75 GPD | 1.8x12 | DOW FilmTec Home RO Membrane Element

DOW FILMTEC™ BW60-1812-75 Home RO Membrane Element

DOW FILMTEC™ BW60-1812-75 Elements for home drinking water treatment units produce 75 GPD (12 L/h) of permeate with 99% stabilized salt rejection at standard test conditions. New BW60 membrane chemistry produces industry-leading 99% stabilized salt rejection. BW60-1812-75 are among the most reliable and consistent elements in the industry. They are shipped dry for convenient handling and long shelf-life. DOW FILMTEC BW60-1812-75 elements have been tested and certified by NSF International against NSF/ANSI Standard 58 for material requirements only for safe use in drinking water applications.

DOW FILMTEC BW60-1812-75 Elements is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.

Specifications for BW60-1812-75

Permeate flow and salt rejection based: 250ppm softened tap water, 77°F, 15% recovery, 50 psig.

Operating Limits for BW60-1812-75

*Maximum temperature for continuous operation above pH 10 is 95°F
**Under certain conditions, the presence of free chlorine and other oxidizing agents will cause premature membrane failure. Since oxidation damage is not covered under warranty, Dow recommends removing residual free chlorine by pretreatment prior to membrane exposure.

Related Products for use with BW60-1812-75

To change the daily production of your system, simply replace the membrane and the corresponding flow restrictor to the desired flow rate.

To use a FilmTec membrane in a system with a non-standard housing, simply replace membrane housing (and appropriate plumbing connections) with a standard housing.

• Under the sink water treatment
• Point-of-use reverse water treatment systems
• Production of home drinking water
• Office
• Aquariums

• Institutions
• Restaurants
• Ice Makers
• Labs
• Point of Use RO System