SKU: 87859105806

Raymarine Cyclone Radar pedestal - 110W

$2786.80 $3096.45
Save 10%
No.2 Bestseller on salfueradeti.es >

Pay in installments of $774.11 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 12 - Aug 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Raymarine Cyclone Radar pedestal - 110WMax Range Scale: 96 nautical miles. Pedestal Weight: 16Kg Waterproof Rating: IPX6 Maximum Wind Speed: 100 Knots Power Consumption (Max): 195W Standby Power: 30W Solid State Open Array Marine Radar The ultimate expression of design rugged performance and unmatched situational awareness Cyclone solid state open array radars give mariners the confidence to tackle the harshest conditions gain the upper hand in the hunt for fish and navigate busy waterways

  • Max Range Scale: 96 nautical miles.
  • Pedestal Weight: 16Kg
  • Waterproof Rating: IPX6
  • Maximum Wind Speed: 100 Knots
  • Power Consumption (Max): 195W
  • Standby Power: 30W

Solid State Open Array Marine Radar

The ultimate expression of design rugged performance and unmatched situational awareness Cyclone solid-state open array radars give mariners the confidence to tackle the harshest conditions gain the upper hand in the hunt for fish and navigate busy waterways with confidence.

Cyclone radars deliver superior target separation and long-range resolution using CHIRP pulse compression and Raymarine beam sharpening technology. Each model features innovative detection capabilities including Cyclone Bird Mode RangeFusion technology and high speed 60 rpm imaging.

Cutting Edge Design

Aircraft Wing Inspired: Engineered for extremes with best-in-class 100-knot wind rating and designed to meet the commercial grade IEC 62388 standard for ship bourne radar.

Low Profile: At 13.1 inches (335 mm) tall Cyclone’s lower profile allows greater flexibility of boat architecture and more adaptable installation options.

Clean Installation: Innovative pedestal design conceals cable connections for a cleaner installation. Built in cable gland to allow sleeker design configuration to boat designers.

The Ultimate Situational Awareness

360 Degrees of Awareness: Fast 60 RPM rotational speed delivers 360 degrees of awareness and accurate target tracks in real-time.

Doppler Target Tracking: Doppler target tracking simplifies the interpretation of dangerous and safe targets for added safety.

Professional Grade ARPA: Professional grade ARPA target tracking. Cyclone automatically tracks up to 50 targets using the same advanced ARPA technology trusted by the United States Coast Guard.

Range Fusion: RangeFusion technology combines short and long pulses into the single high clarity radar image delivering exceptional short-range and long-range targets simultaneously.

Cyclone Birdmode Fishing Intelligence: Performance tuned for locating sea birds. Enhanced Cyclone Bird Mode uses CHIRP pulse compression technology to allow Cyclone to intelligently optimize gain and tune settings for imaging distant sea birds.

"
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 87859105806

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.8 ★★★★★
Based on 22 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
Joseph E. Brackman
Los Angeles, US
★★★★★ 4
Fantastic style, good stability, customizable finish, and great customer service
Size: M Desk Unfinished 3/4-in and 1/2-in
Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 23, 2020
R
Verified Purchase
Russel
West Palm Beach, US
★★★★★ 5
So nice I bought twice!
Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 23, 2019
C
Verified Purchase
Colauhu
Lexington, US
★★★★★ 5
Durable and sturdy. I bought two
Size: H Desk Unfinished 3/4-in and 1/2-in
Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 9, 2021
G
Verified Purchase
Gigi
Birmingham, US
★★★★★ 5
Great legs - sturdy when fully assembled with tabletop.
Size: H Desk Unfinished 3/4-in and 1/2-in
These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 4, 2020
T
Verified Purchase
Teresa Cloninger
Charlottesville, US
★★★★★ 5
Home bar cart
Color: Brown(24.8"w)
My son loves his gift. Fits perfectly in his den, versatile shelves, the perfect size. It’s a Quality bar cart that was easy to assemble and looks beautiful.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 24, 2026

recommand products

SGCA-348M Crystal Award
101.55
Premium Leather Passport Holder
17.33
Alien OTravel Adapter
10.54
Wasteland [Zendikar Expeditions]
100.27
Water Resist Bluetooth Speaker
12.45