Modulation: | FM, +/- 75 kHz peak deviation |
| Signal-to-Noise Ratio: | 65 dB min @ 100 uV |
| Receive Antenna: | Integral with earphone/headphone cord |
| Audio Output: | 35 mW max, peak into 16 ohms |
| Output Connector: | 3.5 mm stereo/mono phone jack |
| Earphone: | Earbud-type with foam cushion, 3.5 mm plug, 32 Ω |
| Auto Shut-off | Enters sleep mode after approx 6 mins of no RF signal |
| Approvals: | FCC, Industry Canada, RoHS, WEEE |
| Warranty: | Lifetime PLUS Limited Warranty, 90 Days on most accessories. |
PPA T27
| Dimensions [&] Weight: | 4.1" W x 6.1" L x 1.3" H (104.1 mm x 154.9 mm x 33 mm) |
| 7.8 oz. (221 g) | |
| Color: | Black |
| Power (U.S./Canada): | 105-130 VAC, 50-60 Hz, 3.2 W at 120 VAC |
| Operating Frequencies: | 72-76 MHz*: 72.1 (CH A), 72.2 (CH K), 72.3 (CH B), 72.4 (CH N), 72.5 (CH C), 72.6 (CH O), 72.7 (CH D), 72.8 (CH P), 72.9 (CH E), 74.7 (CH I), 75.3 (CH J), 75.4 (CH R), 75.5 (CH F), 75.6 (CH S), 75.7 (CH G), 75.8 (CH T), 75.9 (CH H) |
| Frequency Selector: | External switches, 17 channels (lockable) |
| RF Field Strength: | Does not exceed 80mV/m @ 3m |
| Nominal Range: | Up to 1000 feet (305 m) w/standard ANT 021 “rubber duckie" antenna or optional ANT 005 coaxial antenna. |
| Modulation: | FM, 75 kHz deviation (wide–band) max. |
| Stability: | ± .005% over 0-50˚C |
| Pre-Emphasis: | 75 µS |
| Frequency Response: | 85Hz - 14kHz ±3dB |
| Distortion: | 1% Max. THD |
| Signal to Noise Ratio: | 65 dB with R35 Receiver |
| Microphone Input: | 3.5mm mini phone jack, supplies +DC for electret mics |
| Mic Input Level: | 1–10 mV, nominal |
| Line-Level Input: | RCA Jack, Hi Z, unbal. |
| Line Input Level: | .1–1 Vrms, nominal |
| Input Attenuator: | Pot, screwdriver-adjustable |
| Antenna Outputs: | Thread mount for ANT 021 “rubber duckie" antenna or ANT 025 telescoping antenna RF connector for ANT 024 dipole or ANT 005 coaxial antenna |
| Approvals: | FCC including part 15*, Industry Canada, RoHS, WEEE |
| Warranty: | Lifetime PLUS Limited Warranty, 90 Days on most accessories. |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy