SKU: 70246518725

Audient ASP4816-SE Small Format In-Line Analog Recording Console

Sale price$11249.55 Regular price$12499.50
Save 10%

Pay in installments of $3124.88 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 21 - Aug 26

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Audient ASP4816-SE Small Format In-Line Analog Recording ConsoleAudio professionals looking for a mixing console with large frame capabilities in a small form factor will be thrilled with the Audient ASP4816 SE, a standard edition, in line, full analog, recording, and mixing console that provides everything you'd expect from a large format recording console, but in a space friendly footprint. Built from the ground up, the console was designed by David Dearden and features his legendary analog circuitry. The

Audio professionals looking for a mixing console with large-frame capabilities in a small form factor will be thrilled with the Audient ASP4816-SE, a standard-edition, in-line, full-analog, recording, and mixing console that provides everything you'd expect from a large-format recording console, but in a space-friendly footprint. Built from the ground up, the console was designed by David Dearden and features his legendary analog circuitry. The ASP4816-SE is the perfect centerpiece of any production studio.

At a Glance
  • 16 Audient mic preamps
  • 40 faders
  • 48 inputs at mix
  • 16 record buses
  • 8 subgroups
  • 42 inputs
  • 6 aux bus, 2 cue sends
  • In-line architecture—twin inputs on each channel
  • 4 stereo monitor outputs
  • Advanced monitor control
  • 4-band splitable EQ
  • Stereo VCA mix bus compressor
  • Footswitch for talkback control
Professional In-Line Analog Console
  • Designed to deliver ultralow noise and low distortion with a touch of classic analog warmth, ASP4816-SE’s 16 discrete hybrid Class-A preamps are ready to handle any microphone, instrument, or source you can throw at it.
  • With a flexible topology, offering up to 60 dB of gain and an incredibly wide bandwidth, ensuring your transient detail is accurately preserved in stunning resolution, the Audient preamp gives you a versatile and flexible solution ready for any session.
Mic Pre Technology
Designed by David Dearden (of DDA & Advision Studios) back in 1997, the Audient mic pre is an all-discrete high-grade op-amp design that delivers low noise, low distortion, and high common mode rejection at all gain levels, offering a faithful reproduction of the source with just enough color to give the signal some character.

 

  • Character: clean, punchy with a touch of warmth
  • Wide bandwidth: preserves your audios transient detail
  • Flexible topology: optimized gain range 0 to 70 dB gain
  • Low noise floor: 30,000 times quieter than the signal level
  • Circuitry: discrete Class-A high-grade op-amp design
  • Transformerless: RF immune input stage for detailed resolution
VCA Bus Compressor
  • Often likened to classic analog boards from the 80s, the Audient mix bus compressor does far more than just control levels, it adds weight, depth, and warmth to your mix as well as helping to glue your production together for a more polished result.
  • Featuring adjustable ratio and threshold controls, auto-release settings, and a gain reduction meter, the Audient mix bus compressor is more than equipped for adding those final touches to any production.
4-Band Audient EQ
Powerful and musical

 

  • The massively flexible Dearden designed EQ offers two fully parametric bands that span from 40 Hz to 20 kHz, are adjustable from -15 dB to + 15 dB and offer an adjustable Q control. These are flanked by low- and high-shelving EQ bands with the ability to engage the ‘Air’ button for that often-needed finishing sheen.

Splitable

  • The EQ can also be split across both the short and long faders, meaning you can EQ both your mic inputs and DAW returns at the same time, making it incredibly easy to start building your mix from the moment you start recording.
I/O Connections
  • The ASP4816-SE features an astounding amount of connectivity for such a compact frame size. With 48 channels, over 40 insert points, 8 sends, and 8 groups available on mixdown, the ASP4816-SE will handle the most comprehensive of mixing and tracking tasks.
  • And with so many sends, buses, and inserts available, when partnered with a suitable patchbay, the ASP4816-SE offers an incredible number of routing options for creative bouncing, summing, and parallel processing all with none of the problematic phase and latency issues that digital systems can have.
Flexible Routing
  • The ASP4816-SE makes signal flow a breeze with flexible routing, one knob per function, no menus or hidden features, and no need to worry about latency—making working on the console fast, intuitive, and most importantly, fun.
  • The console’s in-line architecture will let you start building your mix as you’re tracking. By using the long and short faders, you can create separate record and monitor paths on one channel strip, all while being able access the consoles splitable EQ and aux sends, ideal for getting it right from the start.
Monitor Control
A fully featured monitor control section offers full artist communication, footswitch enabled talkback control, solo in front, powerful source selection, and loudspeaker control with a short passive signal path for incredibly clear and accurate monitoring.

