Pay in installments of $1695.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 29 - Sep 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Mark-10 Series F IntelliMESUR Advanced UTM (750 to 1,500 lbF)The Mark 10 F755 and F1505 force testers are designed for tension and compression force testing. The F755 has a 750 lbf capacity and the F1505 has a 1,500 lbf capacity. These test stands are available with a touchscreen that has the software already installed or software only to install on your own computer. Create and run a wide range of basic and multi step tests, including: Limit testing to a load, break, or distance Height measurement Load holding
The Mark-10 F755 and F1505 force testers are designed for tension and compression force testing. The F755 has a 750 lbf capacity and the F1505 has a 1,500 lbf capacity. These test stands are available with a touchscreen that has the software already installed or software only to install on your own computer.
Create and run a wide range of basic and multi-step tests, including:
- Limit testing to a load, break, or distance
- Height measurement
- Load holding
- Cycle testing
- Spring rate
- Load average
- Multi-step testing, utilizing any combination of the above functions
Run individual runs or batches, and view data in graphical format or results tables. Save or export data as needed, or generate a report.
Features
- Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
- Deflection compensation utility can be used to compensate for deflection within the grips and attachments. The deflection offset file can be associated with the test setup file.
- Collects load and travel data at up to 1,000 Hz, and allows up to 4 million data points per run.
- Save or export data automatically or manually. Save individual runs and results to a USB drive or file location of your choice.
- Manual control can be used tor running a quick test without having to create a test profile.
- Control user access with three different permission levels.
Specifications
| F755 | F755S | F1505 | F1505S | |
|
Load capacity: (see 1. below) |
750 lbF [3.4 kN] |
1,500 lbF [6.7 kN] |
||
| Maximum travel: | 32.0 in [813 mm] |
14.2 in [360 mm] |
32 in [813 mm] |
14.2 in [360 mm] |
| Speed range: | 0.001 - 60 in/min [0.02 - 1,525 mm/min] |
0.001 - 70 in/min [0.02 - 1,800 mm/min] |
||
|
Load accuracy (% of full scale) |
Test frame + force sensor, calibrated together: ±0.1% Test frame alone: ±0.1% Force sensor alone: Series FS05: ±0.1% | Series R07: ±0.15% |
|||
| Speed setting accuracy: | ±0.2% | |||
| Load sampling rate: | 20,000 Hz | |||
| Data acquisition rate: | 1,000 Hz | |||
| Speed accuracy: | ±0%, stepper motor driven | |||
| Distance accuracy: | ±0.002 in [0.05 mm], factory-compensated at up to full load | |||
| Distance resolution: | 0.0005 in [0.01 mm] | |||
| Limit switch repeatability: | ±0.001 in [0.03 mm] |
|||
| Power: | Universal input 100-240 VAC, 50/60 Hz, 120W | Universal input 100-240 VAC, 50/60 Hz, 450W | ||
| Fuse type: | 4A, 3AG, SLO BLO | |||
| Weight (test frame only): | 184 lb [83 kg] |
149 lb [68 kg] |
197 lb [89 kg] |
157 lb [71 kg] |
| Shipping weight: | 235 lb [107 kg] |
195 lb [88 kg] |
247 lb [112 kg] |
205 lb [93 kg] |
| Environmental conditions: | Indoor use only Up to 6,500 ft [2,000 m] above sea level Temperature range: 40 - 95°F [5 - 35°C] Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing Mains supply voltage fluctuations up to ±10 % of the nominal voltage Transient overvoltages up to the levels of Overvoltage Category II Use in environments up to Pollution Degree 2 |
|||
| Warranty: | 3 years [see individual statement for further details] | |||
| Conformance: | CE | |||
1. Load capacity is reduced at higher speeds, as follows:
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
2. May be extended via single- or double-column extensions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy