Powerweld® Flux Cored Welding Wire E71T-GS .030" X 10Lb Spool

Powerweld® Flux Cored Welding Wire E71T-GS .030" X 10Lb SpoolFeatures No Shielding Gas Needed Single Pass Welding of Thin Gauge Galvanized Steel Excellent for Outdoor Use Smooth Arc Minimal Spatter DC Straight Polarity Works Well In Wind Description PowerWeld gasless wire E71T GS is an all position, self shielded flux cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn through. Gasless wire E71T GS is commonly used on small portable 110 volt

Features

• No Shielding Gas Needed
• Single Pass Welding of Thin Gauge Galvanized Steel
• Excellent for Outdoor Use
• Smooth Arc – Minimal Spatter
• DC- Straight Polarity
• Works Well In Wind

Description

PowerWeld gasless wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

Applications

PowerWeld gasless wire E71T-GS is most popular for the home workshop welder because it works so well on 110 volt machines and can be used on thin gauge steel. Gasless wire E71T-GS is used quite extensively in automobile body shops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.

NOTE: As with all self-shielded wires, PowerWeld gasless wire E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.