 

  • 4 stereo monitor outputs
  • Main mix + 3 stereo sources
  • 2 foldback outputs
  • Mono summing
  • Talkback functionality
Bigger Isn't Always Bigger
The ASP4816-SE utilizes clever circuit board design to provide you with the versatility and sound of a large-format recording console but in a beautiful, space-conscious package, making it the ideal analog console solution for even the smallest of studios.

Audient ASP4816 Specs

Mixer
Number of Analog Input Channels 42
Number of Mic Preamps 16
Analog Output Channels 16 x Mono Tape/Record Output
8 x Mono Bus/Subgroup Output
4 x Stereo Control Room/Monitor Output
Max I/O Capacity 42 x Input / 32 x Output
Mix Routing 8 x Mono Aux Send per Aux Bus/Subgroup
4 x Stereo Aux Return
Faders 32 x Channel Fader
8 x Bus/Subgroup Fader
1 x Master Fader
Meters Channel Meter:
16 x 20-Segment LED
Main Meter:
2 x Multi-Segment LED
Meter Range -30 dB to +18 dB Peak/Clip
Meter Calibration 0 VU on Meter = +4 dBu at Main Output
Signal Processing
Gain/Trim Range Mic:
+6 dB to +60 dB
Line:
-14 dB to +40 dB
Input Polarity Normal/Reverse
Dynamic Processing None
Compressor Parameters Bus:
Threshold: -20 to +20 dB
Ratio: 1:1 to 10:1
Attack: .1 ms to 30 ms
Release: .1 ms to 2.4 sec
Makeup Gain: 0 to 40 dB
EQ Input Channels:
4-Band EQ (Mono Channels)
EQ Parameters Mono Channels:
High: ±15 dB at 10 kHz to 18 kHz (Shelving)
Low: ±15 dB at 50 Hz to 100 Hz (Shelving)
Hi-Mid: ±15 dB at 450 Hz to 20 kHz, 3.8 to 0.65 Q (Parametric)
Lo-Mid: ±15 dB at 50 Hz to 1.5 kHz, 3.8 to 0.65 Q (Parametric)
Graphic EQ None
Filters Input Channels:
16 x High-Pass
Solo/Mute Solo-in-Place/AFL, Mute, PFL per Input Channel, Bus
Built-In Effects None
Performance
Headroom +14 dB
Frequency Response 20 Hz to 20 kHz +0/-3 dB
Max Input Level Mic Input:
+21 dBu at Min Gain (Balanced)
Line Input:
+30 dBu at Min Gain (Balanced)
Insert Return:
+21 dBu (Balanced)
Output Level Aux/Main/Subgroup Output:
+126 dBu at Max Gain (Balanced, 2 Kilohms)
Aux/Insert Send:
+120 dBu at Max Gain (Balanced, 2 Kilohms)
Crosstalk Mix/Bus Assign, Channel Fader Off:
> 90 dB at 1 kHz
CMRR Mic Input:
70 dB (Minimum Gain)
75 dB at Max Gain
THD+N Mic/Line Input to Main Output:
< 0.005%
Connectivity
Analog Inputs 16 x XLR 3-Pin Balanced Mic Input
16 x 1/4" TRS Balanced/Unbalanced Line Input
6 x XLR 3-Pin Balanced Stereo Playback Input (3 Stereo Pairs)
32 x 1/4" TRS Insert Return
Analog Outputs 3 x XLR 3-Pin Balanced Stereo Main Output (3 Stereo Pairs)
2 x 1/4" TRS Balanced Stereo Mix Send (2 Stereo Pairs)
32 x 1/4" TRS Insert Send
3 x DB-25 25-Pin Balanced Subgroup Output
Phantom Power +48 V, Selectable On/Off
Digital I/O None
Bluetooth None
Power
AC Input Power 90 to 264 VAC, 50 / 60 Hz
AC Power I/O 1 x IEC Input
Power Consumption 200 VA
Physical
Rack Mountable No
Dimensions 42.9 x 13.2 x 39.2" / 1090 x 335 x 995 mm
Weight 198 lb / 89.8 kg
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 70246518725

