Techno-B BHTX Pre-Charged (R452a) Split Chiller Package 240VAC

Techno-B BHTX Pre-Charged (R452a) Split Chiller Package 240VACElectronic control panel. Expansion device with thermal expansion valve. Solid core filter on liquid line. Pre arrangement for room lighting connection and for door switch connection. Cable for door heater connection on all low temperature units. All the models are equipped with a fixed calibration low pressure switch; all three phase units and the model BHTN122 are also equipped with a fixed calibration high pressure switch, in accordance with the

• Electronic control panel.

• Expansion device with thermal expansion valve.

• Solid core filter on liquid line.

• Pre-arrangement for room lighting connection and for door switch connection.

• Cable for door heater connection on all low temperature units.

• All the models are equipped with a fixed calibration low pressure switch; all three-phase units and the model BHTN122 are also equipped with a fixed calibration high pressure switch, in accordance with the “Pressure Equipment Directive” 2014/68/UE. Anyway, on request the high pressure switch could be supplied also on units with voltage 230/1/50Hz.

• All the units are supplied with a remote control panel already connected to the unit through a 5 m long cable (on request we could supply different lengths up to 20 m).

• Direct drainage of condensate.

• Drain heater.

• Condensing unit installation on the external floor of the cold room as well as evaporator installation on the ceiling inside the cold room.

• Sight glass.

• All units are supplied with a liquid receiver, in accordance with the “Pressure Equipment Directive” 2014/68/UE.

• Connection pipes couplings between condensing unit and evaporator have been realized without shut-off valves or weld neck flanges.

• Units suitable for external installation. Units recommended for use at ambient temperatures higher than 10°C. If units are mounted in Ambient temperature lower than 10°C, some accessories are needed