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
G
Gabriella
Massapequa, US
★★★★★ 5
Perfect!
Everything in the set feels high quality and fits my Robo perfectly. Installation was simple, and the pieces line up just like the original hardware. You get a lot for what you pay, so it feels like a really solid value at this price point.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 7, 2026
C
Cassie
Carnegie, US
★★★★★ 4
Pretty great set for the price! HOWEVER, the rotary brush doesn't fit.
This is a nice little set of replacement items for your C10 for the price. It's always good to have extra bags, brushes, and filters...especially if you live with multiple animals on a very dusty farm like I do! The filters, bags, and front brushes fit perfectly in Tilly (my Eufy C10), however the main vacuum rotary brush was too short and did not fit. You can see from my photos, I've compared it to the original brush for the vacuum and it is too short and the end fittings do not match up either. This is the only part of the set that didn't work for my vacuum. The rest of the set is acceptable quality for the price. The reason I gave this set 4 stars instead of 3 is because I actually PREFER these front brushes over the originals because they WORK BETTER than the originals. If the issue with the fit of the rotary brush is addressed, this would be a 5 star set of C10 replacement parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 24, 2026
M
manuel
Draper, US
★★★★★ 5
Perfect combo replacement parts.
These replacement parts fit my Eufy C10 without any issues and were easy to install. Everything snapped into place just like the original components, and I did not need any tools or adjustments. It was a quick refresh that had the vacuum back to normal cleaning right away. The main brush feels sturdy and does a good job picking up debris without getting tangled too quickly. The side brushes spin smoothly and reach edges and corners well. I also noticed that the filters fit securely and do not feel flimsy, which helps maintain suction and keeps fine dust contained. The dust bags are well made and install cleanly without gaps or leaks. After replacing the parts, the vacuum runs quietly and cleans more efficiently, especially on hard floors and along baseboards. It feels like routine maintenance that actually makes a noticeable difference in performance rather than just a cosmetic swap. Overall, this is a solid replacement kit that matches the original parts well. It is a convenient way to keep the robot vacuum running smoothly and is a good option if you want reliable performance without hassle.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2026
K
KFM
Draper, US
★★★★★ 5
Practically 1:1
This kit is pretty much the same quality you would expect if you ordered directly from Eufy, excepting the HEPA filters which are *slightly* larger, and kind of weak compared to the originals. Aside from the filters, though, these are all very high quality parts, and practically indistinguishable from anything you would get directly from the manufacturer. I went all in with these and replaced all of the original parts with these in one go a few weeks ago and the C10 is performing just as well as it did with the original parts. The size is spot on, the roller brush has the exact same functionality (unlike the ones I had ordered in the past for my 15C which scuffed up the unit), and the dust bags are functioning just like the originals, as well. I stuck the included cleaning brush off to the side in the base, and I use it to clean the unit every time I clean the HEPA filter. Honestly, you really can't beat this value, these are great quality, and so much cheaper than the original parts.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 24, 2026
R
Rich D.
Birmingham, US
★★★★★ 5
Great Value Replacement Kit for Eufy C10
I recently picked up the Eufy C10 robot vacuum and absolutely love it, so I was excited to find this accessory kit. This is a much more economical way to stock up on all the wear-and-tear parts your robot needs. Everything fits perfectly, the quality feels solid, and it includes all the essentials—main brush, side brushes, filters, and disposable dust bags. Having these on hand makes maintenance easy and keeps the vacuum running at peak performance. If you own a Eufy C10, this kit is a no-brainer. Pros • Excellent value compared to buying parts individually • Includes all common replacement items • Fits the Eufy C10 perfectly • Good build quality on brushes, filters, and bags • Easy snap-in replacement with no tools required Cons • None so far Verdict A smart and affordable way to maintain your Eufy C10. Everything you need in one kit, good quality, and great peace of mind. Highly recommended.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2026

recommand products